From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 2/4] media: imx: imx7-media-csi: Remove interlave fields
Date: Wed, 19 Apr 2023 09:02:44 +0200 [thread overview]
Message-ID: <3637672.ElGaqSPkdT@steina-w> (raw)
In-Reply-To: <20230418154351.GH30837@pendragon.ideasonboard.com>
Hi Laurent,
Am Dienstag, 18. April 2023, 17:43:51 CEST schrieb Laurent Pinchart:
> Hi Alexander,
>
> Thank you for the patch.
>
> In the subject line, "interlave" is misspelled. I'd write "Remove
> incorrect interlacing support"
Sounds much better, thanks. I'll change that.
> On Tue, Apr 18, 2023 at 02:20:39PM +0200, Alexander Stein wrote:
> > Interlaced mode is currently not supported, so disable fields in try_fmt.
>
> And here,
>
> The driver doesn't currently support interlacing, but due to legacy
> leftovers, it accepts values for the pixel format "field" field other
> than V4L2_FIELD_NONE. Fix it by hardcoding V4L2_FIELD_NONE. Proper
> interlacing support can be implemented later if desired.
>
> With this,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> I can apply those changes directly to my tree if you would prefer
> avoiding a v4.
Thanks, as Patch 3/4 need another round anyway. I'll update accordingly and
resend.
Best regards,
Alexander
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > ---
> > Changes in v3:
> > * Remove left-over interlace mode check
> >
> > drivers/media/platform/nxp/imx7-media-csi.c | 15 +--------------
> > 1 file changed, 1 insertion(+), 14 deletions(-)
> >
> > diff --git a/drivers/media/platform/nxp/imx7-media-csi.c
> > b/drivers/media/platform/nxp/imx7-media-csi.c index
> > b149374b07ee1..1315f5743b76f 100644
> > --- a/drivers/media/platform/nxp/imx7-media-csi.c
> > +++ b/drivers/media/platform/nxp/imx7-media-csi.c
> > @@ -1162,20 +1162,6 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format
> > *pixfmt,>
> > cc = imx7_csi_find_pixel_format(pixfmt->pixelformat);
> >
> > }
> >
> > - /* Allow IDMAC interweave but enforce field order from source. */
> > - if (V4L2_FIELD_IS_INTERLACED(pixfmt->field)) {
> > - switch (pixfmt->field) {
> > - case V4L2_FIELD_SEQ_TB:
> > - pixfmt->field = V4L2_FIELD_INTERLACED_TB;
> > - break;
> > - case V4L2_FIELD_SEQ_BT:
> > - pixfmt->field = V4L2_FIELD_INTERLACED_BT;
> > - break;
> > - default:
> > - break;
> > - }
> > - }
> > -
> >
> > /*
> >
> > * Round up width for minimum burst size.
> > *
> >
> > @@ -1187,6 +1173,7 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format
> > *pixfmt,>
> > pixfmt->bytesperline = pixfmt->width * cc->bpp / 8;
> > pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
> >
> > + pixfmt->field = V4L2_FIELD_NONE;
> >
> > return cc;
> >
> > }
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 2/4] media: imx: imx7-media-csi: Remove interlave fields
Date: Wed, 19 Apr 2023 09:02:44 +0200 [thread overview]
Message-ID: <3637672.ElGaqSPkdT@steina-w> (raw)
In-Reply-To: <20230418154351.GH30837@pendragon.ideasonboard.com>
Hi Laurent,
Am Dienstag, 18. April 2023, 17:43:51 CEST schrieb Laurent Pinchart:
> Hi Alexander,
>
> Thank you for the patch.
>
> In the subject line, "interlave" is misspelled. I'd write "Remove
> incorrect interlacing support"
Sounds much better, thanks. I'll change that.
> On Tue, Apr 18, 2023 at 02:20:39PM +0200, Alexander Stein wrote:
> > Interlaced mode is currently not supported, so disable fields in try_fmt.
>
> And here,
>
> The driver doesn't currently support interlacing, but due to legacy
> leftovers, it accepts values for the pixel format "field" field other
> than V4L2_FIELD_NONE. Fix it by hardcoding V4L2_FIELD_NONE. Proper
> interlacing support can be implemented later if desired.
>
> With this,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> I can apply those changes directly to my tree if you would prefer
> avoiding a v4.
Thanks, as Patch 3/4 need another round anyway. I'll update accordingly and
resend.
Best regards,
Alexander
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > ---
> > Changes in v3:
> > * Remove left-over interlace mode check
> >
> > drivers/media/platform/nxp/imx7-media-csi.c | 15 +--------------
> > 1 file changed, 1 insertion(+), 14 deletions(-)
> >
> > diff --git a/drivers/media/platform/nxp/imx7-media-csi.c
> > b/drivers/media/platform/nxp/imx7-media-csi.c index
> > b149374b07ee1..1315f5743b76f 100644
> > --- a/drivers/media/platform/nxp/imx7-media-csi.c
> > +++ b/drivers/media/platform/nxp/imx7-media-csi.c
> > @@ -1162,20 +1162,6 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format
> > *pixfmt,>
> > cc = imx7_csi_find_pixel_format(pixfmt->pixelformat);
> >
> > }
> >
> > - /* Allow IDMAC interweave but enforce field order from source. */
> > - if (V4L2_FIELD_IS_INTERLACED(pixfmt->field)) {
> > - switch (pixfmt->field) {
> > - case V4L2_FIELD_SEQ_TB:
> > - pixfmt->field = V4L2_FIELD_INTERLACED_TB;
> > - break;
> > - case V4L2_FIELD_SEQ_BT:
> > - pixfmt->field = V4L2_FIELD_INTERLACED_BT;
> > - break;
> > - default:
> > - break;
> > - }
> > - }
> > -
> >
> > /*
> >
> > * Round up width for minimum burst size.
> > *
> >
> > @@ -1187,6 +1173,7 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format
> > *pixfmt,>
> > pixfmt->bytesperline = pixfmt->width * cc->bpp / 8;
> > pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
> >
> > + pixfmt->field = V4L2_FIELD_NONE;
> >
> > return cc;
> >
> > }
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2023-04-19 7:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-18 12:20 [PATCH v3 0/4] Fix imx7-media-csi format settings Alexander Stein
2023-04-18 12:20 ` Alexander Stein
2023-04-18 12:20 ` [PATCH v3 1/4] media: imx: imx7-media-csi: Get rid of superfluous call to imx7_csi_mbus_fmt_to_pix_fmt Alexander Stein
2023-04-18 12:20 ` Alexander Stein
2023-04-18 15:35 ` Laurent Pinchart
2023-04-18 15:35 ` Laurent Pinchart
2023-04-18 12:20 ` [PATCH v3 2/4] media: imx: imx7-media-csi: Remove interlave fields Alexander Stein
2023-04-18 12:20 ` Alexander Stein
2023-04-18 15:43 ` Laurent Pinchart
2023-04-18 15:43 ` Laurent Pinchart
2023-04-19 7:02 ` Alexander Stein [this message]
2023-04-19 7:02 ` Alexander Stein
2023-04-18 12:20 ` [PATCH v3 3/4] media: imx: imx7-media-csi: Lift width constraints for 8bpp formats Alexander Stein
2023-04-18 12:20 ` Alexander Stein
2023-04-18 15:59 ` Laurent Pinchart
2023-04-18 15:59 ` Laurent Pinchart
2023-04-19 7:01 ` Alexander Stein
2023-04-19 7:01 ` Alexander Stein
2023-04-18 12:20 ` [PATCH v3 4/4] media: imx: imx7-media-csi: Init default format with __imx7_csi_video_try_fmt() Alexander Stein
2023-04-18 12:20 ` Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3637672.ElGaqSPkdT@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.