Re: [PATCH v2 1/4] arm64: dts: qcom: shikra: Add MDSS display subsystem

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 7/6/26 8:04 AM, Nabige Aala wrote:
> Add the SoC-level display subsystem nodes for Qualcomm Shikra:
> MDSS wrapper,DPU display controller, DSI host controller, and
> 14nm DSI PHY.
> 
> Qualcomm Shikra uses DPU 6.5 hardware (same as QCM2290). Platform-specific
> compatible strings are used as the primary match with QCM2290 fallbacks
> to reuse the existing driver support.
> 
> The dispcc clock inputs for the DSI byte and pixel PLLs are wired
> from mdss_dsi0_phy.
> 
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
> ---

[...]

> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						dpu_intf1_out: endpoint {

Please keep a \n between the last property and the following
subnodes

otherwise lgtm

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
 
Konrad