Re: [PATCH 2/4 v2] drm/bridge: adv7511: Add Audio support.

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi John,

Thank you for the patch.

On Monday 29 Aug 2016 16:41:34 John Stultz wrote:
> This patch adds support to Audio for both adv7511 and adv7533
> bridge chips.
> 
> This patch was originally from [1] by Lars-Peter Clausen <lars@metafoo.de>
> and was adapted by Archit Taneja <architt@codeaurora.org> and
> Srinivas Kandagatla <srinivas.kandagatla@linaro.org>.
> 
> Then I heavily reworked it to use the hdmi-codec driver. So credit
> to them, but blame to me.
> 
> [1]
> https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/gpu/drm/i
> 2c/adv7511_audio.c
> 
> Cc: David Airlie <airlied@linux.ie>
> Cc: Archit Taneja <architt@codeaurora.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
> Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
> Cc: Andy Green <andy@warmcat.com>
> Cc: Dave Long <dave.long@linaro.org>
> Cc: Guodong Xu <guodong.xu@linaro.org>
> Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Jose Abreu <joabreu@synopsys.com>
> Cc: dri-devel@lists.freedesktop.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> v2: Integrated feedback from Srinivas
> 
>  drivers/gpu/drm/bridge/adv7511/Kconfig         |   1 +
>  drivers/gpu/drm/bridge/adv7511/Makefile        |   2 +-
>  drivers/gpu/drm/bridge/adv7511/adv7511.h       |   5 +
>  drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 199 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c   |   5 +
>  5 files changed, 211 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig
> b/drivers/gpu/drm/bridge/adv7511/Kconfig index d2b0499..e3975e9 100644
> --- a/drivers/gpu/drm/bridge/adv7511/Kconfig
> +++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
> @@ -3,6 +3,7 @@ config DRM_I2C_ADV7511
>  	depends on OF
>  	select DRM_KMS_HELPER
>  	select REGMAP_I2C
> +	select SND_SOC_HDMI_CODEC if SND_SOC

Shouldn't sound support be optional ? I can imagine a board that doesn't wire 
up sound to the ADV7511 but still uses SND_SOC for other purposes.

>  	help
>  	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/Makefile
> b/drivers/gpu/drm/bridge/adv7511/Makefile index 9019327..ad7245d 100644
> --- a/drivers/gpu/drm/bridge/adv7511/Makefile
> +++ b/drivers/gpu/drm/bridge/adv7511/Makefile
> @@ -1,3 +1,3 @@
> -adv7511-y := adv7511_drv.o
> +adv7511-y := adv7511_drv.o adv7511_audio.o

Could we avoid compiling adv7511_audio.o if sound support isn't desired to 
avoid bloating the kernel ?

>  adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
>  obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> b/drivers/gpu/drm/bridge/adv7511/adv7511.h index c7002a0..2e4d340 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -23,6 +23,8 @@ struct adv7511;
> 
>  int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet);
>  int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet);
> +int adv7511_audio_init(struct device *dev);
> +void adv7511_audio_exit(struct device *dev);
> 
>  #define ADV7511_REG_CHIP_REVISION		0x00
>  #define ADV7511_REG_N0				0x01
> @@ -317,6 +319,8 @@ struct adv7511 {
>  	struct drm_display_mode curr_mode;
> 
>  	unsigned int f_tmds;
> +	unsigned int f_audio;
> +	unsigned int audio_source;
> 
>  	unsigned int current_edid_segment;
>  	uint8_t edid_buf[256];
> @@ -342,6 +346,7 @@ struct adv7511 {
>  	bool use_timing_gen;
> 
>  	enum adv7511_type type;
> +	struct platform_device *audio_pdev;
>  };
> 
>  #ifdef CONFIG_DRM_I2C_ADV7533
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c new file mode 100644
> index 0000000..0e0ea6b
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
> @@ -0,0 +1,199 @@
> +/*
> + * Analog Devices ADV7511 HDMI transmitter driver
> + *
> + * Copyright 2012 Analog Devices Inc.
> + * Copyright (c) 2016, Linaro Limited
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <sound/core.h>
> +#include <sound/hdmi-codec.h>
> +#include <sound/pcm.h>
> +#include <sound/soc.h>
> +
> +#include "adv7511.h"
> +
> +static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
> +			       unsigned int *cts, unsigned int *n)
> +{
> +	switch (fs) {
> +	case 32000:
> +		*n = 4096;
> +		break;
> +	case 44100:
> +		*n = 6272;
> +		break;
> +	case 48000:
> +		*n = 6144;
> +		break;
> +	}
> +
> +	*cts = ((f_tmds * *n) / (128 * fs)) * 1000;
> +}
> +
> +static int adv7511_update_cts_n(struct adv7511 *adv7511)
> +{
> +	unsigned int cts = 0;
> +	unsigned int n = 0;
> +
> +	adv7511_calc_cts_n(adv7511->f_tmds, adv7511->f_audio, &cts, &n);
> +
> +	regmap_write(adv7511->regmap, ADV7511_REG_N0, (n >> 16) & 0xf);
> +	regmap_write(adv7511->regmap, ADV7511_REG_N1, (n >> 8) & 0xff);
> +	regmap_write(adv7511->regmap, ADV7511_REG_N2, n & 0xff);
> +
> +	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL0,
> +		     (cts >> 16) & 0xf);
> +	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL1,
> +		     (cts >> 8) & 0xff);
> +	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL2,
> +		     cts & 0xff);
> +
> +	return 0;
> +}
> +
> +int adv7511_hdmi_hw_params(struct device *dev, void *data,
> +				struct hdmi_codec_daifmt *fmt,
> +				struct hdmi_codec_params *hparms)
> +{
> +	struct adv7511 *adv7511 = dev_get_drvdata(dev);
> +	unsigned int audio_source, i2s_format = 0;
> +	unsigned int invert_clock;
> +	unsigned int rate;
> +	unsigned int len;
> +
> +	switch (hparms->sample_rate) {
> +	case 32000:
> +		rate = ADV7511_SAMPLE_FREQ_32000;
> +		break;
> +	case 44100:
> +		rate = ADV7511_SAMPLE_FREQ_44100;
> +		break;
> +	case 48000:
> +		rate = ADV7511_SAMPLE_FREQ_48000;
> +		break;
> +	case 88200:
> +		rate = ADV7511_SAMPLE_FREQ_88200;
> +		break;
> +	case 96000:
> +		rate = ADV7511_SAMPLE_FREQ_96000;
> +		break;
> +	case 176400:
> +		rate = ADV7511_SAMPLE_FREQ_176400;
> +		break;
> +	case 192000:
> +		rate = ADV7511_SAMPLE_FREQ_192000;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	switch (hparms->sample_width) {
> +	case 16:
> +		len = ADV7511_I2S_SAMPLE_LEN_16;
> +		break;
> +	case 18:
> +		len = ADV7511_I2S_SAMPLE_LEN_18;
> +		break;
> +	case 20:
> +		len = ADV7511_I2S_SAMPLE_LEN_20;
> +		break;
> +	case 24:
> +		len = ADV7511_I2S_SAMPLE_LEN_24;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	switch (fmt->fmt) {
> +	case HDMI_I2S:
> +		audio_source = ADV7511_AUDIO_SOURCE_I2S;
> +		i2s_format = ADV7511_I2S_FORMAT_I2S;
> +		break;
> +	case HDMI_RIGHT_J:
> +		audio_source = ADV7511_AUDIO_SOURCE_I2S;
> +		i2s_format = ADV7511_I2S_FORMAT_RIGHT_J;
> +		break;
> +	case HDMI_LEFT_J:
> +		audio_source = ADV7511_AUDIO_SOURCE_I2S;
> +		i2s_format = ADV7511_I2S_FORMAT_LEFT_J;
> +		break;
> +//	case HDMI_SPDIF:
> +//		audio_source = ADV7511_AUDIO_SOURCE_SPDIF;
> +//		break;

No commented out code please.

> +	default:
> +		return -EINVAL;
> +	}
> +
> +	invert_clock = fmt->bit_clk_inv;
> +
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_SOURCE, 0x70,
> +			   audio_source << 4);
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, BIT(6),
> +			   invert_clock << 6);
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2S_CONFIG, 0x03,
> +			   i2s_format);
> +
> +	adv7511->audio_source = audio_source;
> +
> +	adv7511->f_audio = hparms->sample_rate;
> +
> +	adv7511_update_cts_n(adv7511);
> +
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG3,
> +			   ADV7511_AUDIO_CFG3_LEN_MASK, len);
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
> +			   ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
> +	regmap_write(adv7511->regmap, 0x73, 0x1);
> +
> +	return 0;
> +}
> +
> +static int audio_startup(struct device *dev, void *data)
> +{
> +	struct adv7511 *adv7511 = dev_get_drvdata(dev);
> +
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
> +				BIT(7), 0);
> +	return 0;
> +}
> +
> +static void audio_shutdown(struct device *dev, void *data)
> +{
> +

No need for a blank line.

> +}
> +
> +static const struct hdmi_codec_ops adv7511_codec_ops = {
> +	.hw_params	= adv7511_hdmi_hw_params,
> +	.audio_shutdown = audio_shutdown,
> +	.audio_startup	= audio_startup,
> +};
> +
> +static struct hdmi_codec_pdata codec_data = {
> +	.ops = &adv7511_codec_ops,
> +	.max_i2s_channels = 2,
> +	.i2s = 1,
> +};
> +
> +int adv7511_audio_init(struct device *dev)
> +{
> +	struct adv7511 *adv7511 = dev_get_drvdata(dev);

Why don't you pass the struct adv7511 pointer directly to this function ?

> +	adv7511->audio_pdev = platform_device_register_data(dev,
> +					HDMI_CODEC_DRV_NAME,
> +					PLATFORM_DEVID_AUTO,
> +					&codec_data,
> +					sizeof(codec_data));
> +	return PTR_ERR_OR_ZERO(adv7511->audio_pdev);
> +}
> +
> +void adv7511_audio_exit(struct device *dev)
> +{
> +	struct adv7511 *adv7511 = dev_get_drvdata(dev);

Same here.

> +
> +	if (adv7511->audio_pdev) {
> +		platform_device_unregister(adv7511->audio_pdev);
> +		adv7511->audio_pdev = NULL;
> +	}
> +}
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index f8eb7f8..3756994
> 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1037,6 +1037,9 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) goto err_unregister_cec;
>  	}
> 
> +	dev_set_drvdata(dev, adv7511);

This is already handled by the i2c_set_clientdata() call earlier in this 
function.

> +	adv7511_audio_init(dev);
> +
>  	return 0;
> 
>  err_unregister_cec:
> @@ -1058,6 +1061,8 @@ static int adv7511_remove(struct i2c_client *i2c)
> 
>  	drm_bridge_remove(&adv7511->bridge);
> 
> +	adv7511_audio_exit(&i2c->dev);
> +
>  	i2c_unregister_device(adv7511->i2c_edid);
> 
>  	kfree(adv7511->edid);

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel