Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Jingoo Han]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=euc-kr, Size: 2341 bytes --]

On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  drivers/video/backlight/Kconfig          |    7 ++
>  drivers/video/backlight/Makefile         |    1 +
>  drivers/video/backlight/gpio_backlight.c |  158 ++++++++++++++++++++++++++++++
>  include/video/gpio_backlight.h           |   21 ++++
>  4 files changed, 187 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/video/backlight/gpio_backlight.c
>  create mode 100644 include/video/gpio_backlight.h

[...]

> +static int __devinit gpio_backlight_probe(struct platform_device *pdev)
> +{
> +	struct gpio_backlight_platform_data *pdata = pdev->dev.platform_data;
> +	struct backlight_properties props;
> +	struct backlight_device *bl;
> +	struct gpio_backlight *gbl;
> +	int ret;
> +
> +	gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
> +	if (gbl == NULL)
> +		return -ENOMEM;
> +
> +	gbl->dev = &pdev->dev;
> +
> +	if (!pdata) {
> +		dev_err(&pdev->dev, "failed to find platform data\n");
> +		return -ENODEV;
> +	}
> +
> +	gbl->fbdev = pdata->fbdev;
> +	gbl->gpio = pdata->gpio;
> +	gbl->active = pdata->active_low ? 0 : 1;
> +
> +	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT,
> +				    pdata->name);

Please use GPIOF_INIT flags if you want to turn off GPIO backlight.
If gbl->active is inverted, GPIOF_INIT_HIGH can be used as below:

	ret = devm_gpio_request_one(gbl->dev, gbl->gpio,
				    GPIOF_DIR_OUT | (gbl->active ?
				    GPIOF_INIT_LOW : GPIOF_INIT_HIGH),
				    pdata->name);

Best regards,
Jingoo Han

> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "unable to request GPIO\n");
> +		return ret;
> +	}
> +
> +	memset(&props, 0, sizeof(props));
> +	props.type = BACKLIGHT_RAW;
> +	props.max_brightness = 1;
> +	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, gbl,
> +				       &gpio_backlight_ops, &props);
> +	if (IS_ERR(bl)) {
> +		dev_err(&pdev->dev, "failed to register backlight\n");
> +		return PTR_ERR(bl);
> +	}
> +
> +	bl->props.brightness = pdata->def_value;
> +	backlight_update_status(bl);
> +
> +	platform_set_drvdata(pdev, bl);
> +	return 0;
> +}


ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Jingoo Han]
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Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Laurent Pinchart]

Hi Jingoo,

On Tuesday 27 November 2012 01:10:36 Jingoo Han wrote:
> On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> 
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > 
> >  drivers/video/backlight/Kconfig          |    7 ++
> >  drivers/video/backlight/Makefile         |    1 +
> >  drivers/video/backlight/gpio_backlight.c |  158 +++++++++++++++++++++++++
> >  include/video/gpio_backlight.h           |   21 ++++
> >  4 files changed, 187 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/video/backlight/gpio_backlight.c
> >  create mode 100644 include/video/gpio_backlight.h
> 
> 
> [...]
> 
> 
> > +static int __devinit gpio_backlight_probe(struct platform_device *pdev)
> > +{
> > +	struct gpio_backlight_platform_data *pdata = pdev->dev.platform_data;
> > +	struct backlight_properties props;
> > +	struct backlight_device *bl;
> > +	struct gpio_backlight *gbl;
> > +	int ret;
> > +
> > +	gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
> > +	if (gbl = NULL)
> > +		return -ENOMEM;
> > +
> > +	gbl->dev = &pdev->dev;
> > +
> > +	if (!pdata) {
> > +		dev_err(&pdev->dev, "failed to find platform data\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	gbl->fbdev = pdata->fbdev;
> > +	gbl->gpio = pdata->gpio;
> > +	gbl->active = pdata->active_low ? 0 : 1;
> > +
> > +	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT,
> > +				    pdata->name);
> 
> 
> Please use GPIOF_INIT flags if you want to turn off GPIO backlight.
> If gbl->active is inverted, GPIOF_INIT_HIGH can be used as below:
> 
> 	ret = devm_gpio_request_one(gbl->dev, gbl->gpio,
> 				    GPIOF_DIR_OUT | (gbl->active ?
> 				    GPIOF_INIT_LOW : GPIOF_INIT_HIGH),
> 				    pdata->name);

Good point, thank you. I'll fix that.

> > +	if (ret < 0) {
> > +		dev_err(&pdev->dev, "unable to request GPIO\n");
> > +		return ret;
> > +	}
> > +
> > +	memset(&props, 0, sizeof(props));
> > +	props.type = BACKLIGHT_RAW;
> > +	props.max_brightness = 1;
> > +	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, gbl,
> > +				       &gpio_backlight_ops, &props);
> > +	if (IS_ERR(bl)) {
> > +		dev_err(&pdev->dev, "failed to register backlight\n");
> > +		return PTR_ERR(bl);
> > +	}
> > +
> > +	bl->props.brightness = pdata->def_value;
> > +	backlight_update_status(bl);
> > +
> > +	platform_set_drvdata(pdev, bl);
> > +	return 0;
> > +}

-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Laurent Pinchart]

Hi Jingoo,

On Tuesday 27 November 2012 01:10:36 Jingoo Han wrote:
> On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> 
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > 
> >  drivers/video/backlight/Kconfig          |    7 ++
> >  drivers/video/backlight/Makefile         |    1 +
> >  drivers/video/backlight/gpio_backlight.c |  158 +++++++++++++++++++++++++
> >  include/video/gpio_backlight.h           |   21 ++++
> >  4 files changed, 187 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/video/backlight/gpio_backlight.c
> >  create mode 100644 include/video/gpio_backlight.h
> 
> 
> [...]
> 
> 
> > +static int __devinit gpio_backlight_probe(struct platform_device *pdev)
> > +{
> > +	struct gpio_backlight_platform_data *pdata = pdev->dev.platform_data;
> > +	struct backlight_properties props;
> > +	struct backlight_device *bl;
> > +	struct gpio_backlight *gbl;
> > +	int ret;
> > +
> > +	gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
> > +	if (gbl == NULL)
> > +		return -ENOMEM;
> > +
> > +	gbl->dev = &pdev->dev;
> > +
> > +	if (!pdata) {
> > +		dev_err(&pdev->dev, "failed to find platform data\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	gbl->fbdev = pdata->fbdev;
> > +	gbl->gpio = pdata->gpio;
> > +	gbl->active = pdata->active_low ? 0 : 1;
> > +
> > +	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT,
> > +				    pdata->name);
> 
> 
> Please use GPIOF_INIT flags if you want to turn off GPIO backlight.
> If gbl->active is inverted, GPIOF_INIT_HIGH can be used as below:
> 
> 	ret = devm_gpio_request_one(gbl->dev, gbl->gpio,
> 				    GPIOF_DIR_OUT | (gbl->active ?
> 				    GPIOF_INIT_LOW : GPIOF_INIT_HIGH),
> 				    pdata->name);

Good point, thank you. I'll fix that.

> > +	if (ret < 0) {
> > +		dev_err(&pdev->dev, "unable to request GPIO\n");
> > +		return ret;
> > +	}
> > +
> > +	memset(&props, 0, sizeof(props));
> > +	props.type = BACKLIGHT_RAW;
> > +	props.max_brightness = 1;
> > +	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, gbl,
> > +				       &gpio_backlight_ops, &props);
> > +	if (IS_ERR(bl)) {
> > +		dev_err(&pdev->dev, "failed to register backlight\n");
> > +		return PTR_ERR(bl);
> > +	}
> > +
> > +	bl->props.brightness = pdata->def_value;
> > +	backlight_update_status(bl);
> > +
> > +	platform_set_drvdata(pdev, bl);
> > +	return 0;
> > +}

-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Jingoo Han]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=euc-kr, Size: 7471 bytes --]

On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

CC'ed Andrew Morton

It looks good. Also, I tested this patch with SMDK4210 board.
Acked-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han

> ---
>  drivers/video/backlight/Kconfig          |    7 ++
>  drivers/video/backlight/Makefile         |    1 +
>  drivers/video/backlight/gpio_backlight.c |  158 ++++++++++++++++++++++++++++++
>  include/video/gpio_backlight.h           |   21 ++++
>  4 files changed, 187 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/video/backlight/gpio_backlight.c
>  create mode 100644 include/video/gpio_backlight.h
> 
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 765a945..259442d 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -390,6 +390,13 @@ config BACKLIGHT_TPS65217
>  	  If you have a Texas Instruments TPS65217 say Y to enable the
>  	  backlight driver.
> 
> +config BACKLIGHT_GPIO
> +	tristate "Generic GPIO based Backlight Driver"
> +	depends on GENERIC_GPIO
> +	help
> +	  If you have a LCD backlight adjustable by GPIO, say Y to enable
> +	  this driver.
> +
>  endif # BACKLIGHT_CLASS_DEVICE
> 
>  endif # BACKLIGHT_LCD_SUPPORT
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index e7ce729..ec91c4a 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -45,3 +45,4 @@ obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
>  obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
>  obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o
>  obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
> +obj-$(CONFIG_BACKLIGHT_GPIO)	+= gpio_backlight.o
> diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
> new file mode 100644
> index 0000000..5a8cd34
> --- /dev/null
> +++ b/drivers/video/backlight/gpio_backlight.c
> @@ -0,0 +1,158 @@
> +/*
> + * gpio_backlight.c - Simple GPIO-controlled backlight
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/err.h>
> +#include <linux/fb.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <video/gpio_backlight.h>
> +
> +struct gpio_backlight {
> +	struct device *dev;
> +	struct device *fbdev;
> +
> +	int gpio;
> +	int active;
> +};
> +
> +static int gpio_backlight_update_status(struct backlight_device *bl)
> +{
> +	struct gpio_backlight *gbl = bl_get_data(bl);
> +	int brightness = bl->props.brightness;
> +
> +	if (bl->props.power != FB_BLANK_UNBLANK ||
> +	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
> +	    bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
> +		brightness = 0;
> +
> +	gpio_set_value(gbl->gpio, brightness ? gbl->active : !gbl->active);
> +
> +	return 0;
> +}
> +
> +static int gpio_backlight_get_brightness(struct backlight_device *bl)
> +{
> +	return bl->props.brightness;
> +}
> +
> +static int gpio_backlight_check_fb(struct backlight_device *bl,
> +				   struct fb_info *info)
> +{
> +	struct gpio_backlight *gbl = bl_get_data(bl);
> +
> +	return gbl->fbdev == info->dev;
> +}
> +
> +static const struct backlight_ops gpio_backlight_ops = {
> +	.update_status	= gpio_backlight_update_status,
> +	.get_brightness	= gpio_backlight_get_brightness,
> +	.check_fb	= gpio_backlight_check_fb,
> +};
> +
> +#ifdef CONFIG_PM
> +static int gpio_backlight_suspend(struct device *dev)
> +{
> +	struct backlight_device *bl = dev_get_drvdata(dev);
> +	struct gpio_backlight *gbl = bl_get_data(bl);
> +
> +	gpio_set_value(gbl->gpio, !gbl->active);
> +
> +	return 0;
> +}
> +
> +static int gpio_backlight_resume(struct device *dev)
> +{
> +	struct backlight_device *bl = dev_get_drvdata(dev);
> +
> +	backlight_update_status(bl);
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(gpio_backlight_pm_ops, gpio_backlight_suspend,
> +			 gpio_backlight_resume);
> +
> +#endif
> +
> +static int __devinit gpio_backlight_probe(struct platform_device *pdev)
> +{
> +	struct gpio_backlight_platform_data *pdata = pdev->dev.platform_data;
> +	struct backlight_properties props;
> +	struct backlight_device *bl;
> +	struct gpio_backlight *gbl;
> +	int ret;
> +
> +	gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
> +	if (gbl == NULL)
> +		return -ENOMEM;
> +
> +	gbl->dev = &pdev->dev;
> +
> +	if (!pdata) {
> +		dev_err(&pdev->dev, "failed to find platform data\n");
> +		return -ENODEV;
> +	}
> +
> +	gbl->fbdev = pdata->fbdev;
> +	gbl->gpio = pdata->gpio;
> +	gbl->active = pdata->active_low ? 0 : 1;
> +
> +	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT,
> +				    pdata->name);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "unable to request GPIO\n");
> +		return ret;
> +	}
> +
> +	memset(&props, 0, sizeof(props));
> +	props.type = BACKLIGHT_RAW;
> +	props.max_brightness = 1;
> +	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, gbl,
> +				       &gpio_backlight_ops, &props);
> +	if (IS_ERR(bl)) {
> +		dev_err(&pdev->dev, "failed to register backlight\n");
> +		return PTR_ERR(bl);
> +	}
> +
> +	bl->props.brightness = pdata->def_value;
> +	backlight_update_status(bl);
> +
> +	platform_set_drvdata(pdev, bl);
> +	return 0;
> +}
> +
> +static int __devexit gpio_backlight_remove(struct platform_device *pdev)
> +{
> +	struct backlight_device *bl = platform_get_drvdata(pdev);
> +
> +	backlight_device_unregister(bl);
> +	return 0;
> +}
> +
> +static struct platform_driver gpio_backlight_driver = {
> +	.driver		= {
> +		.name		= "gpio-backlight",
> +		.owner		= THIS_MODULE,
> +#ifdef CONFIG_PM
> +		.pm		= &gpio_backlight_pm_ops,
> +#endif
> +	},
> +	.probe		= gpio_backlight_probe,
> +	.remove		= __devexit_p(gpio_backlight_remove),
> +};
> +
> +module_platform_driver(gpio_backlight_driver);
> +
> +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
> +MODULE_DESCRIPTION("GPIO-based Backlight Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:gpio-backlight");
> diff --git a/include/video/gpio_backlight.h b/include/video/gpio_backlight.h
> new file mode 100644
> index 0000000..5ae0d9c
> --- /dev/null
> +++ b/include/video/gpio_backlight.h
> @@ -0,0 +1,21 @@
> +/*
> + * gpio_backlight.h - Simple GPIO-controlled backlight
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __GPIO_BACKLIGHT_H__
> +#define __GPIO_BACKLIGHT_H__
> +
> +struct device;
> +
> +struct gpio_backlight_platform_data {
> +	struct device *fbdev;
> +	int gpio;
> +	int def_value;
> +	bool active_low;
> +	const char *name;
> +};
> +
> +#endif
> --
> 1.7.8.6
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Jingoo Han]
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Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Laurent Pinchart]

Hi Jingoo,

On Monday 26 November 2012 09:49:36 Jingoo Han wrote:
> On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> CC'ed Andrew Morton
> 
> It looks good. Also, I tested this patch with SMDK4210 board.
> Acked-by: Jingoo Han <jg1.han@samsung.com>

Thank you.

Unless Richard wants to take 1/5 and 2/5, I plan to push them through either 
the Renesas ARM or Renesas SH tree with the board code patches.

-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Laurent Pinchart]

Hi Jingoo,

On Monday 26 November 2012 09:49:36 Jingoo Han wrote:
> On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> CC'ed Andrew Morton
> 
> It looks good. Also, I tested this patch with SMDK4210 board.
> Acked-by: Jingoo Han <jg1.han@samsung.com>

Thank you.

Unless Richard wants to take 1/5 and 2/5, I plan to push them through either 
the Renesas ARM or Renesas SH tree with the board code patches.

-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Lars-Peter Clausen]

On 11/26/2012 10:49 AM, Jingoo Han wrote:
> On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
[...]
>> +static int gpio_backlight_check_fb(struct backlight_device *bl,
>> +				   struct fb_info *info)
>> +{
>> +	struct gpio_backlight *gbl = bl_get_data(bl);
>> +
>> +	return gbl->fbdev = info->dev;

I think it makes sense to return true if fbdev is NULL, to provide a simple
fallback for systems with only one framebuffer device.

>> +}
>> +
[...]
>> +#ifdef CONFIG_PM
>> +static int gpio_backlight_suspend(struct device *dev)
>> +{
>> +	struct backlight_device *bl = dev_get_drvdata(dev);
>> +	struct gpio_backlight *gbl = bl_get_data(bl);
>> +
>> +	gpio_set_value(gbl->gpio, !gbl->active);
>> +
>> +	return 0;
>> +}
>> +
>> +static int gpio_backlight_resume(struct device *dev)
>> +{
>> +	struct backlight_device *bl = dev_get_drvdata(dev);
>> +
>> +	backlight_update_status(bl);
>> +	return 0;
>> +}

If you use BL_CORE_SUSPENDRESUME you can get rid of the custom
suspend/resume handlers.

>> +
>> +static SIMPLE_DEV_PM_OPS(gpio_backlight_pm_ops, gpio_backlight_suspend,
>> +			 gpio_backlight_resume);
>> +
>> +#endif
>> +
[...]

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Lars-Peter Clausen]

On 11/26/2012 10:49 AM, Jingoo Han wrote:
> On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
[...]
>> +static int gpio_backlight_check_fb(struct backlight_device *bl,
>> +				   struct fb_info *info)
>> +{
>> +	struct gpio_backlight *gbl = bl_get_data(bl);
>> +
>> +	return gbl->fbdev == info->dev;

I think it makes sense to return true if fbdev is NULL, to provide a simple
fallback for systems with only one framebuffer device.

>> +}
>> +
[...]
>> +#ifdef CONFIG_PM
>> +static int gpio_backlight_suspend(struct device *dev)
>> +{
>> +	struct backlight_device *bl = dev_get_drvdata(dev);
>> +	struct gpio_backlight *gbl = bl_get_data(bl);
>> +
>> +	gpio_set_value(gbl->gpio, !gbl->active);
>> +
>> +	return 0;
>> +}
>> +
>> +static int gpio_backlight_resume(struct device *dev)
>> +{
>> +	struct backlight_device *bl = dev_get_drvdata(dev);
>> +
>> +	backlight_update_status(bl);
>> +	return 0;
>> +}

If you use BL_CORE_SUSPENDRESUME you can get rid of the custom
suspend/resume handlers.

>> +
>> +static SIMPLE_DEV_PM_OPS(gpio_backlight_pm_ops, gpio_backlight_suspend,
>> +			 gpio_backlight_resume);
>> +
>> +#endif
>> +
[...]

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Laurent Pinchart]

Hi Lars-Peter,

On Monday 26 November 2012 11:44:04 Lars-Peter Clausen wrote:
> On 11/26/2012 10:49 AM, Jingoo Han wrote:
> > On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> 
> [...]
> 
> >> +static int gpio_backlight_check_fb(struct backlight_device *bl,
> >> +				   struct fb_info *info)
> >> +{
> >> +	struct gpio_backlight *gbl = bl_get_data(bl);
> >> +
> >> +	return gbl->fbdev = info->dev;
> 
> I think it makes sense to return true if fbdev is NULL, to provide a simple
> fallback for systems with only one framebuffer device.

Agreed, I'll change that.

> >> +}
> >> +
> 
> [...]
> 
> >> +#ifdef CONFIG_PM
> >> +static int gpio_backlight_suspend(struct device *dev)
> >> +{
> >> +	struct backlight_device *bl = dev_get_drvdata(dev);
> >> +	struct gpio_backlight *gbl = bl_get_data(bl);
> >> +
> >> +	gpio_set_value(gbl->gpio, !gbl->active);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int gpio_backlight_resume(struct device *dev)
> >> +{
> >> +	struct backlight_device *bl = dev_get_drvdata(dev);
> >> +
> >> +	backlight_update_status(bl);
> >> +	return 0;
> >> +}
> 
> If you use BL_CORE_SUSPENDRESUME you can get rid of the custom
> suspend/resume handlers.

Good point, I'll do that.

> >> +
> >> +static SIMPLE_DEV_PM_OPS(gpio_backlight_pm_ops, gpio_backlight_suspend,
> >> +			 gpio_backlight_resume);
> >> +
> >> +#endif
> >> +

-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Laurent Pinchart]

Hi Lars-Peter,

On Monday 26 November 2012 11:44:04 Lars-Peter Clausen wrote:
> On 11/26/2012 10:49 AM, Jingoo Han wrote:
> > On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> 
> [...]
> 
> >> +static int gpio_backlight_check_fb(struct backlight_device *bl,
> >> +				   struct fb_info *info)
> >> +{
> >> +	struct gpio_backlight *gbl = bl_get_data(bl);
> >> +
> >> +	return gbl->fbdev == info->dev;
> 
> I think it makes sense to return true if fbdev is NULL, to provide a simple
> fallback for systems with only one framebuffer device.

Agreed, I'll change that.

> >> +}
> >> +
> 
> [...]
> 
> >> +#ifdef CONFIG_PM
> >> +static int gpio_backlight_suspend(struct device *dev)
> >> +{
> >> +	struct backlight_device *bl = dev_get_drvdata(dev);
> >> +	struct gpio_backlight *gbl = bl_get_data(bl);
> >> +
> >> +	gpio_set_value(gbl->gpio, !gbl->active);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int gpio_backlight_resume(struct device *dev)
> >> +{
> >> +	struct backlight_device *bl = dev_get_drvdata(dev);
> >> +
> >> +	backlight_update_status(bl);
> >> +	return 0;
> >> +}
> 
> If you use BL_CORE_SUSPENDRESUME you can get rid of the custom
> suspend/resume handlers.

Good point, I'll do that.

> >> +
> >> +static SIMPLE_DEV_PM_OPS(gpio_backlight_pm_ops, gpio_backlight_suspend,
> >> +			 gpio_backlight_resume);
> >> +
> >> +#endif
> >> +

-- 
Regards,

Laurent Pinchart

[PATCH 1/5] backlight: Add GPIO-based backlight driver

[Laurent Pinchart]

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/backlight/Kconfig          |    7 ++
 drivers/video/backlight/Makefile         |    1 +
 drivers/video/backlight/gpio_backlight.c |  158 ++++++++++++++++++++++++++++++
 include/video/gpio_backlight.h           |   21 ++++
 4 files changed, 187 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/backlight/gpio_backlight.c
 create mode 100644 include/video/gpio_backlight.h

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 765a945..259442d 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -390,6 +390,13 @@ config BACKLIGHT_TPS65217
 	  If you have a Texas Instruments TPS65217 say Y to enable the
 	  backlight driver.
 
+config BACKLIGHT_GPIO
+	tristate "Generic GPIO based Backlight Driver"
+	depends on GENERIC_GPIO
+	help
+	  If you have a LCD backlight adjustable by GPIO, say Y to enable
+	  this driver.
+
 endif # BACKLIGHT_CLASS_DEVICE
 
 endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index e7ce729..ec91c4a 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
 obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
 obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o
 obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
+obj-$(CONFIG_BACKLIGHT_GPIO)	+= gpio_backlight.o
diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
new file mode 100644
index 0000000..5a8cd34
--- /dev/null
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -0,0 +1,158 @@
+/*
+ * gpio_backlight.c - Simple GPIO-controlled backlight
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <video/gpio_backlight.h>
+
+struct gpio_backlight {
+	struct device *dev;
+	struct device *fbdev;
+
+	int gpio;
+	int active;
+};
+
+static int gpio_backlight_update_status(struct backlight_device *bl)
+{
+	struct gpio_backlight *gbl = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
+	    bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
+		brightness = 0;
+
+	gpio_set_value(gbl->gpio, brightness ? gbl->active : !gbl->active);
+
+	return 0;
+}
+
+static int gpio_backlight_get_brightness(struct backlight_device *bl)
+{
+	return bl->props.brightness;
+}
+
+static int gpio_backlight_check_fb(struct backlight_device *bl,
+				   struct fb_info *info)
+{
+	struct gpio_backlight *gbl = bl_get_data(bl);
+
+	return gbl->fbdev = info->dev;
+}
+
+static const struct backlight_ops gpio_backlight_ops = {
+	.update_status	= gpio_backlight_update_status,
+	.get_brightness	= gpio_backlight_get_brightness,
+	.check_fb	= gpio_backlight_check_fb,
+};
+
+#ifdef CONFIG_PM
+static int gpio_backlight_suspend(struct device *dev)
+{
+	struct backlight_device *bl = dev_get_drvdata(dev);
+	struct gpio_backlight *gbl = bl_get_data(bl);
+
+	gpio_set_value(gbl->gpio, !gbl->active);
+
+	return 0;
+}
+
+static int gpio_backlight_resume(struct device *dev)
+{
+	struct backlight_device *bl = dev_get_drvdata(dev);
+
+	backlight_update_status(bl);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(gpio_backlight_pm_ops, gpio_backlight_suspend,
+			 gpio_backlight_resume);
+
+#endif
+
+static int __devinit gpio_backlight_probe(struct platform_device *pdev)
+{
+	struct gpio_backlight_platform_data *pdata = pdev->dev.platform_data;
+	struct backlight_properties props;
+	struct backlight_device *bl;
+	struct gpio_backlight *gbl;
+	int ret;
+
+	gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
+	if (gbl = NULL)
+		return -ENOMEM;
+
+	gbl->dev = &pdev->dev;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "failed to find platform data\n");
+		return -ENODEV;
+	}
+
+	gbl->fbdev = pdata->fbdev;
+	gbl->gpio = pdata->gpio;
+	gbl->active = pdata->active_low ? 0 : 1;
+
+	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT,
+				    pdata->name);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to request GPIO\n");
+		return ret;
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 1;
+	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, gbl,
+				       &gpio_backlight_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		return PTR_ERR(bl);
+	}
+
+	bl->props.brightness = pdata->def_value;
+	backlight_update_status(bl);
+
+	platform_set_drvdata(pdev, bl);
+	return 0;
+}
+
+static int __devexit gpio_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+
+	backlight_device_unregister(bl);
+	return 0;
+}
+
+static struct platform_driver gpio_backlight_driver = {
+	.driver		= {
+		.name		= "gpio-backlight",
+		.owner		= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm		= &gpio_backlight_pm_ops,
+#endif
+	},
+	.probe		= gpio_backlight_probe,
+	.remove		= __devexit_p(gpio_backlight_remove),
+};
+
+module_platform_driver(gpio_backlight_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("GPIO-based Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-backlight");
diff --git a/include/video/gpio_backlight.h b/include/video/gpio_backlight.h
new file mode 100644
index 0000000..5ae0d9c
--- /dev/null
+++ b/include/video/gpio_backlight.h
@@ -0,0 +1,21 @@
+/*
+ * gpio_backlight.h - Simple GPIO-controlled backlight
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __GPIO_BACKLIGHT_H__
+#define __GPIO_BACKLIGHT_H__
+
+struct device;
+
+struct gpio_backlight_platform_data {
+	struct device *fbdev;
+	int gpio;
+	int def_value;
+	bool active_low;
+	const char *name;
+};
+
+#endif
-- 
1.7.8.6

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Jingoo Han]
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Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Jingoo Han]

T24gTW9uZGF5LCBOb3ZlbWJlciAyNiwgMjAxMiA3OjI1IFBNLCBMYXVyZW50IFBpbmNoYXJ0IHdy
b3RlDQo+IA0KPiBIaSBKaW5nb28sDQo+IA0KPiBPbiBNb25kYXkgMjYgTm92ZW1iZXIgMjAxMiAw
OTo0OTozNiBKaW5nb28gSGFuIHdyb3RlOg0KPiA+IE9uIFNhdHVyZGF5LCBOb3ZlbWJlciAyNCwg
MjAxMiAxOjM1IEFNLCBMYXVyZW50IFBpbmNoYXJ0IHdyb3RlDQo+ID4gPg0KPiA+ID4gU2lnbmVk
LW9mZi1ieTogTGF1cmVudCBQaW5jaGFydCA8bGF1cmVudC5waW5jaGFydEBpZGVhc29uYm9hcmQu
Y29tPg0KPiA+DQo+ID4gQ0MnZWQgQW5kcmV3IE1vcnRvbg0KPiA+DQo+ID4gSXQgbG9va3MgZ29v
ZC4gQWxzbywgSSB0ZXN0ZWQgdGhpcyBwYXRjaCB3aXRoIFNNREs0MjEwIGJvYXJkLg0KPiA+IEFj
a2VkLWJ5OiBKaW5nb28gSGFuIDxqZzEuaGFuQHNhbXN1bmcuY29tPg0KPiANCj4gVGhhbmsgeW91
Lg0KPiANCj4gVW5sZXNzIFJpY2hhcmQgd2FudHMgdG8gdGFrZSAxLzUgYW5kIDIvNSwgSSBwbGFu
IHRvIHB1c2ggdGhlbSB0aHJvdWdoIGVpdGhlcg0KPiB0aGUgUmVuZXNhcyBBUk0gb3IgUmVuZXNh
cyBTSCB0cmVlIHdpdGggdGhlIGJvYXJkIGNvZGUgcGF0Y2hlcy4NCg0KSGkgTGF1cmVudCwNCg0K
T0ssIEkgc2VlLg0KTWF5YmUgUmljaGFyZCB3b24ndCB0YWtlIDEvNSBhbmQgMi81LiBBcyB5b3Ug
bWVudGlvbmVkLCBpdCB3b3VsZCBiZSBnb29kDQp0byBwdXNoIHRoZW0gdGhyb3VnaG91dCB0aGUg
UmVuZXNhcyB0cmVlIHRvIGF2b2lkIGJpc2VjdGlvbiBicmVha2FnZXMuDQoNCkJlc3QgcmVnYXJk
cywNCkppbmdvbyBIYW4NCg0KDQo

Re: [PATCH 1/5] backlight: Add GPIO-based backlight driver

[Jingoo Han]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=euc-kr, Size: 949 bytes --]

On Monday, November 26, 2012 7:25 PM, Laurent Pinchart wrote
> 
> Hi Jingoo,
> 
> On Monday 26 November 2012 09:49:36 Jingoo Han wrote:
> > On Saturday, November 24, 2012 1:35 AM, Laurent Pinchart wrote
> > >
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >
> > CC'ed Andrew Morton
> >
> > It looks good. Also, I tested this patch with SMDK4210 board.
> > Acked-by: Jingoo Han <jg1.han@samsung.com>
> 
> Thank you.
> 
> Unless Richard wants to take 1/5 and 2/5, I plan to push them through either
> the Renesas ARM or Renesas SH tree with the board code patches.

Hi Laurent,

OK, I see.
Maybe Richard won't take 1/5 and 2/5. As you mentioned, it would be good
to push them throughout the Renesas tree to avoid bisection breakages.

Best regards,
Jingoo Han


ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥