All of lore.kernel.org
 help / color / mirror / Atom feed
From: George Alexandru Dragoi <waruiinu@gmail.com>
To: netfilter@lists.netfilter.org
Subject: Re: Port 21, 23, and 80 are open according to Shields Up at grc.com
Date: Sun, 12 Sep 2004 02:14:58 +0300	[thread overview]
Message-ID: <3063e504091116141e3bf7f@mail.gmail.com> (raw)
In-Reply-To: <8ca42282040911160952abec3b@mail.gmail.com>

Maybe insecure.org has theyr own 192.168.0.0 private LAN :)


On Sat, 11 Sep 2004 19:09:11 -0400, Mike <1100100@gmail.com> wrote:
> Hi Group:
> 
> I've tested for open ports from all the LAN clients behind my linux
> box router/gateway/firewall and all of them come up with the same
> results: port 21, 23, and 80 are open according to the results of the
> Steve Gibson Shields Up test.
> 
> I can't figure out how this can be happening.
> I've run a full nmap -P0 (that's a zero) on all my local ip addresses
> - 192.168.169.*
> 
> You'll see below that the only ports open according to nmap on all the
> clients is Port 139.  This is appropriate as the box on 192.168.169.2
> is running a Samba server that all the clients connect to.
> 
> The box on 192.168.169.2 has Port 80 open because I run Apache as an
> intranet webserver.  It cannot be accessed from outside the firewall.
> Port 631 is open because that's the port that receives print jobs via
> the CUPS printserver.  The LAN clients send print jobs to the
> printserver via port 631.  Lastly, I had the X window system up and
> running when I ran nmap so you can see a port open for that.
> 
> But none of the clients, nor the gateway address on the routerbox
> (192.168.169.1) show port 21, 23, and 80 as open.
> 
> So, I'm left with some questions:
> 
> A) Is the Gibson test accurate or am I misunderstanding the results?
> B) Do I need to do another kind of diagnostic test using nmap?
> 
> Thank you for reading the long post.
> I appreciate the time and help.
> 
> Mike
> 
>                                           Starting nmap 3.55 (
> http://www.insecure.org/nmap/ ) at 2004-09-09 10:21 EDT
> All 1660 scanned ports on 192.168.169.0 are: filtered
> 
> All 1660 scanned ports on 192.168.169.1 are: filtered
> 
> Interesting ports on primary.us (192.168.169.2):
> (The 1655 ports scanned but not shown below are in state: closed)
> PORT     STATE SERVICE
> 80/tcp   open  http
> 139/tcp  open  netbios-ssn
> 631/tcp  open  ipp
> 6000/tcp open  X11
> 
> Interesting ports on 192.168.169.3:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXX (Intel)
> 
> Interesting ports on 192.168.169.4:
> (The 1658 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 135/tcp open  msrpc
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXX (3com)
> 
> Interesting ports on 192.168.169.5:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXXXX (Netgear)
> 
> Interesting ports on 192.168.169.6:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXX (The Linksys Group)
> 
> Interesting ports on 192.168.169.7:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXX (3com)
> 
> All 1660 scanned ports on 192.168.169.8 are: filtered
> 
> Interesting ports on 192.168.169.9:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXX (Hsing TECH. Enterprise CO.)
> 
> Interesting ports on 192.168.169.10:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXXXX (Hsing TECH. Enterprise CO.)
> 
> All 1660 scanned ports on 192.168.169.11 are: filtered
> 
> All 1660 scanned ports on 192.168.169.12 are: filtered
> 
> Interesting ports on 192.168.169.13:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXX (Micro-star International CO.)
> 
> Interesting ports on 192.168.169.14:
> (The 1658 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 135/tcp open  msrpc
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXXXXX (The Linksys Group)
> 
> Interesting ports on 192.168.169.15:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXX (Intel - Hf1-06)
> 
> Interesting ports on 192.168.169.16:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXXX (Micro-star International CO.)
> 
> Interesting ports on 192.168.169.17:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXXX (Micro-star International CO.)
> 
> Interesting ports on 192.168.169.18:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXXXXXXX (Micro-star International CO.)
> 
> Interesting ports on 192.168.169.19:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXX (Micro-star International CO.)
> 
> Interesting ports on 192.168.169.20:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXXXXX (Micro-star International CO.)
> 
> All 1660 scanned ports on 192.168.169.21 are: filtered
> 
> Interesting ports on 192.168.169.22:
> (The 1659 ports scanned but not shown below are in state: closed)
> PORT    STATE SERVICE
> 139/tcp open  netbios-ssn
> MAC Address: XXXXXXXXXXXX (Micro-star International CO.)
> 
> All 1660 scanned ports on 192.168.169.23 are: filtered
> 
> All 1660 scanned ports on 192.168.169.24 are: filtered
> 
> -----------<<<snip>>>-------------------------
> 
> 



-- 
Bla bla


  reply	other threads:[~2004-09-11 23:14 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-09-11 18:50 MAC addresses Darren Kirby
2004-09-11 20:01 ` active
2004-09-13 15:57   ` Jose Maria Lopez
2004-09-13 20:03     ` srg
2004-09-11 21:31 ` Frank Gruellich
2004-09-11 22:23 ` Jason Opperisano
2004-09-12  0:26   ` Darren Kirby
2004-09-12  0:54     ` Jason Opperisano
2004-09-12  1:14       ` Darren Kirby
2004-09-12  2:30       ` Chris Brenton
2004-09-12 23:09         ` Darren Kirby
2004-09-11 23:09 ` Port 21, 23, and 80 are open according to Shields Up at grc.com Mike
2004-09-11 23:14   ` George Alexandru Dragoi [this message]
2004-09-12  7:38     ` Mike
2004-09-13  1:15       ` George Alexandru Dragoi
2004-09-13 12:35         ` Mike
2004-09-14  1:01           ` Nick Drage
2004-09-13 12:53   ` Jason Opperisano
2004-09-13 15:18     ` Mike
2004-09-13 21:22     ` James B. Hiller
2004-09-13 23:47       ` Mike
2004-09-14  5:09         ` Mike
2004-09-14  0:12     ` <SOLVED>Port " Mike
  -- strict thread matches above, loose matches on Subject: below --
2004-09-13 15:21 Port " Miguel Laborde
2004-09-13 15:39 ` Mike
2004-09-13 16:04 ` Jose Maria Lopez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3063e504091116141e3bf7f@mail.gmail.com \
    --to=waruiinu@gmail.com \
    --cc=netfilter@lists.netfilter.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.