From: Major A <andras.g.major@gmail.com>
To: u-boot@lists.denx.de
Subject: ZynqMP boot: no messages from SPL other than "Debug uart enabled"
Date: Thu, 12 Mar 2020 13:01:27 +0100 [thread overview]
Message-ID: <fe72d80f-94fa-981f-b9df-948558def130@gmail.com> (raw)
In-Reply-To: <d875e35a-3ee4-7df6-776e-dd22d9570ced@xilinx.com>
Hi Michal,
> export DEVICE_TREE=...
> should cause that CONFIG_DEFAULT_DEVICE_TREE will remain assigned to
> zcu100 but SPL/u-boot proper will be using zcu102.
>
> You can check it by looking at build folder ls spl/board/xilinx/zynqmp/
> where you see which psu_init was used (recommend to make mrproper before
> you check this to remove old builds)
OK, that seems to be the case.
> You should look at this.
> configurations {
> default = "config_17";
>
> config_17 {
> description = "zynqmp-zcu102-rev1.1";
> firmware = "atf";
> loadables = "uboot";
> fdt = "fdt_17";
> };
That's what SHOULD be there, but it isn't. "default" points to
"config_1", not 17. Why? And how do I change this (sorry for my
ignorance, but editing the file and rebuilding u-boot doesn't work
because the file gets overwritten)?
Cheers,
Andr?s
next prev parent reply other threads:[~2020-03-12 12:01 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 11:28 ZynqMP boot: no messages from SPL other than "Debug uart enabled" Major A
2020-03-12 8:15 ` Michal Simek
2020-03-12 9:12 ` Major A
2020-03-12 10:32 ` Michal Simek
2020-03-12 11:38 ` Major A
2020-03-12 11:44 ` Michal Simek
2020-03-12 12:01 ` Major A [this message]
2020-03-12 12:06 ` Michal Simek
2020-03-12 13:24 ` Major A
2020-03-12 13:31 ` Michal Simek
2020-03-12 14:19 ` Major A
2020-03-12 15:22 ` Michal Simek
2020-04-23 9:02 ` Major A
2020-04-24 12:14 ` Michal Simek
2020-04-27 22:00 ` Major A
2020-04-28 6:42 ` Michal Simek
2020-04-28 9:29 ` Major A
2020-04-28 9:33 ` Michal Simek
2020-04-28 10:53 ` Major A
2020-04-28 11:16 ` Michal Simek
2020-04-28 11:25 ` Major A
2020-04-28 11:29 ` Michal Simek
2020-04-28 13:34 ` Major A
2020-04-28 13:55 ` Michal Simek
2020-04-28 14:21 ` Major A
[not found] ` <3ab17480-431a-e0e3-c2af-e1639a2d07a6@xilinx.com>
[not found] ` <6b4c296f-fb91-fd84-f5c8-7b4f542034e4@gmail.com>
2020-04-30 10:20 ` Fwd: " Major A
[not found] ` <4f8b4b6a-c97d-38b8-5a74-98bbc916cb3a@xilinx.com>
2020-04-30 11:01 ` Major A
2020-04-30 11:03 ` Michal Simek
2020-04-30 11:10 ` Major A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fe72d80f-94fa-981f-b9df-948558def130@gmail.com \
--to=andras.g.major@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.