New motherboard to port OpenBMC to

New motherboard to port OpenBMC to

[Konstantin Klubnichkin]

Hi all! 

I have the custom-made motherboards for Grantley CPU with Avocent-based BMC, and my goal is to switch to OpenBMC. 

I've read HOWTOs in the OpenBMC documentation, but usually the documentation is usually a bit behind the development, so are there any newer howtos or guides?

Now I took Quanta MB as a reference and going to at least boot up the system and get the network. But it's pretty unclear for me how to add sensors, how to get CPUs temperatures, etc

Could you please advise what to read to get into details?

Thanks!
-- 
Best regards,
Konstantin Klubnichkin,
lead firmware engineer,
server hardware R&D group,
Yandex Moscow office.
tel: +7-903-510-33-33

Re: New motherboard to port OpenBMC to

[Vijay Khemka]

Hi Konstantin,
I am working on howto for sensors, temp etc. I will post it here in couple of days.

Regards
-Vijay

On 1/23/19, 8:02 AM, "openbmc on behalf of Konstantin Klubnichkin" <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org on behalf of kitsok@yandex-team.ru> wrote:

    Hi all! 
    
    I have the custom-made motherboards for Grantley CPU with Avocent-based BMC, and my goal is to switch to OpenBMC. 
    
    I've read HOWTOs in the OpenBMC documentation, but usually the documentation is usually a bit behind the development, so are there any newer howtos or guides?
    
    Now I took Quanta MB as a reference and going to at least boot up the system and get the network. But it's pretty unclear for me how to add sensors, how to get CPUs temperatures, etc
    
    Could you please advise what to read to get into details?
    
    Thanks!
    -- 
    Best regards,
    Konstantin Klubnichkin,
    lead firmware engineer,
    server hardware R&D group,
    Yandex Moscow office.
    tel: +7-903-510-33-33
    
    

Re: New motherboard to port OpenBMC to

[Lei YU]

I have some how-tos on
https://github.com/mine260309/openbmc-intro/blob/master/Porting_Guide.md
That is based on an old OpenBMC release, but most of the content is still valid.

On Thu, Jan 24, 2019 at 1:58 AM Vijay Khemka <vijaykhemka@fb.com> wrote:
>
> Hi Konstantin,
> I am working on howto for sensors, temp etc. I will post it here in couple of days.
>
> Regards
> -Vijay
>
> On 1/23/19, 8:02 AM, "openbmc on behalf of Konstantin Klubnichkin" <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org on behalf of kitsok@yandex-team.ru> wrote:
>
>     Hi all!
>
>     I have the custom-made motherboards for Grantley CPU with Avocent-based BMC, and my goal is to switch to OpenBMC.
>
>     I've read HOWTOs in the OpenBMC documentation, but usually the documentation is usually a bit behind the development, so are there any newer howtos or guides?
>
>     Now I took Quanta MB as a reference and going to at least boot up the system and get the network. But it's pretty unclear for me how to add sensors, how to get CPUs temperatures, etc
>
>     Could you please advise what to read to get into details?
>
>     Thanks!
>     --
>     Best regards,
>     Konstantin Klubnichkin,
>     lead firmware engineer,
>     server hardware R&D group,
>     Yandex Moscow office.
>     tel: +7-903-510-33-33
>
>
>

Re: [EXT] Re: New motherboard to port OpenBMC to

[Aaron Williams]

I look forward to seeing this since that's what I'm currently trying to figure 
out with our own board.

-Aaron

On Wednesday, January 23, 2019 9:56:43 AM PST Vijay Khemka wrote:
> External Email
> 
> ----------------------------------------------------------------------
> Hi Konstantin,
> I am working on howto for sensors, temp etc. I will post it here in couple
> of days.
 
> Regards
> -Vijay
> 
> On 1/23/19, 8:02 AM, "openbmc on behalf of Konstantin Klubnichkin"
> <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org on behalf of
> kitsok@yandex-team.ru> wrote:
 
>     Hi all! 
>     
>     I have the custom-made motherboards for Grantley CPU with Avocent-based
> BMC, and my goal is to switch to OpenBMC. 
 
>     I've read HOWTOs in the OpenBMC documentation, but usually the
> documentation is usually a bit behind the development, so are there any
> newer howtos or guides?
 
>     Now I took Quanta MB as a reference and going to at least boot up the
> system and get the network. But it's pretty unclear for me how to add
> sensors, how to get CPUs temperatures, etc
 
>     Could you please advise what to read to get into details?
>     
>     Thanks!
>     -- 
>     Best regards,
>     Konstantin Klubnichkin,
>     lead firmware engineer,
>     server hardware R&D group,
>     Yandex Moscow office.
>     tel: +7-903-510-33-33
>     
>     
>