From: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
To: Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org,
geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org
Subject: Re: [PATCH v6 05/07] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
Date: Fri, 11 Nov 2016 03:24:43 +0200 [thread overview]
Message-ID: <3935390.6f0iEMmRcF@avalon> (raw)
In-Reply-To: <20161019233623.10506.49016.sendpatchset@little-apple>
Hi Magnus,
Thank you for the patch.
On Thursday 20 Oct 2016 08:36:23 Magnus Damm wrote:
> From: Magnus Damm <damm+renesas-yzvPICuk2ACczHhG9Qg4qA@public.gmane.org>
>
> Introduce an alternative set of iommu_ops suitable for 64-bit ARM
> as well as 32-bit ARM when CONFIG_IOMMU_DMA=y. Also adjust the
> Kconfig to depend on ARM or IOMMU_DMA.
>
> Signed-off-by: Magnus Damm <damm+renesas-yzvPICuk2ACczHhG9Qg4qA@public.gmane.org>
> ---
>
> Changes since V5:
> - Made domain allocation/free code more consistent - thanks Joerg!
>
> Changes since V4:
> - Added Kconfig hunk to depend on ARM or IOMMU_DMA
>
> Changes since V3:
> - Removed group parameter from ipmmu_init_platform_device()
>
> Changes since V2:
> - Included this new patch from the following series:
> [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update
> - Use only a single iommu_ops structure with #ifdef CONFIG_IOMMU_DMA
> - Folded in #ifdefs to handle CONFIG_ARM and CONFIG_IOMMU_DMA
> - of_xlate() is now used without #ifdefs
> - Made sure code compiles on both 32-bit and 64-bit ARM.
>
> drivers/iommu/Kconfig | 1
> drivers/iommu/ipmmu-vmsa.c | 122 ++++++++++++++++++++++++++++++++++++++---
> 2 files changed, 115 insertions(+), 8 deletions(-)
>
> --- 0001/drivers/iommu/Kconfig
> +++ work/drivers/iommu/Kconfig 2016-10-20 08:16:40.980607110 +0900
> @@ -274,6 +274,7 @@ config EXYNOS_IOMMU_DEBUG
>
> config IPMMU_VMSA
> bool "Renesas VMSA-compatible IPMMU"
> + depends on ARM || IOMMU_DMA
> depends on ARM_LPAE
> depends on ARCH_RENESAS || COMPILE_TEST
> select IOMMU_API
> --- 0006/drivers/iommu/ipmmu-vmsa.c
> +++ work/drivers/iommu/ipmmu-vmsa.c 2016-10-20 08:16:48.440607110 +0900
> @@ -10,6 +10,7 @@
>
> #include <linux/bitmap.h>
> #include <linux/delay.h>
> +#include <linux/dma-iommu.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> #include <linux/export.h>
> @@ -22,8 +23,10 @@
> #include <linux/sizes.h>
> #include <linux/slab.h>
>
> +#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
> #include <asm/dma-iommu.h>
> #include <asm/pgalloc.h>
> +#endif
>
> #include "io-pgtable.h"
>
> @@ -520,14 +523,6 @@ static struct iommu_domain *__ipmmu_doma
> return &domain->io_domain;
> }
>
> -static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
> -{
> - if (type != IOMMU_DOMAIN_UNMANAGED)
> - return NULL;
> -
> - return __ipmmu_domain_alloc(type);
> -}
> -
> static void ipmmu_domain_free(struct iommu_domain *io_domain)
> {
> struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain);
> @@ -714,6 +709,8 @@ error:
> return ret;
> }
>
> +#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
> +
> static int ipmmu_add_device(struct device *dev)
> {
> struct ipmmu_vmsa_archdata *archdata;
> @@ -807,6 +804,14 @@ static void ipmmu_remove_device(struct d
> dev->archdata.iommu = NULL;
> }
>
> +static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
> +{
> + if (type != IOMMU_DOMAIN_UNMANAGED)
> + return NULL;
> +
> + return __ipmmu_domain_alloc(type);
> +}
> +
> static const struct iommu_ops ipmmu_ops = {
> .domain_alloc = ipmmu_domain_alloc,
> .domain_free = ipmmu_domain_free,
> @@ -821,6 +826,105 @@ static const struct iommu_ops ipmmu_ops
> .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
> };
>
> +#endif /* !CONFIG_ARM && CONFIG_IOMMU_DMA */
> +
> +#ifdef CONFIG_IOMMU_DMA
> +
> +static struct iommu_domain *ipmmu_domain_alloc_dma(unsigned type)
> +{
> + struct iommu_domain *io_domain = NULL;
> +
> + switch (type) {
> + case IOMMU_DOMAIN_UNMANAGED:
> + io_domain = __ipmmu_domain_alloc(type);
> + break;
> +
> + case IOMMU_DOMAIN_DMA:
> + io_domain = __ipmmu_domain_alloc(type);
> + if (io_domain)
> + iommu_get_dma_cookie(io_domain);
> + break;
> + }
> +
> + return io_domain;
> +}
> +
> +static void ipmmu_domain_free_dma(struct iommu_domain *io_domain)
> +{
> + switch (io_domain->type) {
> + case IOMMU_DOMAIN_DMA:
> + iommu_put_dma_cookie(io_domain);
> + /* fall-through */
> + default:
> + ipmmu_domain_free(io_domain);
> + break;
> + }
> +}
> +
> +static int ipmmu_add_device_dma(struct device *dev)
> +{
> + struct iommu_group *group;
> +
> + /* only accept devices with iommus property */
Nitpicking, comments in the driver are capitalized and end with a period.
> + if (of_count_phandle_with_args(dev->of_node, "iommus",
> + "#iommu-cells") < 0)
> + return -ENODEV;
> +
> + group = iommu_group_get_for_dev(dev);
> + if (IS_ERR(group))
> + return PTR_ERR(group);
> +
> + return 0;
> +}
> +
> +static void ipmmu_remove_device_dma(struct device *dev)
> +{
> + iommu_group_remove_device(dev);
> +}
> +
> +static struct iommu_group *ipmmu_device_group_dma(struct device *dev)
> +{
> + struct iommu_group *group;
> + int ret;
> +
> + group = generic_device_group(dev);
> + if (IS_ERR(group))
> + return group;
> +
> + ret = ipmmu_init_platform_device(dev);
> + if (ret) {
> + iommu_group_put(group);
> + group = ERR_PTR(ret);
> + }
> +
> + return group;
> +}
> +
> +static int ipmmu_of_xlate_dma(struct device *dev,
> + struct of_phandle_args *spec)
> +{
> + /* dummy callback to satisfy of_iommu_configure() */
This is actually where you should parse the utlbs. If you switch to the
iommu_fwspec API as Robin proposed in his review of patch 6/7, I think you can
use iommu_fwspec_add_ids() as a helper function for this. See the arm-smmu-v3
driver for an example.
> + return 0;
> +}
> +
> +static const struct iommu_ops ipmmu_ops = {
> + .domain_alloc = ipmmu_domain_alloc_dma,
> + .domain_free = ipmmu_domain_free_dma,
> + .attach_dev = ipmmu_attach_device,
> + .detach_dev = ipmmu_detach_device,
> + .map = ipmmu_map,
> + .unmap = ipmmu_unmap,
> + .map_sg = default_iommu_map_sg,
> + .iova_to_phys = ipmmu_iova_to_phys,
> + .add_device = ipmmu_add_device_dma,
> + .remove_device = ipmmu_remove_device_dma,
> + .device_group = ipmmu_device_group_dma,
> + .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
> + .of_xlate = ipmmu_of_xlate_dma,
The ARM implementation should switch to .of_xlate() too. Have you given it a
try by any chance ?
> +};
> +
> +#endif /* CONFIG_IOMMU_DMA */
> +
> /* ------------------------------------------------------------------------
> * Probe/remove and init
> */
> @@ -910,7 +1014,9 @@ static int ipmmu_remove(struct platform_
> list_del(&mmu->list);
> spin_unlock(&ipmmu_devices_lock);
>
> +#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
> arm_iommu_release_mapping(mmu->mapping);
> +#endif
>
> ipmmu_device_reset(mmu);
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: iommu@lists.linux-foundation.org,
laurent.pinchart+renesas@ideasonboard.com,
geert+renesas@glider.be, joro@8bytes.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
horms+renesas@verge.net.au, robin.murphy@arm.com,
m.szyprowski@samsung.com
Subject: Re: [PATCH v6 05/07] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
Date: Fri, 11 Nov 2016 03:24:43 +0200 [thread overview]
Message-ID: <3935390.6f0iEMmRcF@avalon> (raw)
In-Reply-To: <20161019233623.10506.49016.sendpatchset@little-apple>
Hi Magnus,
Thank you for the patch.
On Thursday 20 Oct 2016 08:36:23 Magnus Damm wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Introduce an alternative set of iommu_ops suitable for 64-bit ARM
> as well as 32-bit ARM when CONFIG_IOMMU_DMA=y. Also adjust the
> Kconfig to depend on ARM or IOMMU_DMA.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> ---
>
> Changes since V5:
> - Made domain allocation/free code more consistent - thanks Joerg!
>
> Changes since V4:
> - Added Kconfig hunk to depend on ARM or IOMMU_DMA
>
> Changes since V3:
> - Removed group parameter from ipmmu_init_platform_device()
>
> Changes since V2:
> - Included this new patch from the following series:
> [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update
> - Use only a single iommu_ops structure with #ifdef CONFIG_IOMMU_DMA
> - Folded in #ifdefs to handle CONFIG_ARM and CONFIG_IOMMU_DMA
> - of_xlate() is now used without #ifdefs
> - Made sure code compiles on both 32-bit and 64-bit ARM.
>
> drivers/iommu/Kconfig | 1
> drivers/iommu/ipmmu-vmsa.c | 122 ++++++++++++++++++++++++++++++++++++++---
> 2 files changed, 115 insertions(+), 8 deletions(-)
>
> --- 0001/drivers/iommu/Kconfig
> +++ work/drivers/iommu/Kconfig 2016-10-20 08:16:40.980607110 +0900
> @@ -274,6 +274,7 @@ config EXYNOS_IOMMU_DEBUG
>
> config IPMMU_VMSA
> bool "Renesas VMSA-compatible IPMMU"
> + depends on ARM || IOMMU_DMA
> depends on ARM_LPAE
> depends on ARCH_RENESAS || COMPILE_TEST
> select IOMMU_API
> --- 0006/drivers/iommu/ipmmu-vmsa.c
> +++ work/drivers/iommu/ipmmu-vmsa.c 2016-10-20 08:16:48.440607110 +0900
> @@ -10,6 +10,7 @@
>
> #include <linux/bitmap.h>
> #include <linux/delay.h>
> +#include <linux/dma-iommu.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> #include <linux/export.h>
> @@ -22,8 +23,10 @@
> #include <linux/sizes.h>
> #include <linux/slab.h>
>
> +#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
> #include <asm/dma-iommu.h>
> #include <asm/pgalloc.h>
> +#endif
>
> #include "io-pgtable.h"
>
> @@ -520,14 +523,6 @@ static struct iommu_domain *__ipmmu_doma
> return &domain->io_domain;
> }
>
> -static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
> -{
> - if (type != IOMMU_DOMAIN_UNMANAGED)
> - return NULL;
> -
> - return __ipmmu_domain_alloc(type);
> -}
> -
> static void ipmmu_domain_free(struct iommu_domain *io_domain)
> {
> struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain);
> @@ -714,6 +709,8 @@ error:
> return ret;
> }
>
> +#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
> +
> static int ipmmu_add_device(struct device *dev)
> {
> struct ipmmu_vmsa_archdata *archdata;
> @@ -807,6 +804,14 @@ static void ipmmu_remove_device(struct d
> dev->archdata.iommu = NULL;
> }
>
> +static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
> +{
> + if (type != IOMMU_DOMAIN_UNMANAGED)
> + return NULL;
> +
> + return __ipmmu_domain_alloc(type);
> +}
> +
> static const struct iommu_ops ipmmu_ops = {
> .domain_alloc = ipmmu_domain_alloc,
> .domain_free = ipmmu_domain_free,
> @@ -821,6 +826,105 @@ static const struct iommu_ops ipmmu_ops
> .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
> };
>
> +#endif /* !CONFIG_ARM && CONFIG_IOMMU_DMA */
> +
> +#ifdef CONFIG_IOMMU_DMA
> +
> +static struct iommu_domain *ipmmu_domain_alloc_dma(unsigned type)
> +{
> + struct iommu_domain *io_domain = NULL;
> +
> + switch (type) {
> + case IOMMU_DOMAIN_UNMANAGED:
> + io_domain = __ipmmu_domain_alloc(type);
> + break;
> +
> + case IOMMU_DOMAIN_DMA:
> + io_domain = __ipmmu_domain_alloc(type);
> + if (io_domain)
> + iommu_get_dma_cookie(io_domain);
> + break;
> + }
> +
> + return io_domain;
> +}
> +
> +static void ipmmu_domain_free_dma(struct iommu_domain *io_domain)
> +{
> + switch (io_domain->type) {
> + case IOMMU_DOMAIN_DMA:
> + iommu_put_dma_cookie(io_domain);
> + /* fall-through */
> + default:
> + ipmmu_domain_free(io_domain);
> + break;
> + }
> +}
> +
> +static int ipmmu_add_device_dma(struct device *dev)
> +{
> + struct iommu_group *group;
> +
> + /* only accept devices with iommus property */
Nitpicking, comments in the driver are capitalized and end with a period.
> + if (of_count_phandle_with_args(dev->of_node, "iommus",
> + "#iommu-cells") < 0)
> + return -ENODEV;
> +
> + group = iommu_group_get_for_dev(dev);
> + if (IS_ERR(group))
> + return PTR_ERR(group);
> +
> + return 0;
> +}
> +
> +static void ipmmu_remove_device_dma(struct device *dev)
> +{
> + iommu_group_remove_device(dev);
> +}
> +
> +static struct iommu_group *ipmmu_device_group_dma(struct device *dev)
> +{
> + struct iommu_group *group;
> + int ret;
> +
> + group = generic_device_group(dev);
> + if (IS_ERR(group))
> + return group;
> +
> + ret = ipmmu_init_platform_device(dev);
> + if (ret) {
> + iommu_group_put(group);
> + group = ERR_PTR(ret);
> + }
> +
> + return group;
> +}
> +
> +static int ipmmu_of_xlate_dma(struct device *dev,
> + struct of_phandle_args *spec)
> +{
> + /* dummy callback to satisfy of_iommu_configure() */
This is actually where you should parse the utlbs. If you switch to the
iommu_fwspec API as Robin proposed in his review of patch 6/7, I think you can
use iommu_fwspec_add_ids() as a helper function for this. See the arm-smmu-v3
driver for an example.
> + return 0;
> +}
> +
> +static const struct iommu_ops ipmmu_ops = {
> + .domain_alloc = ipmmu_domain_alloc_dma,
> + .domain_free = ipmmu_domain_free_dma,
> + .attach_dev = ipmmu_attach_device,
> + .detach_dev = ipmmu_detach_device,
> + .map = ipmmu_map,
> + .unmap = ipmmu_unmap,
> + .map_sg = default_iommu_map_sg,
> + .iova_to_phys = ipmmu_iova_to_phys,
> + .add_device = ipmmu_add_device_dma,
> + .remove_device = ipmmu_remove_device_dma,
> + .device_group = ipmmu_device_group_dma,
> + .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
> + .of_xlate = ipmmu_of_xlate_dma,
The ARM implementation should switch to .of_xlate() too. Have you given it a
try by any chance ?
> +};
> +
> +#endif /* CONFIG_IOMMU_DMA */
> +
> /* ------------------------------------------------------------------------
> * Probe/remove and init
> */
> @@ -910,7 +1014,9 @@ static int ipmmu_remove(struct platform_
> list_del(&mmu->list);
> spin_unlock(&ipmmu_devices_lock);
>
> +#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
> arm_iommu_release_mapping(mmu->mapping);
> +#endif
>
> ipmmu_device_reset(mmu);
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2016-11-11 1:24 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-19 23:35 [PATCH v6 00/07] iommu/ipmmu-vmsa: IPMMU multi-arch update V6 Magnus Damm
2016-10-19 23:35 ` Magnus Damm
2016-10-19 23:35 ` [PATCH v6 01/07] iommu/ipmmu-vmsa: Remove platform data handling Magnus Damm
2016-10-19 23:35 ` Magnus Damm
2016-10-19 23:35 ` [PATCH v6 02/07] iommu/ipmmu-vmsa: Rework interrupt code and use bitmap for context Magnus Damm
2016-10-19 23:35 ` Magnus Damm
2016-11-11 0:46 ` Laurent Pinchart
2016-11-11 0:46 ` Laurent Pinchart
2016-10-19 23:36 ` [PATCH v6 03/07] iommu/ipmmu-vmsa: Break out utlb parsing code Magnus Damm
2016-10-19 23:36 ` Magnus Damm
2016-11-11 1:00 ` Laurent Pinchart
2016-11-11 1:00 ` Laurent Pinchart
2016-10-19 23:36 ` [PATCH v6 04/07] iommu/ipmmu-vmsa: Break out domain allocation code Magnus Damm
2016-11-11 1:02 ` Laurent Pinchart
2016-11-11 1:02 ` Laurent Pinchart
2016-10-19 23:36 ` [PATCH v6 05/07] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops Magnus Damm
2016-10-19 23:36 ` Magnus Damm
2016-10-21 17:52 ` Robin Murphy
2016-10-21 17:52 ` Robin Murphy
2016-11-10 11:42 ` Joerg Roedel
[not found] ` <20161110114206.GC9996-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-11-11 1:13 ` Laurent Pinchart
2016-11-11 1:13 ` Laurent Pinchart
2016-11-11 10:37 ` Joerg Roedel
2016-11-11 1:50 ` Laurent Pinchart
2016-11-11 14:44 ` Robin Murphy
2016-11-11 14:44 ` Robin Murphy
[not found] ` <dbb87293-4760-607f-841c-368a5692ecc9-5wv7dgnIgG8@public.gmane.org>
2016-11-12 1:57 ` Laurent Pinchart
2016-11-12 1:57 ` Laurent Pinchart
2016-11-11 1:24 ` Laurent Pinchart [this message]
2016-11-11 1:24 ` Laurent Pinchart
2016-11-11 2:01 ` [PATCH] iommu/ipmmu-vmsa: Unify domain alloc/free implementations Laurent Pinchart
2016-11-11 2:01 ` Laurent Pinchart
2016-10-19 23:36 ` [PATCH v6 06/07] iommu/ipmmu-vmsa: ARM and ARM64 archdata access Magnus Damm
2016-10-21 17:32 ` Robin Murphy
2016-10-21 17:32 ` Robin Murphy
2016-11-11 1:27 ` Laurent Pinchart
2016-10-19 23:36 ` [PATCH v6 07/07] iommu/ipmmu-vmsa: Drop LPAE Kconfig dependency Magnus Damm
2016-10-19 23:36 ` Magnus Damm
2016-11-10 11:42 ` [PATCH v6 00/07] iommu/ipmmu-vmsa: IPMMU multi-arch update V6 Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3935390.6f0iEMmRcF@avalon \
--to=laurent.pinchart-rylnwiuwjnjg/c1bvhzhaw@public.gmane.org \
--cc=geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org \
--cc=horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.