* [PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() [not found] <20151119214304.GA16713@d830.WORKGROUP> @ 2015-11-25 0:44 ` Alison Schofield 2016-02-18 5:29 ` [RESEND PATCH " Alison Schofield 1 sibling, 0 replies; 7+ messages in thread From: Alison Schofield @ 2015-11-25 0:44 UTC (permalink / raw) To: achim_leubner, JBottomley, linux-scsi, linux-kernel, y2038 struct timeval will overflow on 32-bit systems in y2038 and is being removed from the kernel. Replace the use of struct timeval and do_gettimeofday() with ktime_get_real_seconds() which provides a 64-bit seconds value and is y2038 safe. gdth driver requires changes in two areas: 1) gdth_store_event() loads two u32 timestamp fields for ioctl GDTIOCTL_EVENT These timestamp fields are part of struct gdth_evt_str used for passing event data to userspace. At the first instance of an event we do (first_stamp=last_stamp="current time"). If that same event repeats, we do (last_stamp="current time") AND increment same_count to indicate how many times the event has repeated since first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to extend the timestamp fields to y2106. Beyond y2106, the userspace tools (ie. RAID controller monitors) can work around the time rollover and this driver would still not need to change. Alternative: The alternative approach is to introduce a new ioctl in gdth with the u32 time fields defined as u64. This would require userspace changes now, but not in y2106. 2) gdth_show_info() calculates elapsed time using u32 first_stamp It is adding events with timestamps to a seq_file. Timestamps are calculated as the "current time" minus the first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to calculate the timestamp. This elapsed time calculation is safe even when the time wraps (beyond y2106) due to how unsigned subtraction works. A comment has been added to the code to indicate this safety. Alternative: This piece itself doesn't warrant an alternative, but if we do introduce a new structure & ioctl with u64 timestamps, this would change accordingly. Signed-off-by: Alison Schofield <amsfield22@gmail.com> --- Changes in v2: - remove unnecessary ktime.h includes - add comment in code to explain elapsed time calculation - add detail and alternatives to changelog drivers/scsi/gdth.c | 7 ++----- drivers/scsi/gdth_proc.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 71e1380..0a76774 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -2838,7 +2838,6 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, u16 idx, gdth_evt_data *evt) { gdth_evt_str *e; - struct timeval tv; /* no GDTH_LOCK_HA() ! */ TRACE2(("gdth_store_event() source %d idx %d\n", source, idx)); @@ -2854,8 +2853,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, !strcmp((char *)&ebuffer[elastidx].event_data.event_string, (char *)&evt->event_string)))) { e = &ebuffer[elastidx]; - do_gettimeofday(&tv); - e->last_stamp = tv.tv_sec; + e->last_stamp = (u32)ktime_get_real_seconds(); ++e->same_count; } else { if (ebuffer[elastidx].event_source != 0) { /* entry not free ? */ @@ -2871,8 +2869,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, e = &ebuffer[elastidx]; e->event_source = source; e->event_idx = idx; - do_gettimeofday(&tv); - e->first_stamp = e->last_stamp = tv.tv_sec; + e->first_stamp = e->last_stamp = (u32)ktime_get_real_seconds(); e->same_count = 1; e->event_data = *evt; e->application = 0; diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c index e66e997..be609db 100644 --- a/drivers/scsi/gdth_proc.c +++ b/drivers/scsi/gdth_proc.c @@ -148,7 +148,6 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) gdth_cmd_str *gdtcmd; gdth_evt_str *estr; char hrec[161]; - struct timeval tv; char *buf; gdth_dskstat_str *pds; @@ -540,8 +539,14 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) if (estr->event_data.eu.driver.ionode == ha->hanum && estr->event_source == ES_ASYNC) { gdth_log_event(&estr->event_data, hrec); - do_gettimeofday(&tv); - sec = (int)(tv.tv_sec - estr->first_stamp); + + /* + * Elapsed seconds subtraction with unsigned operands is + * safe from wrap around in year 2106. Executes as: + * operand a + (2's complement operand b) + 1 + */ + + sec = (int)((u32)ktime_get_real_seconds() - estr->first_stamp); if (sec < 0) sec = 0; seq_printf(m," date- %02d:%02d:%02d\t%s\n", sec/3600, sec%3600/60, sec%60, hrec); -- 2.1.4 _______________________________________________ Y2038 mailing list Y2038@lists.linaro.org https://lists.linaro.org/mailman/listinfo/y2038 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() @ 2015-11-25 0:44 ` Alison Schofield 0 siblings, 0 replies; 7+ messages in thread From: Alison Schofield @ 2015-11-25 0:44 UTC (permalink / raw) To: achim_leubner, JBottomley, linux-scsi, linux-kernel, y2038 struct timeval will overflow on 32-bit systems in y2038 and is being removed from the kernel. Replace the use of struct timeval and do_gettimeofday() with ktime_get_real_seconds() which provides a 64-bit seconds value and is y2038 safe. gdth driver requires changes in two areas: 1) gdth_store_event() loads two u32 timestamp fields for ioctl GDTIOCTL_EVENT These timestamp fields are part of struct gdth_evt_str used for passing event data to userspace. At the first instance of an event we do (first_stamp=last_stamp="current time"). If that same event repeats, we do (last_stamp="current time") AND increment same_count to indicate how many times the event has repeated since first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to extend the timestamp fields to y2106. Beyond y2106, the userspace tools (ie. RAID controller monitors) can work around the time rollover and this driver would still not need to change. Alternative: The alternative approach is to introduce a new ioctl in gdth with the u32 time fields defined as u64. This would require userspace changes now, but not in y2106. 2) gdth_show_info() calculates elapsed time using u32 first_stamp It is adding events with timestamps to a seq_file. Timestamps are calculated as the "current time" minus the first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to calculate the timestamp. This elapsed time calculation is safe even when the time wraps (beyond y2106) due to how unsigned subtraction works. A comment has been added to the code to indicate this safety. Alternative: This piece itself doesn't warrant an alternative, but if we do introduce a new structure & ioctl with u64 timestamps, this would change accordingly. Signed-off-by: Alison Schofield <amsfield22@gmail.com> --- Changes in v2: - remove unnecessary ktime.h includes - add comment in code to explain elapsed time calculation - add detail and alternatives to changelog drivers/scsi/gdth.c | 7 ++----- drivers/scsi/gdth_proc.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 71e1380..0a76774 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -2838,7 +2838,6 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, u16 idx, gdth_evt_data *evt) { gdth_evt_str *e; - struct timeval tv; /* no GDTH_LOCK_HA() ! */ TRACE2(("gdth_store_event() source %d idx %d\n", source, idx)); @@ -2854,8 +2853,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, !strcmp((char *)&ebuffer[elastidx].event_data.event_string, (char *)&evt->event_string)))) { e = &ebuffer[elastidx]; - do_gettimeofday(&tv); - e->last_stamp = tv.tv_sec; + e->last_stamp = (u32)ktime_get_real_seconds(); ++e->same_count; } else { if (ebuffer[elastidx].event_source != 0) { /* entry not free ? */ @@ -2871,8 +2869,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, e = &ebuffer[elastidx]; e->event_source = source; e->event_idx = idx; - do_gettimeofday(&tv); - e->first_stamp = e->last_stamp = tv.tv_sec; + e->first_stamp = e->last_stamp = (u32)ktime_get_real_seconds(); e->same_count = 1; e->event_data = *evt; e->application = 0; diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c index e66e997..be609db 100644 --- a/drivers/scsi/gdth_proc.c +++ b/drivers/scsi/gdth_proc.c @@ -148,7 +148,6 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) gdth_cmd_str *gdtcmd; gdth_evt_str *estr; char hrec[161]; - struct timeval tv; char *buf; gdth_dskstat_str *pds; @@ -540,8 +539,14 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) if (estr->event_data.eu.driver.ionode == ha->hanum && estr->event_source == ES_ASYNC) { gdth_log_event(&estr->event_data, hrec); - do_gettimeofday(&tv); - sec = (int)(tv.tv_sec - estr->first_stamp); + + /* + * Elapsed seconds subtraction with unsigned operands is + * safe from wrap around in year 2106. Executes as: + * operand a + (2's complement operand b) + 1 + */ + + sec = (int)((u32)ktime_get_real_seconds() - estr->first_stamp); if (sec < 0) sec = 0; seq_printf(m," date- %02d:%02d:%02d\t%s\n", sec/3600, sec%3600/60, sec%60, hrec); -- 2.1.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() 2015-11-25 0:44 ` Alison Schofield @ 2015-11-25 9:03 ` Arnd Bergmann -1 siblings, 0 replies; 7+ messages in thread From: Arnd Bergmann @ 2015-11-25 9:03 UTC (permalink / raw) To: y2038; +Cc: achim_leubner, JBottomley, Alison Schofield, linux-kernel, linux-scsi On Tuesday 24 November 2015 16:44:07 Alison Schofield wrote: > struct timeval will overflow on 32-bit systems in y2038 and is being > removed from the kernel. Replace the use of struct timeval and > do_gettimeofday() with ktime_get_real_seconds() which provides a 64-bit > seconds value and is y2038 safe. > > gdth driver requires changes in two areas: > > 1) gdth_store_event() loads two u32 timestamp fields for ioctl GDTIOCTL_EVENT > > These timestamp fields are part of struct gdth_evt_str used for passing > event data to userspace. At the first instance of an event we do > (first_stamp=last_stamp="current time"). If that same event repeats, > we do (last_stamp="current time") AND increment same_count to indicate > how many times the event has repeated since first_stamp. > > This patch replaces the use of timeval and do_gettimeofday() with > ktime_get_real_seconds() cast to u32 to extend the timestamp fields > to y2106. > > Beyond y2106, the userspace tools (ie. RAID controller monitors) can > work around the time rollover and this driver would still not need to > change. > > Alternative: The alternative approach is to introduce a new ioctl in gdth > with the u32 time fields defined as u64. This would require userspace > changes now, but not in y2106. > > 2) gdth_show_info() calculates elapsed time using u32 first_stamp > > It is adding events with timestamps to a seq_file. Timestamps are > calculated as the "current time" minus the first_stamp. > > This patch replaces the use of timeval and do_gettimeofday() with > ktime_get_real_seconds() cast to u32 to calculate the timestamp. > > This elapsed time calculation is safe even when the time wraps (beyond > y2106) due to how unsigned subtraction works. A comment has been added > to the code to indicate this safety. > > Alternative: This piece itself doesn't warrant an alternative, but > if we do introduce a new structure & ioctl with u64 timestamps, this > would change accordingly. > > Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> _______________________________________________ Y2038 mailing list Y2038@lists.linaro.org https://lists.linaro.org/mailman/listinfo/y2038 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Y2038] [PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() @ 2015-11-25 9:03 ` Arnd Bergmann 0 siblings, 0 replies; 7+ messages in thread From: Arnd Bergmann @ 2015-11-25 9:03 UTC (permalink / raw) To: y2038; +Cc: Alison Schofield, achim_leubner, JBottomley, linux-scsi, linux-kernel On Tuesday 24 November 2015 16:44:07 Alison Schofield wrote: > struct timeval will overflow on 32-bit systems in y2038 and is being > removed from the kernel. Replace the use of struct timeval and > do_gettimeofday() with ktime_get_real_seconds() which provides a 64-bit > seconds value and is y2038 safe. > > gdth driver requires changes in two areas: > > 1) gdth_store_event() loads two u32 timestamp fields for ioctl GDTIOCTL_EVENT > > These timestamp fields are part of struct gdth_evt_str used for passing > event data to userspace. At the first instance of an event we do > (first_stamp=last_stamp="current time"). If that same event repeats, > we do (last_stamp="current time") AND increment same_count to indicate > how many times the event has repeated since first_stamp. > > This patch replaces the use of timeval and do_gettimeofday() with > ktime_get_real_seconds() cast to u32 to extend the timestamp fields > to y2106. > > Beyond y2106, the userspace tools (ie. RAID controller monitors) can > work around the time rollover and this driver would still not need to > change. > > Alternative: The alternative approach is to introduce a new ioctl in gdth > with the u32 time fields defined as u64. This would require userspace > changes now, but not in y2106. > > 2) gdth_show_info() calculates elapsed time using u32 first_stamp > > It is adding events with timestamps to a seq_file. Timestamps are > calculated as the "current time" minus the first_stamp. > > This patch replaces the use of timeval and do_gettimeofday() with > ktime_get_real_seconds() cast to u32 to calculate the timestamp. > > This elapsed time calculation is safe even when the time wraps (beyond > y2106) due to how unsigned subtraction works. A comment has been added > to the code to indicate this safety. > > Alternative: This piece itself doesn't warrant an alternative, but > if we do introduce a new structure & ioctl with u64 timestamps, this > would change accordingly. > > Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RESEND PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() [not found] <20151119214304.GA16713@d830.WORKGROUP> 2015-11-25 0:44 ` Alison Schofield @ 2016-02-18 5:29 ` Alison Schofield 2016-02-26 2:17 ` Martin K. Petersen 1 sibling, 1 reply; 7+ messages in thread From: Alison Schofield @ 2016-02-18 5:29 UTC (permalink / raw) To: achim_leubner, martin.petersen, JBottomley, linux-scsi, linux-kernel, y2038 struct timeval will overflow on 32-bit systems in y2038 and is being removed from the kernel. Replace the use of struct timeval and do_gettimeofday() with ktime_get_real_seconds() which provides a 64-bit seconds value and is y2038 safe. gdth driver requires changes in two areas: 1) gdth_store_event() loads two u32 timestamp fields for ioctl GDTIOCTL_EVENT These timestamp fields are part of struct gdth_evt_str used for passing event data to userspace. At the first instance of an event we do (first_stamp=last_stamp="current time"). If that same event repeats, we do (last_stamp="current time") AND increment same_count to indicate how many times the event has repeated since first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to extend the timestamp fields to y2106. Beyond y2106, the userspace tools (ie. RAID controller monitors) can work around the time rollover and this driver would still not need to change. Alternative: The alternative approach is to introduce a new ioctl in gdth with the u32 time fields defined as u64. This would require userspace changes now, but not in y2106. 2) gdth_show_info() calculates elapsed time using u32 first_stamp It is adding events with timestamps to a seq_file. Timestamps are calculated as the "current time" minus the first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to calculate the timestamp. This elapsed time calculation is safe even when the time wraps (beyond y2106) due to how unsigned subtraction works. A comment has been added to the code to indicate this safety. Alternative: This piece itself doesn't warrant an alternative, but if we do introduce a new structure & ioctl with u64 timestamps, this would change accordingly. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> --- Changes in v2: - remove unnecessary ktime.h includes - add comment in code to explain elapsed time calculation - add detail and alternatives to changelog drivers/scsi/gdth.c | 7 ++----- drivers/scsi/gdth_proc.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 71e1380..0a76774 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -2838,7 +2838,6 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, u16 idx, gdth_evt_data *evt) { gdth_evt_str *e; - struct timeval tv; /* no GDTH_LOCK_HA() ! */ TRACE2(("gdth_store_event() source %d idx %d\n", source, idx)); @@ -2854,8 +2853,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, !strcmp((char *)&ebuffer[elastidx].event_data.event_string, (char *)&evt->event_string)))) { e = &ebuffer[elastidx]; - do_gettimeofday(&tv); - e->last_stamp = tv.tv_sec; + e->last_stamp = (u32)ktime_get_real_seconds(); ++e->same_count; } else { if (ebuffer[elastidx].event_source != 0) { /* entry not free ? */ @@ -2871,8 +2869,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, e = &ebuffer[elastidx]; e->event_source = source; e->event_idx = idx; - do_gettimeofday(&tv); - e->first_stamp = e->last_stamp = tv.tv_sec; + e->first_stamp = e->last_stamp = (u32)ktime_get_real_seconds(); e->same_count = 1; e->event_data = *evt; e->application = 0; diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c index e66e997..be609db 100644 --- a/drivers/scsi/gdth_proc.c +++ b/drivers/scsi/gdth_proc.c @@ -148,7 +148,6 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) gdth_cmd_str *gdtcmd; gdth_evt_str *estr; char hrec[161]; - struct timeval tv; char *buf; gdth_dskstat_str *pds; @@ -540,8 +539,14 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) if (estr->event_data.eu.driver.ionode == ha->hanum && estr->event_source == ES_ASYNC) { gdth_log_event(&estr->event_data, hrec); - do_gettimeofday(&tv); - sec = (int)(tv.tv_sec - estr->first_stamp); + + /* + * Elapsed seconds subtraction with unsigned operands is + * safe from wrap around in year 2106. Executes as: + * operand a + (2's complement operand b) + 1 + */ + + sec = (int)((u32)ktime_get_real_seconds() - estr->first_stamp); if (sec < 0) sec = 0; seq_printf(m," date- %02d:%02d:%02d\t%s\n", sec/3600, sec%3600/60, sec%60, hrec); -- 2.1.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() 2016-02-18 5:29 ` [RESEND PATCH " Alison Schofield @ 2016-02-26 2:17 ` Martin K. Petersen 0 siblings, 0 replies; 7+ messages in thread From: Martin K. Petersen @ 2016-02-26 2:17 UTC (permalink / raw) To: Alison Schofield Cc: y2038, linux-kernel, martin.petersen, achim_leubner, linux-scsi >>>>> "Alison" == Alison Schofield <amsfield22@gmail.com> writes: Alison> struct timeval will overflow on 32-bit systems in y2038 and is Alison> being removed from the kernel. Replace the use of struct timeval Alison> and do_gettimeofday() with ktime_get_real_seconds() which Alison> provides a 64-bit seconds value and is y2038 safe. Applied to 4.6/scsi-queue. -- Martin K. Petersen Oracle Linux Engineering _______________________________________________ Y2038 mailing list Y2038@lists.linaro.org https://lists.linaro.org/mailman/listinfo/y2038 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() @ 2016-02-26 2:17 ` Martin K. Petersen 0 siblings, 0 replies; 7+ messages in thread From: Martin K. Petersen @ 2016-02-26 2:17 UTC (permalink / raw) To: Alison Schofield Cc: achim_leubner, martin.petersen, linux-scsi, linux-kernel, y2038 >>>>> "Alison" == Alison Schofield <amsfield22@gmail.com> writes: Alison> struct timeval will overflow on 32-bit systems in y2038 and is Alison> being removed from the kernel. Replace the use of struct timeval Alison> and do_gettimeofday() with ktime_get_real_seconds() which Alison> provides a 64-bit seconds value and is y2038 safe. Applied to 4.6/scsi-queue. -- Martin K. Petersen Oracle Linux Engineering ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-02-26 2:17 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20151119214304.GA16713@d830.WORKGROUP>
2015-11-25 0:44 ` [PATCH v2] scsi: gdth: replace struct timeval with ktime_get_real_seconds() Alison Schofield
2015-11-25 0:44 ` Alison Schofield
2015-11-25 9:03 ` Arnd Bergmann
2015-11-25 9:03 ` [Y2038] " Arnd Bergmann
2016-02-18 5:29 ` [RESEND PATCH " Alison Schofield
2016-02-26 2:17 ` Martin K. Petersen
2016-02-26 2:17 ` Martin K. Petersen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.