From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/5] ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT
Date: Fri, 30 Nov 2012 12:30:44 +0000 [thread overview]
Message-ID: <3094701.LTMQnxTPNp@avalon> (raw)
In-Reply-To: <1354265085-2444-4-git-send-email-horms@verge.net.au>
Hi Simon,
Thank you for the patch.
On Friday 30 November 2012 17:44:43 Simon Horman wrote:
> From: Simon Horman <horms+renesas@verge.net.au>
>
> This device also requires a voltage regulator which
> should be defined in a board-specific maner. An example
> dts snipped follows.
>
> / {
> fixedregulator1v8: fixedregulator@0 {
> compatible = "regulator-fixed";
> regulator-name = "fixed-1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
> };
>
> &mmcif {
> vmmc-supply = <&fixedregulator1v8>;
> vqmmc-supply = <&fixedregulator1v8>;
> };
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> ---
>
> v2
> * Removed SDHI intitialisation as the driver needs updating first
> * Moved MMC DT from sh73a0.dtsi to sh73a0-reference.dtsi
> as it is not appropriate for use by sh73a0-kzm9g.dts yet.
> This is because sh73a0-kzm9g.dts and board-kzm9g.c use
> both the GIC and INTC interrupt controllers to provide
> access to a rich set of devices. This is achieved by initilising
> the interrupt controllers using C code. Work on allowing the INC
> controller to be initialised using DT is in progress, however,
> until that is complete only GIC may be initialised using DT.
> * Add extra entries to clock-sh73a0.c:lookups[] and
> remove auxdata. Ultimtely the clocks will be described
> in DT, but the code isn't there yet.
Could you please add this as a TO-DO item either in the commit message or in
arch/arm/mach-shmobile/clock-sh73a0.c ?
> ---
> arch/arm/boot/dts/sh73a0-reference.dtsi | 24 ++++++++++++++++++++++++
> arch/arm/mach-shmobile/clock-sh73a0.c | 1 +
> 2 files changed, 25 insertions(+)
> create mode 100644 arch/arm/boot/dts/sh73a0-reference.dtsi
>
> diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi
> b/arch/arm/boot/dts/sh73a0-reference.dtsi new file mode 100644
> index 0000000..d4bb012
> --- /dev/null
> +++ b/arch/arm/boot/dts/sh73a0-reference.dtsi
> @@ -0,0 +1,24 @@
> +/*
> + * Device Tree Source for the SH73A0 SoC
> + *
> + * Copyright (C) 2012 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/include/ "sh73a0.dtsi"
> +
> +/ {
> + compatible = "renesas,sh73a0";
> +
> + mmcif: mmcif@0x10010000 {
> + compatible = "renesas,sh-mmcif";
> + reg = <0xe6bd0000 0x100>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 140 0x4
> + 0 141 0x4>;
> + reg-io-width = <4>;
> + };
> +};
> diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c
> b/arch/arm/mach-shmobile/clock-sh73a0.c index 8bc7a2b..0908123 100644
> --- a/arch/arm/mach-shmobile/clock-sh73a0.c
> +++ b/arch/arm/mach-shmobile/clock-sh73a0.c
> @@ -576,6 +576,7 @@ static struct clk_lookup lookups[] = {
> CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
> CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
> CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
> + CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
> CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
> CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
> CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT
Date: Fri, 30 Nov 2012 13:30:44 +0100 [thread overview]
Message-ID: <3094701.LTMQnxTPNp@avalon> (raw)
In-Reply-To: <1354265085-2444-4-git-send-email-horms@verge.net.au>
Hi Simon,
Thank you for the patch.
On Friday 30 November 2012 17:44:43 Simon Horman wrote:
> From: Simon Horman <horms+renesas@verge.net.au>
>
> This device also requires a voltage regulator which
> should be defined in a board-specific maner. An example
> dts snipped follows.
>
> / {
> fixedregulator1v8: fixedregulator at 0 {
> compatible = "regulator-fixed";
> regulator-name = "fixed-1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
> };
>
> &mmcif {
> vmmc-supply = <&fixedregulator1v8>;
> vqmmc-supply = <&fixedregulator1v8>;
> };
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> ---
>
> v2
> * Removed SDHI intitialisation as the driver needs updating first
> * Moved MMC DT from sh73a0.dtsi to sh73a0-reference.dtsi
> as it is not appropriate for use by sh73a0-kzm9g.dts yet.
> This is because sh73a0-kzm9g.dts and board-kzm9g.c use
> both the GIC and INTC interrupt controllers to provide
> access to a rich set of devices. This is achieved by initilising
> the interrupt controllers using C code. Work on allowing the INC
> controller to be initialised using DT is in progress, however,
> until that is complete only GIC may be initialised using DT.
> * Add extra entries to clock-sh73a0.c:lookups[] and
> remove auxdata. Ultimtely the clocks will be described
> in DT, but the code isn't there yet.
Could you please add this as a TO-DO item either in the commit message or in
arch/arm/mach-shmobile/clock-sh73a0.c ?
> ---
> arch/arm/boot/dts/sh73a0-reference.dtsi | 24 ++++++++++++++++++++++++
> arch/arm/mach-shmobile/clock-sh73a0.c | 1 +
> 2 files changed, 25 insertions(+)
> create mode 100644 arch/arm/boot/dts/sh73a0-reference.dtsi
>
> diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi
> b/arch/arm/boot/dts/sh73a0-reference.dtsi new file mode 100644
> index 0000000..d4bb012
> --- /dev/null
> +++ b/arch/arm/boot/dts/sh73a0-reference.dtsi
> @@ -0,0 +1,24 @@
> +/*
> + * Device Tree Source for the SH73A0 SoC
> + *
> + * Copyright (C) 2012 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/include/ "sh73a0.dtsi"
> +
> +/ {
> + compatible = "renesas,sh73a0";
> +
> + mmcif: mmcif at 0x10010000 {
> + compatible = "renesas,sh-mmcif";
> + reg = <0xe6bd0000 0x100>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 140 0x4
> + 0 141 0x4>;
> + reg-io-width = <4>;
> + };
> +};
> diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c
> b/arch/arm/mach-shmobile/clock-sh73a0.c index 8bc7a2b..0908123 100644
> --- a/arch/arm/mach-shmobile/clock-sh73a0.c
> +++ b/arch/arm/mach-shmobile/clock-sh73a0.c
> @@ -576,6 +576,7 @@ static struct clk_lookup lookups[] = {
> CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
> CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
> CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
> + CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
> CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
> CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
> CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2012-11-30 12:30 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-30 8:44 [PATCH 0/7 v2] ARM: mach-shmobile: kzm9g: Reference DT implementation Simon Horman
2012-11-30 8:44 ` Simon Horman
2012-11-30 8:44 ` [PATCH 1/5] ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT Simon Horman
2012-11-30 8:44 ` Simon Horman
2012-11-30 8:44 ` [PATCH 2/5] ARM: mach-shmobile: sh73a0: Minimal setup using DT Simon Horman
2012-11-30 8:44 ` Simon Horman
2012-11-30 8:44 ` [PATCH 3/5] ARM: mach-shmobile: sh73a0: Initialise MMCIF " Simon Horman
2012-11-30 8:44 ` Simon Horman
2012-11-30 12:30 ` Laurent Pinchart [this message]
2012-11-30 12:30 ` Laurent Pinchart
2012-12-01 0:27 ` Simon Horman
2012-12-01 0:27 ` Simon Horman
2012-11-30 8:44 ` [PATCH 4/5] ARM: shmobile: kzm9g: use voltage regulators by default Simon Horman
2012-11-30 8:44 ` Simon Horman
2012-11-30 8:44 ` [PATCH 5/5] ARM: mach-shmobile: kzm9g: Reference DT implementation Simon Horman
2012-11-30 8:44 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3094701.LTMQnxTPNp@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.