[PATCH 3/3] media: atmel-isi: remove mck back compatiable code as we don't need it

[laurent.pinchart@ideasonboard.com (Laurent Pinchart)]

Hi Josh,

Thank you for the patch.

On Thursday 05 March 2015 13:01:01 Josh Wu wrote:
> The master clock should handled by sensor itself.

I like that :-)

> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> ---
> 
>  drivers/media/platform/soc_camera/atmel-isi.c | 32 ------------------------
>  1 file changed, 32 deletions(-)
> 
> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
> b/drivers/media/platform/soc_camera/atmel-isi.c index 4a384f1..50375ce
> 100644
> --- a/drivers/media/platform/soc_camera/atmel-isi.c
> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
> @@ -83,8 +83,6 @@ struct atmel_isi {
>  	struct completion		complete;
>  	/* ISI peripherial clock */
>  	struct clk			*pclk;
> -	/* ISI_MCK, feed to camera sensor to generate pixel clock */
> -	struct clk			*mck;
>  	unsigned int			irq;
> 
>  	struct isi_platform_data	pdata;
> @@ -725,26 +723,12 @@ static void isi_camera_remove_device(struct
> soc_camera_device *icd) /* Called with .host_lock held */
>  static int isi_camera_clock_start(struct soc_camera_host *ici)
>  {
> -	struct atmel_isi *isi = ici->priv;
> -	int ret;
> -
> -	if (!IS_ERR(isi->mck)) {
> -		ret = clk_prepare_enable(isi->mck);
> -		if (ret) {
> -			return ret;
> -		}
> -	}
> -
>  	return 0;

Would it make sense to make the clock_start and clock_stop operations optional 
in the soc-camera core ?

>  }
> 
>  /* Called with .host_lock held */
>  static void isi_camera_clock_stop(struct soc_camera_host *ici)
>  {
> -	struct atmel_isi *isi = ici->priv;
> -
> -	if (!IS_ERR(isi->mck))
> -		clk_disable_unprepare(isi->mck);
>  }
> 
>  static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
> @@ -894,7 +878,6 @@ static int atmel_isi_probe_dt(struct atmel_isi *isi,
> 
>  	/* Default settings for ISI */
>  	isi->pdata.full_mode = 1;
> -	isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
>  	isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
> 
>  	np = of_graph_get_next_endpoint(np, NULL);
> @@ -970,21 +953,6 @@ static int atmel_isi_probe(struct platform_device
> *pdev) INIT_LIST_HEAD(&isi->video_buffer_list);
>  	INIT_LIST_HEAD(&isi->dma_desc_head);
> 
> -	/* ISI_MCK is the sensor master clock. It should be handled by the
> -	 * sensor driver directly, as the ISI has no use for that clock. Make
> -	 * the clock optional here while platforms transition to the correct
> -	 * model.
> -	 */
> -	isi->mck = devm_clk_get(dev, "isi_mck");
> -	if (!IS_ERR(isi->mck)) {
> -		/* Set ISI_MCK's frequency, it should be faster than pixel
> -		 * clock.
> -		 */
> -		ret = clk_set_rate(isi->mck, isi->pdata.mck_hz);
> -		if (ret < 0)
> -			return ret;
> -	}
> -
>  	isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
>  				sizeof(struct fbd) * MAX_BUFFER_NUM,
>  				&isi->fb_descriptors_phys,

-- 
Regards,

Laurent Pinchart