[lm-sensors] R: Re: R: Re: sensors not found INTEL i7

* [lm-sensors] R: Re:  R: Re: sensors not found INTEL i7
@ 2010-03-15 14:00 didy45
  0 siblings, 0 replies; 3+ messages in thread
From: didy45 @ 2010-03-15 14:00 UTC (permalink / raw)
  To: lm-sensors

My ubuntu is:
Ubuntu 9.10 - Karmic Koala

My kernel version is:
2.6.31-20-generic


>----Messaggio originale----
>Da: anothersname@googlemail.com
>Data: 15/03/2010 12.26
>A: "didy45@libero.it"<didy45@libero.it>
>Ogg: Re: [lm-sensors] R: Re: sensors not found INTEL i7
>
>On 15 March 2010 10:29, didy45@libero.it <didy45@libero.it> wrote:
>> This is the answer to sensor -s and sensors-detect:
>>
>> fabio@fabio-laptop:~$ sensors -s
>> No sensors found!
>> Make sure you loaded all the kernel drivers you need.
>> Try sensors-detect to find out which these are.
>>
>> fabio@fabio-laptop:~$ sudo sensors-detect
>> [sudo] password for fabio:
>> # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
>> # System: Hewlett-Packard HP Pavilion dv6 Notebook PC (laptop)
>> # Board: Hewlett-Packard 3659
>>
>> This program will help you determine which kernel modules you need
>> to load to use lm_sensors most effectively. It is generally safe
>> and recommended to accept the default answers to all questions,
>> unless you know what you're doing.
>>
>> Some south bridges, CPUs or memory controllers contain embedded sensors.
>> Do you want to scan for them? This is totally safe. (YES/no): YES
>> Silicon Integrated Systems SIS5595...                       No
>> VIA VT82C686 Integrated Sensors...                          No
>> VIA VT8231 Integrated Sensors...                            No
>> AMD K8 thermal sensors...                                   No
>> AMD Family 10h thermal sensors...                           No
>> AMD Family 11h thermal sensors...                           No
>> Intel Core family thermal sensor...                         No
>> Intel Atom thermal sensor...                                No
>> Intel AMB FB-DIMM thermal sensor...                         No
>> VIA C7 thermal sensor...                                    No
>> VIA Nano thermal sensor...                                  No
>>
>> Some Super I/O chips contain embedded sensors. We have to write to
>> standard I/O ports to probe them. This is usually safe.
>> Do you want to scan for Super I/O sensors? (YES/no): YES
>> Probing for Super-I/O at 0x2e/0x2f
>> Trying family `National Semiconductor'...                   No
>> Trying family `SMSC'...                                     No
>> Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
>> Trying family `ITE'...                                      No
>> Probing for Super-I/O at 0x4e/0x4f
>> Trying family `National Semiconductor'...                   No
>> Trying family `SMSC'...                                     No
>> Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
>> Trying family `ITE'...                                      No
>>
>> Some hardware monitoring chips are accessible through the ISA I/O ports.
>> We have to write to arbitrary I/O ports to probe them. This is usually
>> safe though. Yes, you do have ISA I/O ports even if you do not have any
>> ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
>> Probing for `National Semiconductor LM78' at 0x290...       No
>> Probing for `National Semiconductor LM79' at 0x290...       No
>> Probing for `Winbond W83781D' at 0x290...                   No
>> Probing for `Winbond W83782D' at 0x290...                   No
>>
>> Lastly, we can probe the I2C/SMBus adapters for connected hardware
>> monitoring devices. This is the most risky part, and while it works
>> reasonably well on most systems, it has been reported to cause trouble
>> on some systems.
>> Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
>> Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3.
>> Sorry, no supported PCI bus adapters found.
>> WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be
>> ignored in a future release.
>> WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be
>> ignored in a future release.
>> Module i2c-dev loaded successfully.
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-0)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-1)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-2)
>> Do you want to scan it? (YES/no/selectively): YES
>> Client found at address 0x50
>> Probing for `Analog Devices ADM1033'...                     No
>> Probing for `Analog Devices ADM1034'...                     No
>> Probing for `SPD EEPROM'...                                 No
>> Probing for `EDID EEPROM'...                                Yes
>>    (confidence 8, not a hardware monitoring chip)
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-3)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-4)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-5)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-6)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-7)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Sorry, no sensors were detected.
>> This is relatively common on laptops, where thermal management is
>> handled by ACPI rather than the OS.
>>
>> What do i do?
>> Help me, please!
>>
>>
>>>----Messaggio originale----
>>>Da: anothersname@googlemail.com
>>>Data: 15/03/2010 3.36
>>>A: "didy45@libero.it"<didy45@libero.it>
>>>Ogg: Re: [lm-sensors] sensors not found INTEL i7
>>>
>>>On 14 March 2010 16:09, didy45@libero.it <didy45@libero.it> wrote:
>>>> Do not function lm-sensors on hp pavillon dv6 2153el
>>>> with cpu intel i7.
>>>> After i install lmsensors and i start the sensors.
>>>> the answer is
>>>> no sensors found!
>>>> What do i do?
>>>> Can you help me?
>>>> thanks!
>>>>
>>>> _______________________________________________
>>>> lm-sensors mailing list
>>>> lm-sensors@lm-sensors.org
>>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>>>
>>>
>>>Did you run sensors-detect?
>>>
>>>What did it report?
>>>
>>
>>
>>
>> _______________________________________________
>> lm-sensors mailing list
>> lm-sensors@lm-sensors.org
>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>
>
>Which version of the Kernel are you using?
>
>Which flavour of Linux?
>


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

^ permalink raw reply	[flat|nested] 3+ messages in thread