Re: [PATCH] usb: dwc2: host: Fix remote wakeup when not in DWC2_L2

[Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>]

Am Donnerstag, 22. Oktober 2015, 13:05:03 schrieb Douglas Anderson:
> In commit 734643dfbdde ("usb: dwc2: host: add flag to reflect bus
> state") we changed dwc2_port_suspend() not to set the lx_state
> anymore (instead it sets the new bus_suspended variable).  This
> introduced a bug where we would fail to detect device insertions if:
> 
> 1. Plug empty hub into dwc2
> 2. Plug USB flash drive into the empty hub.
> 3. Wait a few seconds
> 4. Unplug USB flash drive
> 5. Less than 2 seconds after step 4, plug the USB flash drive in again.
> 
> The dwc2_hcd_rem_wakeup() function should have been changed to look at
> the new bus_suspended variable.
> 
> Let's fix it.  Since commit b46146d59fda ("usb: dwc2: host: resume root
> hub on remote wakeup") talks about needing the root hub resumed if the
> bus was suspended, we'll include it in our test.
> 
> It appears that the "port_l1_change" should only be set to 1 if we were
> in DWC2_L1 (the driver currently never sets this), so we'll update the
> former "else" case based on this test.
> 
> Fixes: 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state")
> Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

I've talked with Doug a lot about that problem today and from reading
this change and the referenced causing change, it looks correct
and good to me, so

Reviewed-by: Heiko Stuebner <heiko@sntech..de>