* Intel Ext. 2_by_8() routines
@ 2000-07-31 9:48 David Vrabel
0 siblings, 0 replies; only message in thread
From: David Vrabel @ 2000-07-31 9:48 UTC (permalink / raw)
To: mtd
Hi,
I've added some *2_by_8() routines for the Intel Extended Command Set
(cfi_cmdset_0001.c).
cfi_intelext_setup() decides which ones to use based on the interleave.
Also, the erase block size is set from the CFI info. I've used the info
from the first erase block and assumed that they're all the same size
since MTD doesn't appear to support different erase block sizes.
This stuff has been tested on an Arcom Control Systems SBC-MediaGX (a
flash chip mapping for which has also been added).
Those of you with chips in x16 mode might like to check that the correct
routines and are selected.
David Vrabel
To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-07-31 9:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-07-31 9:48 Intel Ext. 2_by_8() routines David Vrabel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.