From: "D. Lance Robinson" <lancer@airways.com>
To: Geert Uytterhoeven <geert@sonycom.com>
Cc: Linux/PPC Development <linuxppc-dev@lists.linuxppc.org>
Subject: Re: Sym53c8xx in 2.3.now
Date: Wed, 01 Sep 1999 13:35:56 -0700 [thread overview]
Message-ID: <37CD8E2C.60E670CF@airways.com> (raw)
In-Reply-To: Pine.GSO.4.10.9909011709520.5612-100000@oleander.sonytel.be
Geert,
You should post your message on the linux-scsi list server. Gerard, who
wrote the driver listens in on that list.
send to linux-scsi@vger.rutgers.edu
<>< Lance.
Geert Uytterhoeven wrote:
>
> Anybody who has the sym53c8xx or ncr53c8xx driver working with the latest 2.3.x kernels?
>
> I get:
>
> | sym53c8xx: at PCI bus 0, device 6, function 0
> | sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
> | sym53c8xx: setting PCI_COMMAND_MASTER PCI_COMMAND_PARITY...(fix-up)
> | sym53c8xx: 53c875 detected
> | sym53c875-0: rev=0x04, base=0xc3000000, io_port=0x1400, irq=31
> | sym53c875-0: NCR clock is 40218KHz, 40218KHz
> | sym53c875-0: ID 7, Fast-20, Parity Checking
> | sym53c875-0: on-chip RAM at 0xc3001000
> | sym53c875-0: restart (scsi reset).
> | sym53c875-0: Downloading SCSI SCRIPTS.
> | ncr53c8xx: at PCI bus 0, device 6, function 0
> | ncr53c8xx: IO region 0x1400 to 0x147f is in use
> | mesh: assuming 50MHz clock frequency
> | scsi0 : sym53c8xx - version 1.3c
> | scsi1 : MESH
> | scsi : 2 hosts.
> | scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
> | sym53c8xx_abort: pid=0 serial_number=1 serial_number_at_timeout=1
>
> And then the system hangs in a wait loop...
>
> My devices (from 2.3.6 dmesg):
>
> | Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 3506
> | Type: Direct-Access ANSI SCSI revision: 02
> | Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
> | Vendor: PLEXTOR Model: CD-ROM PX-12TS Rev: 1.02
> | Type: CD-ROM ANSI SCSI revision: 02
> | Vendor: HP Model: HP35480A Rev: T503
> | Type: Sequential-Access ANSI SCSI revision: 02
> | sym53c875-0-<0,0>: tagged command queue depth set to 8
> | Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
> | Type: Direct-Access ANSI SCSI revision: 02
> | Detected scsi disk sdb at scsi1, channel 0, id 5, lun 0
> | scsi : detected 2 SCSI disks total.
> | sym53c875-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
> | SCSI device sda: hdwr sector= 512 bytes. Sectors= 8910423 [4350 MB] [4.4 GB]
> | SCSI device sdb: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB]
>
> Disabling sym53c8xx and using ncr53c8xx instead doesn't fix the problem.
>
> Greetings,
>
> Geert
>
> --
> Geert Uytterhoeven Geert.Uytterhoeven@sonycom.com
> Sony Suprastructure Center Europe (SUPC-E) --- Brussels --- Belgium
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
next prev parent reply other threads:[~1999-09-01 20:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-09-01 15:16 Sym53c8xx in 2.3.now Geert Uytterhoeven
1999-09-01 20:35 ` D. Lance Robinson [this message]
1999-09-01 22:00 ` Geert Uytterhoeven
1999-09-05 21:12 ` vger on LongTrail (was: Re: Sym53c8xx in 2.3.now) Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=37CD8E2C.60E670CF@airways.com \
--to=lancer@airways.com \
--cc=geert@sonycom.com \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.