From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
linux-arm-kernel@lists.infradead.org
Cc: linux-crypto@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Martin Kaiser <martin@kaiser.cx>,
Martin Kaiser <martin@kaiser.cx>
Subject: Re: [PATCH 1/3] hwrng: imx-rngc - use polling to detect end of self test
Date: Wed, 23 Aug 2023 07:23:32 +0200 [thread overview]
Message-ID: <3503619.mvXUDI8C0e@steina-w> (raw)
In-Reply-To: <20230822152553.190858-2-martin@kaiser.cx>
Am Dienstag, 22. August 2023, 17:25:51 CEST schrieb Martin Kaiser:
> Use polling to detect the end of the rngc self test. This is much simpler
> than using an interrupt and a completion.
>
> Active waiting is no disadvantage here. The self test is run during
> probe, there's nothing we could do in parallel at this time.
If this driver is built-in you are stalling the boot process while polling,
no? Unless probe_type = PROBE_PREFER_ASYNCHRONOUS is set of course.
Best regards,
Alexander
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> drivers/char/hw_random/imx-rngc.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/char/hw_random/imx-rngc.c
> b/drivers/char/hw_random/imx-rngc.c index e4b385b01b11..85207535fd12 100644
> --- a/drivers/char/hw_random/imx-rngc.c
> +++ b/drivers/char/hw_random/imx-rngc.c
> @@ -17,6 +17,7 @@
> #include <linux/hw_random.h>
> #include <linux/completion.h>
> #include <linux/io.h>
> +#include <linux/iopoll.h>
> #include <linux/bitfield.h>
>
> #define RNGC_VER_ID 0x0000
> @@ -101,21 +102,19 @@ static inline void imx_rngc_irq_unmask(struct imx_rngc
> *rngc)
>
> static int imx_rngc_self_test(struct imx_rngc *rngc)
> {
> - u32 cmd;
> + u32 cmd, status;
> int ret;
>
> - imx_rngc_irq_unmask(rngc);
> -
> /* run self test */
> cmd = readl(rngc->base + RNGC_COMMAND);
> writel(cmd | RNGC_CMD_SELF_TEST, rngc->base + RNGC_COMMAND);
>
> - ret = wait_for_completion_timeout(&rngc->rng_op_done,
> msecs_to_jiffies(RNGC_TIMEOUT)); - imx_rngc_irq_mask_clear(rngc);
> - if (!ret)
> - return -ETIMEDOUT;
> + ret = readl_poll_timeout(rngc->base + RNGC_STATUS, status,
> + status & RNGC_STATUS_ST_DONE, 1000,
RNGC_TIMEOUT * 1000);
> + if (ret < 0)
> + return ret;
>
> - return rngc->err_reg ? -EIO : 0;
> + return readl(rngc->base + RNGC_ERROR) ? -EIO : 0;
> }
>
> static int imx_rngc_read(struct hwrng *rng, void *data, size_t max, bool
> wait)
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
linux-arm-kernel@lists.infradead.org
Cc: linux-crypto@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Martin Kaiser <martin@kaiser.cx>,
Martin Kaiser <martin@kaiser.cx>
Subject: Re: [PATCH 1/3] hwrng: imx-rngc - use polling to detect end of self test
Date: Wed, 23 Aug 2023 07:23:32 +0200 [thread overview]
Message-ID: <3503619.mvXUDI8C0e@steina-w> (raw)
In-Reply-To: <20230822152553.190858-2-martin@kaiser.cx>
Am Dienstag, 22. August 2023, 17:25:51 CEST schrieb Martin Kaiser:
> Use polling to detect the end of the rngc self test. This is much simpler
> than using an interrupt and a completion.
>
> Active waiting is no disadvantage here. The self test is run during
> probe, there's nothing we could do in parallel at this time.
If this driver is built-in you are stalling the boot process while polling,
no? Unless probe_type = PROBE_PREFER_ASYNCHRONOUS is set of course.
Best regards,
Alexander
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> drivers/char/hw_random/imx-rngc.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/char/hw_random/imx-rngc.c
> b/drivers/char/hw_random/imx-rngc.c index e4b385b01b11..85207535fd12 100644
> --- a/drivers/char/hw_random/imx-rngc.c
> +++ b/drivers/char/hw_random/imx-rngc.c
> @@ -17,6 +17,7 @@
> #include <linux/hw_random.h>
> #include <linux/completion.h>
> #include <linux/io.h>
> +#include <linux/iopoll.h>
> #include <linux/bitfield.h>
>
> #define RNGC_VER_ID 0x0000
> @@ -101,21 +102,19 @@ static inline void imx_rngc_irq_unmask(struct imx_rngc
> *rngc)
>
> static int imx_rngc_self_test(struct imx_rngc *rngc)
> {
> - u32 cmd;
> + u32 cmd, status;
> int ret;
>
> - imx_rngc_irq_unmask(rngc);
> -
> /* run self test */
> cmd = readl(rngc->base + RNGC_COMMAND);
> writel(cmd | RNGC_CMD_SELF_TEST, rngc->base + RNGC_COMMAND);
>
> - ret = wait_for_completion_timeout(&rngc->rng_op_done,
> msecs_to_jiffies(RNGC_TIMEOUT)); - imx_rngc_irq_mask_clear(rngc);
> - if (!ret)
> - return -ETIMEDOUT;
> + ret = readl_poll_timeout(rngc->base + RNGC_STATUS, status,
> + status & RNGC_STATUS_ST_DONE, 1000,
RNGC_TIMEOUT * 1000);
> + if (ret < 0)
> + return ret;
>
> - return rngc->err_reg ? -EIO : 0;
> + return readl(rngc->base + RNGC_ERROR) ? -EIO : 0;
> }
>
> static int imx_rngc_read(struct hwrng *rng, void *data, size_t max, bool
> wait)
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-23 5:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-22 15:25 [PATCH 0/3] hwrng: imx-rngc - use polling instead of interrupt Martin Kaiser
2023-08-22 15:25 ` Martin Kaiser
2023-08-22 15:25 ` [PATCH 1/3] hwrng: imx-rngc - use polling to detect end of self test Martin Kaiser
2023-08-22 15:25 ` Martin Kaiser
2023-08-23 5:23 ` Alexander Stein [this message]
2023-08-23 5:23 ` Alexander Stein
2023-08-23 11:07 ` Martin Kaiser
2023-08-23 11:07 ` Martin Kaiser
2023-08-22 15:25 ` [PATCH 2/3] hwrng: imx-rngc - read status register for error checks Martin Kaiser
2023-08-22 15:25 ` Martin Kaiser
2023-08-22 15:25 ` [PATCH 3/3] hwrng: imx-rngc - use polling to wait for end of seeding Martin Kaiser
2023-08-22 15:25 ` Martin Kaiser
2023-08-23 5:33 ` Alexander Stein
2023-08-23 5:33 ` Alexander Stein
2023-08-23 11:16 ` Martin Kaiser
2023-08-23 11:16 ` Martin Kaiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3503619.mvXUDI8C0e@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin@kaiser.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.