From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: alsa-devel@alsa-project.org, Felipe Balbi <balbi@kernel.org>,
Paul Walmsley <paul@pwsan.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Arnd Bergmann <arnd@arndb.de>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Tony Lindgren <tony@atomide.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Helge Deller <deller@gmx.de>,
linux-usb@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Janusz Krzysztofik <jmkrzyszt@gmail.com>,
Mark Brown <broonie@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
linux-omap@vger.kernel.org,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
Date: Thu, 31 Mar 2022 20:29:26 +0200 [thread overview]
Message-ID: <3657229.kQq0lBPeGt@dell> (raw)
In-Reply-To: <CAPDyKFo3sD-5OrfknMQt10D8A7ygMCUW3PV7EQ7L_MB9GxEDbQ@mail.gmail.com>
Hi Uffe,
On Thursday, 31 March 2022 11:19:43 CEST Ulf Hansson wrote:
> On Mon, 21 Mar 2022 at 22:54, Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote:
> >
> > In preparation for conversion of OMAP1 clocks to common clock framework,
> > identify users of those clocks which don't call clk_prepare/unprepare()
> > and update them to call clk_prepare_enable/clk_disable_unprepare() instead
> > of just clk_enable/disable(), as required by CCF implementation of clock
> > API.
> >
> > v2: update still a few more OMAP specific drivers missed in v1,
> > - call clk_prepare/unprepare() just after/before clk_get/put() where it
> > can make more sense than merging prepare/unprepare with enable/disable.
> >
> > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>
> Is there a specific reason why you can't split this into a per subsystem patch?
>
> Don't get me wrong, if you need my ack you have it, but I just wanted
> to know why this is?
There is no specific reason, I just didn't think of that, and indeed, that
is perfectly possible and will be more easy to handle. Please expect a
separate patch for each subsystem soon.
Thanks,
Janusz
>
> Kind regards
> Uffe
>
> > ---
> > arch/arm/mach-omap1/mcbsp.c | 8 ++++----
> > arch/arm/mach-omap1/ocpi.c | 4 ++--
> > arch/arm/mach-omap1/serial.c | 6 +++---
> > arch/arm/mach-omap1/timer32k.c | 2 +-
> > drivers/mmc/host/omap.c | 23 ++++++++++++++---------
> > drivers/usb/gadget/udc/omap_udc.c | 14 ++++++++------
> > drivers/usb/host/ohci-omap.c | 18 ++++++++++++++++--
> > drivers/video/fbdev/omap/hwa742.c | 6 +++---
> > drivers/video/fbdev/omap/lcdc.c | 6 +++---
> > drivers/video/fbdev/omap/sossi.c | 5 +++--
> > sound/soc/ti/osk5912.c | 9 ++++++++-
> > 11 files changed, 65 insertions(+), 36 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
> > index f36c34f47f11..3ec2badff6af 100644
> > --- a/arch/arm/mach-omap1/mcbsp.c
> > +++ b/arch/arm/mach-omap1/mcbsp.c
> > @@ -44,8 +44,8 @@ static void omap1_mcbsp_request(unsigned int id)
> > api_clk = clk_get(NULL, "api_ck");
> > dsp_clk = clk_get(NULL, "dsp_ck");
> > if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
> > - clk_enable(api_clk);
> > - clk_enable(dsp_clk);
> > + clk_prepare_enable(api_clk);
> > + clk_prepare_enable(dsp_clk);
> >
> > /*
> > * DSP external peripheral reset
> > @@ -63,11 +63,11 @@ static void omap1_mcbsp_free(unsigned int id)
> > if (id == 0 || id == 2) {
> > if (--dsp_use == 0) {
> > if (!IS_ERR(api_clk)) {
> > - clk_disable(api_clk);
> > + clk_disable_unprepare(api_clk);
> > clk_put(api_clk);
> > }
> > if (!IS_ERR(dsp_clk)) {
> > - clk_disable(dsp_clk);
> > + clk_disable_unprepare(dsp_clk);
> > clk_put(dsp_clk);
> > }
> > }
> > diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
> > index 380ea2de58c1..03cc48024fd6 100644
> > --- a/arch/arm/mach-omap1/ocpi.c
> > +++ b/arch/arm/mach-omap1/ocpi.c
> > @@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void)
> > if (IS_ERR(ocpi_ck))
> > return PTR_ERR(ocpi_ck);
> >
> > - clk_enable(ocpi_ck);
> > + clk_prepare_enable(ocpi_ck);
> > ocpi_enable();
> > pr_info("OMAP OCPI interconnect driver loaded\n");
> >
> > @@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void)
> > if (!cpu_is_omap16xx())
> > return;
> >
> > - clk_disable(ocpi_ck);
> > + clk_disable_unprepare(ocpi_ck);
> > clk_put(ocpi_ck);
> > }
> >
> > diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
> > index 9eb591fbfd89..5f591a836ab5 100644
> > --- a/arch/arm/mach-omap1/serial.c
> > +++ b/arch/arm/mach-omap1/serial.c
> > @@ -141,7 +141,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart1_ck))
> > printk("Could not get uart1_ck\n");
> > else {
> > - clk_enable(uart1_ck);
> > + clk_prepare_enable(uart1_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart1_ck, 12000000);
> > }
> > @@ -151,7 +151,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart2_ck))
> > printk("Could not get uart2_ck\n");
> > else {
> > - clk_enable(uart2_ck);
> > + clk_prepare_enable(uart2_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart2_ck, 12000000);
> > else
> > @@ -163,7 +163,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart3_ck))
> > printk("Could not get uart3_ck\n");
> > else {
> > - clk_enable(uart3_ck);
> > + clk_prepare_enable(uart3_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart3_ck, 12000000);
> > }
> > diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
> > index 780fdf03c3ce..049c7b7f28c4 100644
> > --- a/arch/arm/mach-omap1/timer32k.c
> > +++ b/arch/arm/mach-omap1/timer32k.c
> > @@ -180,7 +180,7 @@ int __init omap_32k_timer_init(void)
> >
> > sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
> > if (!IS_ERR(sync32k_ick))
> > - clk_enable(sync32k_ick);
> > + clk_prepare_enable(sync32k_ick);
> >
> > ret = omap_init_clocksource_32k(base);
> > }
> > diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
> > index 5e5af34090f1..57d39283924d 100644
> > --- a/drivers/mmc/host/omap.c
> > +++ b/drivers/mmc/host/omap.c
> > @@ -1374,7 +1374,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > host->iclk = clk_get(&pdev->dev, "ick");
> > if (IS_ERR(host->iclk))
> > return PTR_ERR(host->iclk);
> > - clk_enable(host->iclk);
> > + clk_prepare_enable(host->iclk);
> >
> > host->fclk = clk_get(&pdev->dev, "fck");
> > if (IS_ERR(host->fclk)) {
> > @@ -1382,16 +1382,18 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > goto err_free_iclk;
> > }
> >
> > + ret = clk_prepare(host->fclk);
> > + if (ret)
> > + goto err_put_fclk;
> > +
> > host->dma_tx_burst = -1;
> > host->dma_rx_burst = -1;
> >
> > host->dma_tx = dma_request_chan(&pdev->dev, "tx");
> > if (IS_ERR(host->dma_tx)) {
> > ret = PTR_ERR(host->dma_tx);
> > - if (ret == -EPROBE_DEFER) {
> > - clk_put(host->fclk);
> > - goto err_free_iclk;
> > - }
> > + if (ret == -EPROBE_DEFER)
> > + goto err_free_fclk;
> >
> > host->dma_tx = NULL;
> > dev_warn(host->dev, "TX DMA channel request failed\n");
> > @@ -1403,8 +1405,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > if (ret == -EPROBE_DEFER) {
> > if (host->dma_tx)
> > dma_release_channel(host->dma_tx);
> > - clk_put(host->fclk);
> > - goto err_free_iclk;
> > + goto err_free_fclk;
> > }
> >
> > host->dma_rx = NULL;
> > @@ -1454,9 +1455,12 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > dma_release_channel(host->dma_tx);
> > if (host->dma_rx)
> > dma_release_channel(host->dma_rx);
> > +err_free_fclk:
> > + clk_unprepare(host->fclk);
> > +err_put_fclk:
> > clk_put(host->fclk);
> > err_free_iclk:
> > - clk_disable(host->iclk);
> > + clk_disable_unprepare(host->iclk);
> > clk_put(host->iclk);
> > return ret;
> > }
> > @@ -1476,8 +1480,9 @@ static int mmc_omap_remove(struct platform_device *pdev)
> >
> > mmc_omap_fclk_enable(host, 0);
> > free_irq(host->irq, host);
> > + clk_unprepare(host->fclk);
> > clk_put(host->fclk);
> > - clk_disable(host->iclk);
> > + clk_disable_unprepare(host->iclk);
> > clk_put(host->iclk);
> >
> > if (host->dma_tx)
> > diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
> > index 494da00398d7..8768a3280e19 100644
> > --- a/drivers/usb/gadget/udc/omap_udc.c
> > +++ b/drivers/usb/gadget/udc/omap_udc.c
> > @@ -2604,6 +2604,8 @@ static void omap_udc_release(struct device *dev)
> > if (udc->dc_clk) {
> > if (udc->clk_requested)
> > omap_udc_enable_clock(0);
> > + clk_unprepare(udc->hhc_clk);
> > + clk_unprepare(udc->dc_clk);
> > clk_put(udc->hhc_clk);
> > clk_put(udc->dc_clk);
> > }
> > @@ -2768,8 +2770,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
> > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
> > /* can't use omap_udc_enable_clock yet */
> > - clk_enable(dc_clk);
> > - clk_enable(hhc_clk);
> > + clk_prepare_enable(dc_clk);
> > + clk_prepare_enable(hhc_clk);
> > udelay(100);
> > }
> >
> > @@ -2778,8 +2780,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
> > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
> > /* can't use omap_udc_enable_clock yet */
> > - clk_enable(dc_clk);
> > - clk_enable(hhc_clk);
> > + clk_prepare_enable(dc_clk);
> > + clk_prepare_enable(hhc_clk);
> > udelay(100);
> > }
> >
> > @@ -2927,8 +2929,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > usb_put_phy(xceiv);
> >
> > if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
> > - clk_disable(hhc_clk);
> > - clk_disable(dc_clk);
> > + clk_disable_unprepare(hhc_clk);
> > + clk_disable_unprepare(dc_clk);
> > clk_put(hhc_clk);
> > clk_put(dc_clk);
> > }
> > diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
> > index 45dcf8292072..2ab2e089a2b7 100644
> > --- a/drivers/usb/host/ohci-omap.c
> > +++ b/drivers/usb/host/ohci-omap.c
> > @@ -281,6 +281,10 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> > goto err_put_hcd;
> > }
> >
> > + retval = clk_prepare(priv->usb_host_ck);
> > + if (retval)
> > + goto err_put_host_ck;
> > +
> > if (!cpu_is_omap15xx())
> > priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
> > else
> > @@ -288,13 +292,17 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> >
> > if (IS_ERR(priv->usb_dc_ck)) {
> > retval = PTR_ERR(priv->usb_dc_ck);
> > - goto err_put_host_ck;
> > + goto err_unprepare_host_ck;
> > }
> >
> > + retval = clk_prepare(priv->usb_dc_ck);
> > + if (retval)
> > + goto err_put_dc_ck;
> > +
> > if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
> > dev_dbg(&pdev->dev, "request_mem_region failed\n");
> > retval = -EBUSY;
> > - goto err_put_dc_ck;
> > + goto err_unprepare_dc_ck;
> > }
> >
> > hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
> > @@ -319,8 +327,12 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> > iounmap(hcd->regs);
> > err2:
> > release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> > +err_unprepare_dc_ck:
> > + clk_unprepare(priv->usb_dc_ck);
> > err_put_dc_ck:
> > clk_put(priv->usb_dc_ck);
> > +err_unprepare_host_ck:
> > + clk_unprepare(priv->usb_host_ck);
> > err_put_host_ck:
> > clk_put(priv->usb_host_ck);
> > err_put_hcd:
> > @@ -355,7 +367,9 @@ static int ohci_hcd_omap_remove(struct platform_device *pdev)
> > }
> > iounmap(hcd->regs);
> > release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> > + clk_unprepare(priv->usb_dc_ck);
> > clk_put(priv->usb_dc_ck);
> > + clk_unprepare(priv->usb_host_ck);
> > clk_put(priv->usb_host_ck);
> > usb_put_hcd(hcd);
> > return 0;
> > diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
> > index b191bef22d98..9d9fe5c3a7a1 100644
> > --- a/drivers/video/fbdev/omap/hwa742.c
> > +++ b/drivers/video/fbdev/omap/hwa742.c
> > @@ -964,7 +964,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
> > if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
> > goto err3;
> > hwa742.extif->set_timings(&hwa742.reg_timings);
> > - clk_enable(hwa742.sys_ck);
> > + clk_prepare_enable(hwa742.sys_ck);
> >
> > calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
> > if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
> > @@ -1023,7 +1023,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
> >
> > return 0;
> > err4:
> > - clk_disable(hwa742.sys_ck);
> > + clk_disable_unprepare(hwa742.sys_ck);
> > err3:
> > hwa742.extif->cleanup();
> > err2:
> > @@ -1037,7 +1037,7 @@ static void hwa742_cleanup(void)
> > hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
> > hwa742.extif->cleanup();
> > hwa742.int_ctrl->cleanup();
> > - clk_disable(hwa742.sys_ck);
> > + clk_disable_unprepare(hwa742.sys_ck);
> > }
> >
> > struct lcd_ctrl hwa742_ctrl = {
> > diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
> > index 7317c9aad677..97d20dc0d1d0 100644
> > --- a/drivers/video/fbdev/omap/lcdc.c
> > +++ b/drivers/video/fbdev/omap/lcdc.c
> > @@ -711,7 +711,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> > dev_err(fbdev->dev, "failed to adjust LCD rate\n");
> > goto fail1;
> > }
> > - clk_enable(lcdc.lcd_ck);
> > + clk_prepare_enable(lcdc.lcd_ck);
> >
> > r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
> > if (r) {
> > @@ -746,7 +746,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> > fail3:
> > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> > fail2:
> > - clk_disable(lcdc.lcd_ck);
> > + clk_disable_unprepare(lcdc.lcd_ck);
> > fail1:
> > clk_put(lcdc.lcd_ck);
> > fail0:
> > @@ -760,7 +760,7 @@ static void omap_lcdc_cleanup(void)
> > free_fbmem();
> > omap_free_lcd_dma();
> > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> > - clk_disable(lcdc.lcd_ck);
> > + clk_disable_unprepare(lcdc.lcd_ck);
> > clk_put(lcdc.lcd_ck);
> > }
> >
> > diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
> > index 80ac67f27f0d..b9cb8b386627 100644
> > --- a/drivers/video/fbdev/omap/sossi.c
> > +++ b/drivers/video/fbdev/omap/sossi.c
> > @@ -598,7 +598,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > l &= ~CONF_SOSSI_RESET_R;
> > omap_writel(l, MOD_CONF_CTRL_1);
> >
> > - clk_enable(sossi.fck);
> > + clk_prepare_enable(sossi.fck);
> > l = omap_readl(ARM_IDLECT2);
> > l &= ~(1 << 8); /* DMACK_REQ */
> > omap_writel(l, ARM_IDLECT2);
> > @@ -649,7 +649,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > return 0;
> >
> > err:
> > - clk_disable(sossi.fck);
> > + clk_disable_unprepare(sossi.fck);
> > clk_put(sossi.fck);
> > return r;
> > }
> > @@ -657,6 +657,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > static void sossi_cleanup(void)
> > {
> > omap_lcdc_free_dma_callback();
> > + clk_unprepare(sossi.fck);
> > clk_put(sossi.fck);
> > iounmap(sossi.base);
> > }
> > diff --git a/sound/soc/ti/osk5912.c b/sound/soc/ti/osk5912.c
> > index 40e29dda7e7a..22da3b335e81 100644
> > --- a/sound/soc/ti/osk5912.c
> > +++ b/sound/soc/ti/osk5912.c
> > @@ -134,6 +134,10 @@ static int __init osk_soc_init(void)
> > goto err2;
> > }
> >
> > + err = clk_prepare(tlv320aic23_mclk);
> > + if (err)
> > + goto err3;
> > +
> > /*
> > * Configure 12 MHz output on MCLK.
> > */
> > @@ -142,7 +146,7 @@ static int __init osk_soc_init(void)
> > if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) {
> > printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
> > err = -ECANCELED;
> > - goto err3;
> > + goto err4;
> > }
> > }
> >
> > @@ -151,6 +155,8 @@ static int __init osk_soc_init(void)
> >
> > return 0;
> >
> > +err4:
> > + clk_unprepare(tlv320aic23_mclk);
> > err3:
> > clk_put(tlv320aic23_mclk);
> > err2:
> > @@ -164,6 +170,7 @@ static int __init osk_soc_init(void)
> >
> > static void __exit osk_soc_exit(void)
> > {
> > + clk_unprepare(tlv320aic23_mclk);
> > clk_put(tlv320aic23_mclk);
> > platform_device_unregister(osk_snd_device);
> > }
> > --
> > 2.35.1
> >
>
WARNING: multiple messages have this Message-ID (diff)
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>, Paul Walmsley <paul@pwsan.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Helge Deller <deller@gmx.de>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-usb@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Felipe Balbi <balbi@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-mmc@vger.kernel.org, alsa-devel@alsa-project.org,
Janusz Krzysztofik <jmkrzyszt@gmail.com>
Subject: Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
Date: Thu, 31 Mar 2022 20:29:26 +0200 [thread overview]
Message-ID: <3657229.kQq0lBPeGt@dell> (raw)
In-Reply-To: <CAPDyKFo3sD-5OrfknMQt10D8A7ygMCUW3PV7EQ7L_MB9GxEDbQ@mail.gmail.com>
Hi Uffe,
On Thursday, 31 March 2022 11:19:43 CEST Ulf Hansson wrote:
> On Mon, 21 Mar 2022 at 22:54, Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote:
> >
> > In preparation for conversion of OMAP1 clocks to common clock framework,
> > identify users of those clocks which don't call clk_prepare/unprepare()
> > and update them to call clk_prepare_enable/clk_disable_unprepare() instead
> > of just clk_enable/disable(), as required by CCF implementation of clock
> > API.
> >
> > v2: update still a few more OMAP specific drivers missed in v1,
> > - call clk_prepare/unprepare() just after/before clk_get/put() where it
> > can make more sense than merging prepare/unprepare with enable/disable.
> >
> > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>
> Is there a specific reason why you can't split this into a per subsystem patch?
>
> Don't get me wrong, if you need my ack you have it, but I just wanted
> to know why this is?
There is no specific reason, I just didn't think of that, and indeed, that
is perfectly possible and will be more easy to handle. Please expect a
separate patch for each subsystem soon.
Thanks,
Janusz
>
> Kind regards
> Uffe
>
> > ---
> > arch/arm/mach-omap1/mcbsp.c | 8 ++++----
> > arch/arm/mach-omap1/ocpi.c | 4 ++--
> > arch/arm/mach-omap1/serial.c | 6 +++---
> > arch/arm/mach-omap1/timer32k.c | 2 +-
> > drivers/mmc/host/omap.c | 23 ++++++++++++++---------
> > drivers/usb/gadget/udc/omap_udc.c | 14 ++++++++------
> > drivers/usb/host/ohci-omap.c | 18 ++++++++++++++++--
> > drivers/video/fbdev/omap/hwa742.c | 6 +++---
> > drivers/video/fbdev/omap/lcdc.c | 6 +++---
> > drivers/video/fbdev/omap/sossi.c | 5 +++--
> > sound/soc/ti/osk5912.c | 9 ++++++++-
> > 11 files changed, 65 insertions(+), 36 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
> > index f36c34f47f11..3ec2badff6af 100644
> > --- a/arch/arm/mach-omap1/mcbsp.c
> > +++ b/arch/arm/mach-omap1/mcbsp.c
> > @@ -44,8 +44,8 @@ static void omap1_mcbsp_request(unsigned int id)
> > api_clk = clk_get(NULL, "api_ck");
> > dsp_clk = clk_get(NULL, "dsp_ck");
> > if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
> > - clk_enable(api_clk);
> > - clk_enable(dsp_clk);
> > + clk_prepare_enable(api_clk);
> > + clk_prepare_enable(dsp_clk);
> >
> > /*
> > * DSP external peripheral reset
> > @@ -63,11 +63,11 @@ static void omap1_mcbsp_free(unsigned int id)
> > if (id == 0 || id == 2) {
> > if (--dsp_use == 0) {
> > if (!IS_ERR(api_clk)) {
> > - clk_disable(api_clk);
> > + clk_disable_unprepare(api_clk);
> > clk_put(api_clk);
> > }
> > if (!IS_ERR(dsp_clk)) {
> > - clk_disable(dsp_clk);
> > + clk_disable_unprepare(dsp_clk);
> > clk_put(dsp_clk);
> > }
> > }
> > diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
> > index 380ea2de58c1..03cc48024fd6 100644
> > --- a/arch/arm/mach-omap1/ocpi.c
> > +++ b/arch/arm/mach-omap1/ocpi.c
> > @@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void)
> > if (IS_ERR(ocpi_ck))
> > return PTR_ERR(ocpi_ck);
> >
> > - clk_enable(ocpi_ck);
> > + clk_prepare_enable(ocpi_ck);
> > ocpi_enable();
> > pr_info("OMAP OCPI interconnect driver loaded\n");
> >
> > @@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void)
> > if (!cpu_is_omap16xx())
> > return;
> >
> > - clk_disable(ocpi_ck);
> > + clk_disable_unprepare(ocpi_ck);
> > clk_put(ocpi_ck);
> > }
> >
> > diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
> > index 9eb591fbfd89..5f591a836ab5 100644
> > --- a/arch/arm/mach-omap1/serial.c
> > +++ b/arch/arm/mach-omap1/serial.c
> > @@ -141,7 +141,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart1_ck))
> > printk("Could not get uart1_ck\n");
> > else {
> > - clk_enable(uart1_ck);
> > + clk_prepare_enable(uart1_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart1_ck, 12000000);
> > }
> > @@ -151,7 +151,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart2_ck))
> > printk("Could not get uart2_ck\n");
> > else {
> > - clk_enable(uart2_ck);
> > + clk_prepare_enable(uart2_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart2_ck, 12000000);
> > else
> > @@ -163,7 +163,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart3_ck))
> > printk("Could not get uart3_ck\n");
> > else {
> > - clk_enable(uart3_ck);
> > + clk_prepare_enable(uart3_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart3_ck, 12000000);
> > }
> > diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
> > index 780fdf03c3ce..049c7b7f28c4 100644
> > --- a/arch/arm/mach-omap1/timer32k.c
> > +++ b/arch/arm/mach-omap1/timer32k.c
> > @@ -180,7 +180,7 @@ int __init omap_32k_timer_init(void)
> >
> > sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
> > if (!IS_ERR(sync32k_ick))
> > - clk_enable(sync32k_ick);
> > + clk_prepare_enable(sync32k_ick);
> >
> > ret = omap_init_clocksource_32k(base);
> > }
> > diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
> > index 5e5af34090f1..57d39283924d 100644
> > --- a/drivers/mmc/host/omap.c
> > +++ b/drivers/mmc/host/omap.c
> > @@ -1374,7 +1374,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > host->iclk = clk_get(&pdev->dev, "ick");
> > if (IS_ERR(host->iclk))
> > return PTR_ERR(host->iclk);
> > - clk_enable(host->iclk);
> > + clk_prepare_enable(host->iclk);
> >
> > host->fclk = clk_get(&pdev->dev, "fck");
> > if (IS_ERR(host->fclk)) {
> > @@ -1382,16 +1382,18 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > goto err_free_iclk;
> > }
> >
> > + ret = clk_prepare(host->fclk);
> > + if (ret)
> > + goto err_put_fclk;
> > +
> > host->dma_tx_burst = -1;
> > host->dma_rx_burst = -1;
> >
> > host->dma_tx = dma_request_chan(&pdev->dev, "tx");
> > if (IS_ERR(host->dma_tx)) {
> > ret = PTR_ERR(host->dma_tx);
> > - if (ret == -EPROBE_DEFER) {
> > - clk_put(host->fclk);
> > - goto err_free_iclk;
> > - }
> > + if (ret == -EPROBE_DEFER)
> > + goto err_free_fclk;
> >
> > host->dma_tx = NULL;
> > dev_warn(host->dev, "TX DMA channel request failed\n");
> > @@ -1403,8 +1405,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > if (ret == -EPROBE_DEFER) {
> > if (host->dma_tx)
> > dma_release_channel(host->dma_tx);
> > - clk_put(host->fclk);
> > - goto err_free_iclk;
> > + goto err_free_fclk;
> > }
> >
> > host->dma_rx = NULL;
> > @@ -1454,9 +1455,12 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > dma_release_channel(host->dma_tx);
> > if (host->dma_rx)
> > dma_release_channel(host->dma_rx);
> > +err_free_fclk:
> > + clk_unprepare(host->fclk);
> > +err_put_fclk:
> > clk_put(host->fclk);
> > err_free_iclk:
> > - clk_disable(host->iclk);
> > + clk_disable_unprepare(host->iclk);
> > clk_put(host->iclk);
> > return ret;
> > }
> > @@ -1476,8 +1480,9 @@ static int mmc_omap_remove(struct platform_device *pdev)
> >
> > mmc_omap_fclk_enable(host, 0);
> > free_irq(host->irq, host);
> > + clk_unprepare(host->fclk);
> > clk_put(host->fclk);
> > - clk_disable(host->iclk);
> > + clk_disable_unprepare(host->iclk);
> > clk_put(host->iclk);
> >
> > if (host->dma_tx)
> > diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
> > index 494da00398d7..8768a3280e19 100644
> > --- a/drivers/usb/gadget/udc/omap_udc.c
> > +++ b/drivers/usb/gadget/udc/omap_udc.c
> > @@ -2604,6 +2604,8 @@ static void omap_udc_release(struct device *dev)
> > if (udc->dc_clk) {
> > if (udc->clk_requested)
> > omap_udc_enable_clock(0);
> > + clk_unprepare(udc->hhc_clk);
> > + clk_unprepare(udc->dc_clk);
> > clk_put(udc->hhc_clk);
> > clk_put(udc->dc_clk);
> > }
> > @@ -2768,8 +2770,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
> > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
> > /* can't use omap_udc_enable_clock yet */
> > - clk_enable(dc_clk);
> > - clk_enable(hhc_clk);
> > + clk_prepare_enable(dc_clk);
> > + clk_prepare_enable(hhc_clk);
> > udelay(100);
> > }
> >
> > @@ -2778,8 +2780,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
> > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
> > /* can't use omap_udc_enable_clock yet */
> > - clk_enable(dc_clk);
> > - clk_enable(hhc_clk);
> > + clk_prepare_enable(dc_clk);
> > + clk_prepare_enable(hhc_clk);
> > udelay(100);
> > }
> >
> > @@ -2927,8 +2929,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > usb_put_phy(xceiv);
> >
> > if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
> > - clk_disable(hhc_clk);
> > - clk_disable(dc_clk);
> > + clk_disable_unprepare(hhc_clk);
> > + clk_disable_unprepare(dc_clk);
> > clk_put(hhc_clk);
> > clk_put(dc_clk);
> > }
> > diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
> > index 45dcf8292072..2ab2e089a2b7 100644
> > --- a/drivers/usb/host/ohci-omap.c
> > +++ b/drivers/usb/host/ohci-omap.c
> > @@ -281,6 +281,10 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> > goto err_put_hcd;
> > }
> >
> > + retval = clk_prepare(priv->usb_host_ck);
> > + if (retval)
> > + goto err_put_host_ck;
> > +
> > if (!cpu_is_omap15xx())
> > priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
> > else
> > @@ -288,13 +292,17 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> >
> > if (IS_ERR(priv->usb_dc_ck)) {
> > retval = PTR_ERR(priv->usb_dc_ck);
> > - goto err_put_host_ck;
> > + goto err_unprepare_host_ck;
> > }
> >
> > + retval = clk_prepare(priv->usb_dc_ck);
> > + if (retval)
> > + goto err_put_dc_ck;
> > +
> > if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
> > dev_dbg(&pdev->dev, "request_mem_region failed\n");
> > retval = -EBUSY;
> > - goto err_put_dc_ck;
> > + goto err_unprepare_dc_ck;
> > }
> >
> > hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
> > @@ -319,8 +327,12 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> > iounmap(hcd->regs);
> > err2:
> > release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> > +err_unprepare_dc_ck:
> > + clk_unprepare(priv->usb_dc_ck);
> > err_put_dc_ck:
> > clk_put(priv->usb_dc_ck);
> > +err_unprepare_host_ck:
> > + clk_unprepare(priv->usb_host_ck);
> > err_put_host_ck:
> > clk_put(priv->usb_host_ck);
> > err_put_hcd:
> > @@ -355,7 +367,9 @@ static int ohci_hcd_omap_remove(struct platform_device *pdev)
> > }
> > iounmap(hcd->regs);
> > release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> > + clk_unprepare(priv->usb_dc_ck);
> > clk_put(priv->usb_dc_ck);
> > + clk_unprepare(priv->usb_host_ck);
> > clk_put(priv->usb_host_ck);
> > usb_put_hcd(hcd);
> > return 0;
> > diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
> > index b191bef22d98..9d9fe5c3a7a1 100644
> > --- a/drivers/video/fbdev/omap/hwa742.c
> > +++ b/drivers/video/fbdev/omap/hwa742.c
> > @@ -964,7 +964,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
> > if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
> > goto err3;
> > hwa742.extif->set_timings(&hwa742.reg_timings);
> > - clk_enable(hwa742.sys_ck);
> > + clk_prepare_enable(hwa742.sys_ck);
> >
> > calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
> > if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
> > @@ -1023,7 +1023,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
> >
> > return 0;
> > err4:
> > - clk_disable(hwa742.sys_ck);
> > + clk_disable_unprepare(hwa742.sys_ck);
> > err3:
> > hwa742.extif->cleanup();
> > err2:
> > @@ -1037,7 +1037,7 @@ static void hwa742_cleanup(void)
> > hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
> > hwa742.extif->cleanup();
> > hwa742.int_ctrl->cleanup();
> > - clk_disable(hwa742.sys_ck);
> > + clk_disable_unprepare(hwa742.sys_ck);
> > }
> >
> > struct lcd_ctrl hwa742_ctrl = {
> > diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
> > index 7317c9aad677..97d20dc0d1d0 100644
> > --- a/drivers/video/fbdev/omap/lcdc.c
> > +++ b/drivers/video/fbdev/omap/lcdc.c
> > @@ -711,7 +711,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> > dev_err(fbdev->dev, "failed to adjust LCD rate\n");
> > goto fail1;
> > }
> > - clk_enable(lcdc.lcd_ck);
> > + clk_prepare_enable(lcdc.lcd_ck);
> >
> > r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
> > if (r) {
> > @@ -746,7 +746,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> > fail3:
> > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> > fail2:
> > - clk_disable(lcdc.lcd_ck);
> > + clk_disable_unprepare(lcdc.lcd_ck);
> > fail1:
> > clk_put(lcdc.lcd_ck);
> > fail0:
> > @@ -760,7 +760,7 @@ static void omap_lcdc_cleanup(void)
> > free_fbmem();
> > omap_free_lcd_dma();
> > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> > - clk_disable(lcdc.lcd_ck);
> > + clk_disable_unprepare(lcdc.lcd_ck);
> > clk_put(lcdc.lcd_ck);
> > }
> >
> > diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
> > index 80ac67f27f0d..b9cb8b386627 100644
> > --- a/drivers/video/fbdev/omap/sossi.c
> > +++ b/drivers/video/fbdev/omap/sossi.c
> > @@ -598,7 +598,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > l &= ~CONF_SOSSI_RESET_R;
> > omap_writel(l, MOD_CONF_CTRL_1);
> >
> > - clk_enable(sossi.fck);
> > + clk_prepare_enable(sossi.fck);
> > l = omap_readl(ARM_IDLECT2);
> > l &= ~(1 << 8); /* DMACK_REQ */
> > omap_writel(l, ARM_IDLECT2);
> > @@ -649,7 +649,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > return 0;
> >
> > err:
> > - clk_disable(sossi.fck);
> > + clk_disable_unprepare(sossi.fck);
> > clk_put(sossi.fck);
> > return r;
> > }
> > @@ -657,6 +657,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > static void sossi_cleanup(void)
> > {
> > omap_lcdc_free_dma_callback();
> > + clk_unprepare(sossi.fck);
> > clk_put(sossi.fck);
> > iounmap(sossi.base);
> > }
> > diff --git a/sound/soc/ti/osk5912.c b/sound/soc/ti/osk5912.c
> > index 40e29dda7e7a..22da3b335e81 100644
> > --- a/sound/soc/ti/osk5912.c
> > +++ b/sound/soc/ti/osk5912.c
> > @@ -134,6 +134,10 @@ static int __init osk_soc_init(void)
> > goto err2;
> > }
> >
> > + err = clk_prepare(tlv320aic23_mclk);
> > + if (err)
> > + goto err3;
> > +
> > /*
> > * Configure 12 MHz output on MCLK.
> > */
> > @@ -142,7 +146,7 @@ static int __init osk_soc_init(void)
> > if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) {
> > printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
> > err = -ECANCELED;
> > - goto err3;
> > + goto err4;
> > }
> > }
> >
> > @@ -151,6 +155,8 @@ static int __init osk_soc_init(void)
> >
> > return 0;
> >
> > +err4:
> > + clk_unprepare(tlv320aic23_mclk);
> > err3:
> > clk_put(tlv320aic23_mclk);
> > err2:
> > @@ -164,6 +170,7 @@ static int __init osk_soc_init(void)
> >
> > static void __exit osk_soc_exit(void)
> > {
> > + clk_unprepare(tlv320aic23_mclk);
> > clk_put(tlv320aic23_mclk);
> > platform_device_unregister(osk_snd_device);
> > }
> > --
> > 2.35.1
> >
>
WARNING: multiple messages have this Message-ID (diff)
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>, Paul Walmsley <paul@pwsan.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Helge Deller <deller@gmx.de>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-usb@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Felipe Balbi <balbi@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-mmc@vger.kernel.org, alsa-devel@alsa-project.org,
Janusz Krzysztofik <jmkrzyszt@gmail.com>
Subject: Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
Date: Thu, 31 Mar 2022 20:29:26 +0200 [thread overview]
Message-ID: <3657229.kQq0lBPeGt@dell> (raw)
In-Reply-To: <CAPDyKFo3sD-5OrfknMQt10D8A7ygMCUW3PV7EQ7L_MB9GxEDbQ@mail.gmail.com>
Hi Uffe,
On Thursday, 31 March 2022 11:19:43 CEST Ulf Hansson wrote:
> On Mon, 21 Mar 2022 at 22:54, Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote:
> >
> > In preparation for conversion of OMAP1 clocks to common clock framework,
> > identify users of those clocks which don't call clk_prepare/unprepare()
> > and update them to call clk_prepare_enable/clk_disable_unprepare() instead
> > of just clk_enable/disable(), as required by CCF implementation of clock
> > API.
> >
> > v2: update still a few more OMAP specific drivers missed in v1,
> > - call clk_prepare/unprepare() just after/before clk_get/put() where it
> > can make more sense than merging prepare/unprepare with enable/disable.
> >
> > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>
> Is there a specific reason why you can't split this into a per subsystem patch?
>
> Don't get me wrong, if you need my ack you have it, but I just wanted
> to know why this is?
There is no specific reason, I just didn't think of that, and indeed, that
is perfectly possible and will be more easy to handle. Please expect a
separate patch for each subsystem soon.
Thanks,
Janusz
>
> Kind regards
> Uffe
>
> > ---
> > arch/arm/mach-omap1/mcbsp.c | 8 ++++----
> > arch/arm/mach-omap1/ocpi.c | 4 ++--
> > arch/arm/mach-omap1/serial.c | 6 +++---
> > arch/arm/mach-omap1/timer32k.c | 2 +-
> > drivers/mmc/host/omap.c | 23 ++++++++++++++---------
> > drivers/usb/gadget/udc/omap_udc.c | 14 ++++++++------
> > drivers/usb/host/ohci-omap.c | 18 ++++++++++++++++--
> > drivers/video/fbdev/omap/hwa742.c | 6 +++---
> > drivers/video/fbdev/omap/lcdc.c | 6 +++---
> > drivers/video/fbdev/omap/sossi.c | 5 +++--
> > sound/soc/ti/osk5912.c | 9 ++++++++-
> > 11 files changed, 65 insertions(+), 36 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
> > index f36c34f47f11..3ec2badff6af 100644
> > --- a/arch/arm/mach-omap1/mcbsp.c
> > +++ b/arch/arm/mach-omap1/mcbsp.c
> > @@ -44,8 +44,8 @@ static void omap1_mcbsp_request(unsigned int id)
> > api_clk = clk_get(NULL, "api_ck");
> > dsp_clk = clk_get(NULL, "dsp_ck");
> > if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
> > - clk_enable(api_clk);
> > - clk_enable(dsp_clk);
> > + clk_prepare_enable(api_clk);
> > + clk_prepare_enable(dsp_clk);
> >
> > /*
> > * DSP external peripheral reset
> > @@ -63,11 +63,11 @@ static void omap1_mcbsp_free(unsigned int id)
> > if (id == 0 || id == 2) {
> > if (--dsp_use == 0) {
> > if (!IS_ERR(api_clk)) {
> > - clk_disable(api_clk);
> > + clk_disable_unprepare(api_clk);
> > clk_put(api_clk);
> > }
> > if (!IS_ERR(dsp_clk)) {
> > - clk_disable(dsp_clk);
> > + clk_disable_unprepare(dsp_clk);
> > clk_put(dsp_clk);
> > }
> > }
> > diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
> > index 380ea2de58c1..03cc48024fd6 100644
> > --- a/arch/arm/mach-omap1/ocpi.c
> > +++ b/arch/arm/mach-omap1/ocpi.c
> > @@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void)
> > if (IS_ERR(ocpi_ck))
> > return PTR_ERR(ocpi_ck);
> >
> > - clk_enable(ocpi_ck);
> > + clk_prepare_enable(ocpi_ck);
> > ocpi_enable();
> > pr_info("OMAP OCPI interconnect driver loaded\n");
> >
> > @@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void)
> > if (!cpu_is_omap16xx())
> > return;
> >
> > - clk_disable(ocpi_ck);
> > + clk_disable_unprepare(ocpi_ck);
> > clk_put(ocpi_ck);
> > }
> >
> > diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
> > index 9eb591fbfd89..5f591a836ab5 100644
> > --- a/arch/arm/mach-omap1/serial.c
> > +++ b/arch/arm/mach-omap1/serial.c
> > @@ -141,7 +141,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart1_ck))
> > printk("Could not get uart1_ck\n");
> > else {
> > - clk_enable(uart1_ck);
> > + clk_prepare_enable(uart1_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart1_ck, 12000000);
> > }
> > @@ -151,7 +151,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart2_ck))
> > printk("Could not get uart2_ck\n");
> > else {
> > - clk_enable(uart2_ck);
> > + clk_prepare_enable(uart2_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart2_ck, 12000000);
> > else
> > @@ -163,7 +163,7 @@ void __init omap_serial_init(void)
> > if (IS_ERR(uart3_ck))
> > printk("Could not get uart3_ck\n");
> > else {
> > - clk_enable(uart3_ck);
> > + clk_prepare_enable(uart3_ck);
> > if (cpu_is_omap15xx())
> > clk_set_rate(uart3_ck, 12000000);
> > }
> > diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
> > index 780fdf03c3ce..049c7b7f28c4 100644
> > --- a/arch/arm/mach-omap1/timer32k.c
> > +++ b/arch/arm/mach-omap1/timer32k.c
> > @@ -180,7 +180,7 @@ int __init omap_32k_timer_init(void)
> >
> > sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
> > if (!IS_ERR(sync32k_ick))
> > - clk_enable(sync32k_ick);
> > + clk_prepare_enable(sync32k_ick);
> >
> > ret = omap_init_clocksource_32k(base);
> > }
> > diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
> > index 5e5af34090f1..57d39283924d 100644
> > --- a/drivers/mmc/host/omap.c
> > +++ b/drivers/mmc/host/omap.c
> > @@ -1374,7 +1374,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > host->iclk = clk_get(&pdev->dev, "ick");
> > if (IS_ERR(host->iclk))
> > return PTR_ERR(host->iclk);
> > - clk_enable(host->iclk);
> > + clk_prepare_enable(host->iclk);
> >
> > host->fclk = clk_get(&pdev->dev, "fck");
> > if (IS_ERR(host->fclk)) {
> > @@ -1382,16 +1382,18 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > goto err_free_iclk;
> > }
> >
> > + ret = clk_prepare(host->fclk);
> > + if (ret)
> > + goto err_put_fclk;
> > +
> > host->dma_tx_burst = -1;
> > host->dma_rx_burst = -1;
> >
> > host->dma_tx = dma_request_chan(&pdev->dev, "tx");
> > if (IS_ERR(host->dma_tx)) {
> > ret = PTR_ERR(host->dma_tx);
> > - if (ret == -EPROBE_DEFER) {
> > - clk_put(host->fclk);
> > - goto err_free_iclk;
> > - }
> > + if (ret == -EPROBE_DEFER)
> > + goto err_free_fclk;
> >
> > host->dma_tx = NULL;
> > dev_warn(host->dev, "TX DMA channel request failed\n");
> > @@ -1403,8 +1405,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > if (ret == -EPROBE_DEFER) {
> > if (host->dma_tx)
> > dma_release_channel(host->dma_tx);
> > - clk_put(host->fclk);
> > - goto err_free_iclk;
> > + goto err_free_fclk;
> > }
> >
> > host->dma_rx = NULL;
> > @@ -1454,9 +1455,12 @@ static int mmc_omap_probe(struct platform_device *pdev)
> > dma_release_channel(host->dma_tx);
> > if (host->dma_rx)
> > dma_release_channel(host->dma_rx);
> > +err_free_fclk:
> > + clk_unprepare(host->fclk);
> > +err_put_fclk:
> > clk_put(host->fclk);
> > err_free_iclk:
> > - clk_disable(host->iclk);
> > + clk_disable_unprepare(host->iclk);
> > clk_put(host->iclk);
> > return ret;
> > }
> > @@ -1476,8 +1480,9 @@ static int mmc_omap_remove(struct platform_device *pdev)
> >
> > mmc_omap_fclk_enable(host, 0);
> > free_irq(host->irq, host);
> > + clk_unprepare(host->fclk);
> > clk_put(host->fclk);
> > - clk_disable(host->iclk);
> > + clk_disable_unprepare(host->iclk);
> > clk_put(host->iclk);
> >
> > if (host->dma_tx)
> > diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
> > index 494da00398d7..8768a3280e19 100644
> > --- a/drivers/usb/gadget/udc/omap_udc.c
> > +++ b/drivers/usb/gadget/udc/omap_udc.c
> > @@ -2604,6 +2604,8 @@ static void omap_udc_release(struct device *dev)
> > if (udc->dc_clk) {
> > if (udc->clk_requested)
> > omap_udc_enable_clock(0);
> > + clk_unprepare(udc->hhc_clk);
> > + clk_unprepare(udc->dc_clk);
> > clk_put(udc->hhc_clk);
> > clk_put(udc->dc_clk);
> > }
> > @@ -2768,8 +2770,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
> > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
> > /* can't use omap_udc_enable_clock yet */
> > - clk_enable(dc_clk);
> > - clk_enable(hhc_clk);
> > + clk_prepare_enable(dc_clk);
> > + clk_prepare_enable(hhc_clk);
> > udelay(100);
> > }
> >
> > @@ -2778,8 +2780,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
> > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
> > /* can't use omap_udc_enable_clock yet */
> > - clk_enable(dc_clk);
> > - clk_enable(hhc_clk);
> > + clk_prepare_enable(dc_clk);
> > + clk_prepare_enable(hhc_clk);
> > udelay(100);
> > }
> >
> > @@ -2927,8 +2929,8 @@ static int omap_udc_probe(struct platform_device *pdev)
> > usb_put_phy(xceiv);
> >
> > if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
> > - clk_disable(hhc_clk);
> > - clk_disable(dc_clk);
> > + clk_disable_unprepare(hhc_clk);
> > + clk_disable_unprepare(dc_clk);
> > clk_put(hhc_clk);
> > clk_put(dc_clk);
> > }
> > diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
> > index 45dcf8292072..2ab2e089a2b7 100644
> > --- a/drivers/usb/host/ohci-omap.c
> > +++ b/drivers/usb/host/ohci-omap.c
> > @@ -281,6 +281,10 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> > goto err_put_hcd;
> > }
> >
> > + retval = clk_prepare(priv->usb_host_ck);
> > + if (retval)
> > + goto err_put_host_ck;
> > +
> > if (!cpu_is_omap15xx())
> > priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
> > else
> > @@ -288,13 +292,17 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> >
> > if (IS_ERR(priv->usb_dc_ck)) {
> > retval = PTR_ERR(priv->usb_dc_ck);
> > - goto err_put_host_ck;
> > + goto err_unprepare_host_ck;
> > }
> >
> > + retval = clk_prepare(priv->usb_dc_ck);
> > + if (retval)
> > + goto err_put_dc_ck;
> > +
> > if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
> > dev_dbg(&pdev->dev, "request_mem_region failed\n");
> > retval = -EBUSY;
> > - goto err_put_dc_ck;
> > + goto err_unprepare_dc_ck;
> > }
> >
> > hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
> > @@ -319,8 +327,12 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
> > iounmap(hcd->regs);
> > err2:
> > release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> > +err_unprepare_dc_ck:
> > + clk_unprepare(priv->usb_dc_ck);
> > err_put_dc_ck:
> > clk_put(priv->usb_dc_ck);
> > +err_unprepare_host_ck:
> > + clk_unprepare(priv->usb_host_ck);
> > err_put_host_ck:
> > clk_put(priv->usb_host_ck);
> > err_put_hcd:
> > @@ -355,7 +367,9 @@ static int ohci_hcd_omap_remove(struct platform_device *pdev)
> > }
> > iounmap(hcd->regs);
> > release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> > + clk_unprepare(priv->usb_dc_ck);
> > clk_put(priv->usb_dc_ck);
> > + clk_unprepare(priv->usb_host_ck);
> > clk_put(priv->usb_host_ck);
> > usb_put_hcd(hcd);
> > return 0;
> > diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
> > index b191bef22d98..9d9fe5c3a7a1 100644
> > --- a/drivers/video/fbdev/omap/hwa742.c
> > +++ b/drivers/video/fbdev/omap/hwa742.c
> > @@ -964,7 +964,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
> > if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
> > goto err3;
> > hwa742.extif->set_timings(&hwa742.reg_timings);
> > - clk_enable(hwa742.sys_ck);
> > + clk_prepare_enable(hwa742.sys_ck);
> >
> > calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
> > if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
> > @@ -1023,7 +1023,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
> >
> > return 0;
> > err4:
> > - clk_disable(hwa742.sys_ck);
> > + clk_disable_unprepare(hwa742.sys_ck);
> > err3:
> > hwa742.extif->cleanup();
> > err2:
> > @@ -1037,7 +1037,7 @@ static void hwa742_cleanup(void)
> > hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
> > hwa742.extif->cleanup();
> > hwa742.int_ctrl->cleanup();
> > - clk_disable(hwa742.sys_ck);
> > + clk_disable_unprepare(hwa742.sys_ck);
> > }
> >
> > struct lcd_ctrl hwa742_ctrl = {
> > diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
> > index 7317c9aad677..97d20dc0d1d0 100644
> > --- a/drivers/video/fbdev/omap/lcdc.c
> > +++ b/drivers/video/fbdev/omap/lcdc.c
> > @@ -711,7 +711,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> > dev_err(fbdev->dev, "failed to adjust LCD rate\n");
> > goto fail1;
> > }
> > - clk_enable(lcdc.lcd_ck);
> > + clk_prepare_enable(lcdc.lcd_ck);
> >
> > r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
> > if (r) {
> > @@ -746,7 +746,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> > fail3:
> > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> > fail2:
> > - clk_disable(lcdc.lcd_ck);
> > + clk_disable_unprepare(lcdc.lcd_ck);
> > fail1:
> > clk_put(lcdc.lcd_ck);
> > fail0:
> > @@ -760,7 +760,7 @@ static void omap_lcdc_cleanup(void)
> > free_fbmem();
> > omap_free_lcd_dma();
> > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> > - clk_disable(lcdc.lcd_ck);
> > + clk_disable_unprepare(lcdc.lcd_ck);
> > clk_put(lcdc.lcd_ck);
> > }
> >
> > diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
> > index 80ac67f27f0d..b9cb8b386627 100644
> > --- a/drivers/video/fbdev/omap/sossi.c
> > +++ b/drivers/video/fbdev/omap/sossi.c
> > @@ -598,7 +598,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > l &= ~CONF_SOSSI_RESET_R;
> > omap_writel(l, MOD_CONF_CTRL_1);
> >
> > - clk_enable(sossi.fck);
> > + clk_prepare_enable(sossi.fck);
> > l = omap_readl(ARM_IDLECT2);
> > l &= ~(1 << 8); /* DMACK_REQ */
> > omap_writel(l, ARM_IDLECT2);
> > @@ -649,7 +649,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > return 0;
> >
> > err:
> > - clk_disable(sossi.fck);
> > + clk_disable_unprepare(sossi.fck);
> > clk_put(sossi.fck);
> > return r;
> > }
> > @@ -657,6 +657,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> > static void sossi_cleanup(void)
> > {
> > omap_lcdc_free_dma_callback();
> > + clk_unprepare(sossi.fck);
> > clk_put(sossi.fck);
> > iounmap(sossi.base);
> > }
> > diff --git a/sound/soc/ti/osk5912.c b/sound/soc/ti/osk5912.c
> > index 40e29dda7e7a..22da3b335e81 100644
> > --- a/sound/soc/ti/osk5912.c
> > +++ b/sound/soc/ti/osk5912.c
> > @@ -134,6 +134,10 @@ static int __init osk_soc_init(void)
> > goto err2;
> > }
> >
> > + err = clk_prepare(tlv320aic23_mclk);
> > + if (err)
> > + goto err3;
> > +
> > /*
> > * Configure 12 MHz output on MCLK.
> > */
> > @@ -142,7 +146,7 @@ static int __init osk_soc_init(void)
> > if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) {
> > printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
> > err = -ECANCELED;
> > - goto err3;
> > + goto err4;
> > }
> > }
> >
> > @@ -151,6 +155,8 @@ static int __init osk_soc_init(void)
> >
> > return 0;
> >
> > +err4:
> > + clk_unprepare(tlv320aic23_mclk);
> > err3:
> > clk_put(tlv320aic23_mclk);
> > err2:
> > @@ -164,6 +170,7 @@ static int __init osk_soc_init(void)
> >
> > static void __exit osk_soc_exit(void)
> > {
> > + clk_unprepare(tlv320aic23_mclk);
> > clk_put(tlv320aic23_mclk);
> > platform_device_unregister(osk_snd_device);
> > }
> > --
> > 2.35.1
> >
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-31 18:30 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-10 23:33 [RFC RFT PATCH 0/4] ARM: OMAP1: clock: Convert to CCF Janusz Krzysztofik
2022-03-10 23:33 ` Janusz Krzysztofik
2022-03-10 23:33 ` [RFC PATCH 1/4] ARM: OMAP1: clock: Remove unused code Janusz Krzysztofik
2022-03-10 23:33 ` Janusz Krzysztofik
2022-03-10 23:33 ` [RFC PATCH 2/4] ARM: OMAP1: clock: Remove noop code Janusz Krzysztofik
2022-03-10 23:33 ` Janusz Krzysztofik
2022-03-21 21:54 ` [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF Janusz Krzysztofik
2022-03-21 21:54 ` Janusz Krzysztofik
2022-03-21 21:54 ` Janusz Krzysztofik
2022-03-22 12:02 ` Mark Brown
2022-03-22 12:02 ` Mark Brown
2022-03-22 12:02 ` Mark Brown
2022-03-22 16:36 ` Aaro Koskinen
2022-03-22 16:36 ` Aaro Koskinen
2022-03-22 16:36 ` Aaro Koskinen
2022-03-22 19:07 ` Aaro Koskinen
2022-03-22 19:07 ` Aaro Koskinen
2022-03-22 19:07 ` Aaro Koskinen
2022-03-26 21:17 ` Janusz Krzysztofik
2022-03-26 21:17 ` Janusz Krzysztofik
2022-03-26 21:17 ` Janusz Krzysztofik
2022-04-06 13:21 ` Aaro Koskinen
2022-04-06 13:21 ` Aaro Koskinen
2022-04-06 13:21 ` Aaro Koskinen
2022-04-06 18:48 ` Janusz Krzysztofik
2022-04-06 18:48 ` Janusz Krzysztofik
2022-04-06 18:48 ` Janusz Krzysztofik
2022-04-06 20:00 ` Aaro Koskinen
2022-04-06 20:00 ` Aaro Koskinen
2022-04-06 20:00 ` Aaro Koskinen
2022-03-31 9:19 ` Ulf Hansson
2022-03-31 9:19 ` Ulf Hansson
2022-03-31 9:19 ` Ulf Hansson
2022-03-31 18:29 ` Janusz Krzysztofik [this message]
2022-03-31 18:29 ` Janusz Krzysztofik
2022-03-31 18:29 ` Janusz Krzysztofik
2022-03-10 23:33 ` [RFC PATCH 3/4] " Janusz Krzysztofik
2022-03-10 23:33 ` Janusz Krzysztofik
2022-03-10 23:33 ` [RFC RFT PATCH 4/4] ARM: OMAP1: clock: Convert " Janusz Krzysztofik
2022-03-10 23:33 ` Janusz Krzysztofik
2022-03-12 8:14 ` [RFC RFT PATCH 0/4] " Tony Lindgren
2022-03-12 8:14 ` Tony Lindgren
2022-03-19 18:49 ` Aaro Koskinen
2022-03-19 18:49 ` Aaro Koskinen
2022-03-19 21:21 ` Aaro Koskinen
2022-03-19 21:21 ` Aaro Koskinen
2022-03-20 0:15 ` Janusz Krzysztofik
2022-03-20 0:15 ` Janusz Krzysztofik
2022-03-21 8:01 ` Arnd Bergmann
2022-03-21 8:01 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3657229.kQq0lBPeGt@dell \
--to=jmkrzyszt@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=balbi@kernel.org \
--cc=broonie@kernel.org \
--cc=deller@gmx.de \
--cc=gregkh@linuxfoundation.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=peter.ujfalusi@gmail.com \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.