From: Fengguang Wu <fengguang.wu@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>,
Jens Axboe <jens.axboe@oracle.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Eric Dumazet <dada1@cosmosbay.com>,
linux-kernel@vger.kernel.org, cotte@de.ibm.com, hugh@veritas.com,
neilb@suse.de, zanussi@us.ibm.com, hch@infradead.org
Subject: Re: [PATCH] sendfile removal
Date: Sun, 3 Jun 2007 22:29:31 +0800 [thread overview]
Message-ID: <380880969.15000@ustc.edu.cn> (raw)
Message-ID: <20070603142931.GA5916@mail.ustc.edu.cn> (raw)
In-Reply-To: <20070603130507.GA11170@mail.ustc.edu.cn>
On Sun, Jun 03, 2007 at 09:05:08PM +0800, Fengguang Wu wrote:
> In non-block splicing, return EAGAIN once for all possible I/O waits.
>
> It works by checking (ra.prev_index != index) in
> __generic_file_splice_read(). Another reader on the same fd will at
> worst cause a few more splice syscalls.
>
> If keep calling generic_file_splice_read() in non-block mode, it will
> return partial data before the first hole; then return EAGAIN at
> second call; at last it will block on the I/O page.
Here is a better one, comments are welcome.
---
In non-block splicing read, return EAGAIN once for all possible I/O waits.
It avoids busy waiting by checking (ra.prev_index != index) in
__generic_file_splice_read(). Possible other readers on the same fd
may temporarily cheat the logic, but will at worst cause a few more
splice syscalls.
If keep calling generic_file_splice_read() in non-blocking mode, it
will return partial data before the first wait point; then return
EAGAIN at second call; at last it will block on the I/O page. This
behavior should be compatible with old apps that are unaware of
EAGAIN.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
---
fs/splice.c | 33 ++++++++++++++++++---------------
include/linux/pipe_fs_i.h | 2 ++
2 files changed, 20 insertions(+), 15 deletions(-)
--- linux-2.6.22-rc3-mm1.orig/fs/splice.c
+++ linux-2.6.22-rc3-mm1/fs/splice.c
@@ -264,7 +264,7 @@ static ssize_t splice_to_pipe(struct pip
static int
__generic_file_splice_read(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe, size_t len,
- unsigned int flags)
+ unsigned int *flags)
{
struct address_space *mapping = in->f_mapping;
unsigned int loff, nr_pages;
@@ -278,7 +278,7 @@ __generic_file_splice_read(struct file *
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
- .flags = flags,
+ .flags = *flags,
.ops = &page_cache_pipe_buf_ops,
};
@@ -299,12 +299,16 @@ __generic_file_splice_read(struct file *
* Lookup the (hopefully) full range of pages we need.
*/
spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages);
+ index += spd.nr_pages;
/*
* If find_get_pages_contig() returned fewer pages than we needed,
- * allocate the rest.
+ * readahead/allocate the rest.
*/
- index += spd.nr_pages;
+ if (spd.nr_pages < nr_pages)
+ page_cache_readahead_ondemand(mapping, &in->f_ra, in,
+ NULL, index, nr_pages - spd.nr_pages);
+
while (spd.nr_pages < nr_pages) {
/*
* Page could be there, find_get_pages_contig() breaks on
@@ -312,9 +316,6 @@ __generic_file_splice_read(struct file *
*/
page = find_get_page(mapping, index);
if (!page) {
- page_cache_readahead_ondemand(mapping, &in->f_ra, in,
- NULL, index, nr_pages - spd.nr_pages);
-
/*
* page didn't exist, allocate one.
*/
@@ -326,8 +327,6 @@ __generic_file_splice_read(struct file *
GFP_KERNEL);
if (unlikely(error)) {
page_cache_release(page);
- if (error == -EEXIST)
- continue;
break;
}
/*
@@ -369,12 +368,13 @@ __generic_file_splice_read(struct file *
*/
if (!PageUptodate(page)) {
/*
- * If in nonblock mode then dont block on waiting
- * for an in-flight io page
+ * In non-block mode, only block at the second try.
*/
- if (flags & SPLICE_F_NONBLOCK) {
- if (TestSetPageLocked(page))
- break;
+ if ((*flags & SPLICE_F_NONBLOCK) &&
+ TestSetPageLocked(page) &&
+ in->f_ra.prev_index != index) {
+ *flags |= SPLICE_INTERNAL_WILLBLOCK;
+ break;
} else
lock_page(page);
@@ -480,7 +480,7 @@ ssize_t generic_file_splice_read(struct
spliced = 0;
while (len) {
- ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
+ ret = __generic_file_splice_read(in, ppos, pipe, len, &flags);
if (ret < 0)
break;
@@ -496,6 +496,9 @@ ssize_t generic_file_splice_read(struct
*ppos += ret;
len -= ret;
spliced += ret;
+
+ if (flags & SPLICE_INTERNAL_WILLBLOCK)
+ break;
}
if (spliced)
--- linux-2.6.22-rc3-mm1.orig/include/linux/pipe_fs_i.h
+++ linux-2.6.22-rc3-mm1/include/linux/pipe_fs_i.h
@@ -82,6 +82,8 @@ int generic_pipe_buf_steal(struct pipe_i
#define SPLICE_F_MORE (0x04) /* expect more data */
#define SPLICE_F_GIFT (0x08) /* pages passed in are a gift */
+#define SPLICE_INTERNAL_WILLBLOCK (0x100) /* read on next page will block */
+
/*
* Passed to the actors
*/
next prev parent reply other threads:[~2007-06-03 14:29 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-31 10:33 [PATCH] sendfile removal Jens Axboe
2007-05-31 10:47 ` Jens Axboe
2007-05-31 10:47 ` Eric Dumazet
2007-05-31 10:53 ` Jens Axboe
2007-06-01 4:09 ` H. Peter Anvin
2007-06-01 5:41 ` Jens Axboe
2007-06-01 5:50 ` H. Peter Anvin
2007-06-01 7:22 ` Eric Dumazet
2007-06-01 15:52 ` H. Peter Anvin
2007-06-01 16:18 ` Linus Torvalds
2007-06-01 16:47 ` Eric Dumazet
2007-06-01 16:53 ` H. Peter Anvin
2007-06-02 15:02 ` Jens Axboe
2007-06-02 15:01 ` Jens Axboe
2007-06-02 15:40 ` Linus Torvalds
2007-06-02 16:35 ` Jens Axboe
2007-06-03 13:05 ` Fengguang Wu
2007-06-03 13:05 ` Fengguang Wu
2007-06-03 14:29 ` Fengguang Wu [this message]
2007-06-03 14:29 ` Fengguang Wu
2007-06-04 0:46 ` Fengguang Wu
2007-06-04 0:46 ` Fengguang Wu
2007-06-04 8:05 ` Jens Axboe
2007-06-04 11:22 ` Fengguang Wu
2007-06-04 11:22 ` Fengguang Wu
2007-06-01 16:22 ` Pádraig Brady
2007-05-31 10:55 ` Christoph Hellwig
2007-05-31 11:05 ` Jens Axboe
2007-05-31 12:26 ` Neil Brown
2007-05-31 12:27 ` Jens Axboe
2007-06-01 2:44 ` [PATCH] sendfile removal (nfsd update) Neil Brown
2007-06-01 5:44 ` Jens Axboe
2007-06-01 8:01 ` Jens Axboe
2007-06-01 8:15 ` [PATCH] sendfile removal Jens Axboe
2007-05-31 11:04 ` Carsten Otte
2007-05-31 11:06 ` Jens Axboe
2007-05-31 15:33 ` Tom Zanussi
2007-05-31 19:01 ` Jens Axboe
2007-05-31 17:06 ` Hugh Dickins
2007-05-31 17:31 ` Christoph Hellwig
2007-05-31 19:03 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=380880969.15000@ustc.edu.cn \
--to=fengguang.wu@gmail.com \
--cc=cotte@de.ibm.com \
--cc=dada1@cosmosbay.com \
--cc=hch@infradead.org \
--cc=hpa@zytor.com \
--cc=hugh@veritas.com \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
--cc=torvalds@linux-foundation.org \
--cc=zanussi@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.