* Re: ksymoops [not found] <Pine.LNX.4.05.9812051203360.1133-100000@p04-08.hartford.dialin.ntplx.com> @ 1998-12-06 0:07 ` Tom Rini 1998-12-06 0:47 ` ksymoops Ryan Nielsen 1 sibling, 0 replies; 7+ messages in thread From: Tom Rini @ 1998-12-06 0:07 UTC (permalink / raw) To: linuxppc-dev On Sat, 5 Dec 1998, Tom Rini wrote: > Hello, > Has anyone played around with getting ksymoops working on PPC yet? > Would be a rather useful tool (gonna take a stab at it if not). nm. Found ksymmoops 0.6. On another note, anyone know why the patches in it for a more usaeable oops log aren't in vger/samba? --- Tom Rini (TR1265) http://dobbstown.yeti.edu/ [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ksymoops [not found] <Pine.LNX.4.05.9812051203360.1133-100000@p04-08.hartford.dialin.ntplx.com> 1998-12-06 0:07 ` ksymoops Tom Rini @ 1998-12-06 0:47 ` Ryan Nielsen 1998-12-06 0:53 ` ksymoops Tom Rini 1 sibling, 1 reply; 7+ messages in thread From: Ryan Nielsen @ 1998-12-06 0:47 UTC (permalink / raw) To: Tom Rini, linuxppc-dev > Hello, > Has anyone played around with getting ksymoops working on PPC yet? > Would be a rather useful tool (gonna take a stab at it if not). I assume you mean linux/scripts/ksymoops.cc, a package that does similar and works on PPC can be got from ftp://ftp.ocs.com.au/pub/ksymoops.tar.gz [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ksymoops 1998-12-06 0:47 ` ksymoops Ryan Nielsen @ 1998-12-06 0:53 ` Tom Rini 1998-12-06 1:48 ` ksymoops Ryan Nielsen 1998-12-06 18:59 ` mousemode Louis Kowolowski 0 siblings, 2 replies; 7+ messages in thread From: Tom Rini @ 1998-12-06 0:53 UTC (permalink / raw) To: Ryan Nielsen; +Cc: linuxppc-dev On Sat, 5 Dec 1998, Ryan Nielsen wrote: > > Hello, > > Has anyone played around with getting ksymoops working on PPC yet? > > Would be a rather useful tool (gonna take a stab at it if not). > > I assume you mean linux/scripts/ksymoops.cc, a package that does similar > and works on PPC can be got from ftp://ftp.ocs.com.au/pub/ksymoops.tar.gz Yeah, found that a bit later on. Ever pass on the patch for more detailed oops to Cort/Paul? --- Tom Rini (TR1265) http://dobbstown.yeti.edu/ [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ksymoops 1998-12-06 0:53 ` ksymoops Tom Rini @ 1998-12-06 1:48 ` Ryan Nielsen 1998-12-06 18:59 ` mousemode Louis Kowolowski 1 sibling, 0 replies; 7+ messages in thread From: Ryan Nielsen @ 1998-12-06 1:48 UTC (permalink / raw) To: Tom Rini; +Cc: linuxppc-dev, Cort Dougan, Paul Mackerras Tom Rini wrote: > On Sat, 5 Dec 1998, Ryan Nielsen wrote: > > > > Hello, > > > Has anyone played around with getting ksymoops working on PPC yet? > > > Would be a rather useful tool (gonna take a stab at it if not). > > > > I assume you mean linux/scripts/ksymoops.cc, a package that does similar > > and works on PPC can be got from ftp://ftp.ocs.com.au/pub/ksymoops.tar.gz > > Yeah, found that a bit later on. Ever pass on the patch for more detailed > oops to Cort/Paul? (CC'd to Cort and Paul) its the same Instruction DUMP from the sparc code. I've found it useful in finding out where modules fsck up. --- linux/arch/ppc/kernel/process.c 1998/10/11 17:47:23 1.67 +++ linux/arch/ppc/kernel/process.c 1998/11/02 03:11:28 @@ -198,6 +200,19 @@ _enable_interrupts(s); } +void instruction_dump (unsigned long *pc) +{ + int i; + + if((((unsigned long) pc) & 3)) + return; + + printk("Instruction DUMP:"); + for(i = -3; i < 6; i++) + printk("%c%08lx%c",i?' ':'<',pc[i],i?' ':'>'); + printk("\n"); +} + void show_regs(struct pt_regs * regs) { int i; --- linux/arch/ppc/kernel/traps.c 1998/05/05 19:18:53 1.21 +++ linux/arch/ppc/kernel/traps.c 1998/11/02 03:11:36 @@ -79,6 +79,7 @@ debugger(regs); #endif print_backtrace((unsigned long *)regs->gpr[1]); + instruction_dump((unsigned long *)regs->nip); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } force_sig(signr, current); @@ -126,6 +127,7 @@ debugger(regs); #endif print_backtrace((unsigned long *)regs->gpr[1]); + instruction_dump((unsigned long *)regs->nip); panic("machine check"); } _exception(SIGSEGV, regs); @@ -219,6 +221,7 @@ #endif show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); + instruction_dump((unsigned long *)regs->nip); panic("kernel stack overflow"); } --- linux/arch/ppc/mm/fault.c 1998/10/06 03:13:19 1.28 +++ linux/arch/ppc/mm/fault.c 1998/11/02 03:11:36 @@ -89,6 +89,7 @@ printk("page fault in interrupt handler, addr=%lx\n", address); show_regs(regs); + instruction_dump((unsigned long *)regs->nip); #if defined(CONFIG_XMON) || defined(CONFIG_KGDB) if (debugger_kernel_faults) debugger(regs); @@ -174,6 +175,7 @@ /* kernel has accessed a bad area */ show_regs(regs); print_backtrace( (unsigned long *)regs->gpr[1] ); + instruction_dump((unsigned long *)regs->nip); #if defined(CONFIG_XMON) || defined(CONFIG_KGDB) if (debugger_kernel_faults) debugger(regs); [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]] ^ permalink raw reply [flat|nested] 7+ messages in thread
* mousemode 1998-12-06 0:53 ` ksymoops Tom Rini 1998-12-06 1:48 ` ksymoops Ryan Nielsen @ 1998-12-06 18:59 ` Louis Kowolowski 1998-12-06 21:54 ` mousemode Hollis R Blanchard 1998-12-07 1:14 ` mousemode Mike DeSimone 1 sibling, 2 replies; 7+ messages in thread From: Louis Kowolowski @ 1998-12-06 18:59 UTC (permalink / raw) To: linuxppc-dev how do you change/force mousemode to a different setting? i've attempted to use mousemode 15 4 but it tells me that the current setting is 1, attempts to change it to 4, and leaves it at 1... any ideas? thanks L [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mousemode 1998-12-06 18:59 ` mousemode Louis Kowolowski @ 1998-12-06 21:54 ` Hollis R Blanchard 1998-12-07 1:14 ` mousemode Mike DeSimone 1 sibling, 0 replies; 7+ messages in thread From: Hollis R Blanchard @ 1998-12-06 21:54 UTC (permalink / raw) To: Louis Kowolowski; +Cc: linuxppc-dev On Sun, 6 Dec 1998, Louis Kowolowski wrote: > > how do you change/force mousemode to a different setting? > i've attempted to use mousemode 15 4 but it tells me that the current setting > is 1, attempts to change it to 4, and leaves it at 1... any ideas? > thanks Are you in root? With a multibutton mouse attached? I think there's a mousemode switch that lists all availible adb devices - you might want to check that. -Hollis [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mousemode 1998-12-06 18:59 ` mousemode Louis Kowolowski 1998-12-06 21:54 ` mousemode Hollis R Blanchard @ 1998-12-07 1:14 ` Mike DeSimone 1 sibling, 0 replies; 7+ messages in thread From: Mike DeSimone @ 1998-12-07 1:14 UTC (permalink / raw) To: Louis Kowolowski, linuxppc-dev >how do you change/force mousemode to a different setting? >i've attempted to use mousemode 15 4 but it tells me that the current setting >is 1, attempts to change it to 4, and leaves it at 1... any ideas? >thanks The first number is the ADB device ID. Try different ones (0-15) for it. I'd recommend starting at 14 and going down until you find a device that changes. _________________________________________________________________________ __________ ## ## ### ##### ##### \********/ ##### ### ##### ###### ### ### ## ## ## ## ## \*/\/\*/ ## ## ## ## ## ## ####### ## ## ##### #### /\/\ ##### ## ## #### #### ## # ## ####### ## ## ## \**/ ## ## ####### ## ## ## ## ## ## ## ## ##### \/ ##### ## ## ##### ###### _________________________________________________________________________ ### Mike DeSimone ### Hot-Wire@mail.utexas.edu ### ares.marsbase.mars ### [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~1998-12-07 1:14 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <Pine.LNX.4.05.9812051203360.1133-100000@p04-08.hartford.dialin.ntplx.com>
1998-12-06 0:07 ` ksymoops Tom Rini
1998-12-06 0:47 ` ksymoops Ryan Nielsen
1998-12-06 0:53 ` ksymoops Tom Rini
1998-12-06 1:48 ` ksymoops Ryan Nielsen
1998-12-06 18:59 ` mousemode Louis Kowolowski
1998-12-06 21:54 ` mousemode Hollis R Blanchard
1998-12-07 1:14 ` mousemode Mike DeSimone
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.