From: Martin Dalecki <dalecki@evision-ventures.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Keith Owens <kaos@ocs.com.au>,
Jeff Garzik <jgarzik@mandrakesoft.com>,
linux-kernel@vger.kernel.org
Subject: Re: Persistent module storage [was Linux 2.4 Status / TODO page]
Date: Mon, 06 Nov 2000 19:09:53 +0100 [thread overview]
Message-ID: <3A06F3F1.37F84C10@evision-ventures.com> (raw)
In-Reply-To: <E13spjq-0006OE-00@the-village.bc.nu>
Alan Cox wrote:
>
> > >Just load the driver at bootup and forget about it. Problem solved.
> >
> > I daily curse the name of whoever added autoload and autounload.
> > Autoload maybe useful, autounload is just asking for problems.
>
> Deal with it. Hardware is also now auto load and auto unloading too. For 2.5
> hopefully a lot of this can be tidied up and done better - persistent storage
> in the modules that is written to disk and put back by insmod/rmmod (in
> userspace) will help a lot.
Not quite: plugging physically hardware in and out is compleatly
different
then just loading a driver and unconditionally unloading it even when
the hardware is still there!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-11-06 17:16 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <3A06A053.56F09ACB@mandrakesoft.com>
2000-11-06 12:29 ` Persistent module storage [was Linux 2.4 Status / TODO page] Keith Owens
2000-11-06 17:07 ` Alan Cox
2000-11-06 18:09 ` Martin Dalecki [this message]
2000-11-06 17:30 ` Alan Cox
2000-11-06 17:05 ` Alan Cox
2000-11-06 18:30 ` Paul Jakma
2000-11-06 21:12 ` Martin Mares
2000-11-07 1:17 ` Horst von Brand
2000-11-07 9:59 ` Martin Mares
2000-11-07 10:59 ` Martin Dalecki
2000-11-07 12:27 ` Alan Cox
2000-11-07 7:55 David Feuer
-- strict thread matches above, loose matches on Subject: below --
2000-11-06 22:48 Wayne.Brown
2000-11-06 0:54 Linux 2.4 Status / TODO page (Updated as of 2.4.0-test10) David Woodhouse
2000-11-06 1:28 ` Persistent module storage [was Linux 2.4 Status / TODO page] Keith Owens
2000-11-06 6:39 ` David Woodhouse
2000-11-06 7:12 ` Oliver Xymoron
2000-11-06 7:17 ` David Woodhouse
2000-11-06 7:25 ` Jeff Garzik
2000-11-06 7:29 ` David Woodhouse
2000-11-06 10:53 ` Alan Cox
2000-11-06 11:03 ` Dan Hollis
2000-11-06 11:04 ` Jeff Garzik
2000-11-06 11:35 ` Alan Cox
2000-11-06 11:36 ` Jeff Garzik
2000-11-06 11:06 ` David Woodhouse
2000-11-06 11:09 ` Jeff Garzik
2000-11-06 11:20 ` Jeff Garzik
2000-11-06 11:37 ` David Woodhouse
2000-11-06 11:40 ` Jeff Garzik
2000-11-06 11:47 ` David Woodhouse
2000-11-06 11:57 ` Jeff Garzik
2000-11-06 12:03 ` Alan Cox
2000-11-06 13:12 ` David Woodhouse
2000-11-06 13:38 ` Jeff Garzik
2000-11-06 13:56 ` David Woodhouse
2000-11-06 13:21 ` David Woodhouse
2000-11-06 13:35 ` James A. Sutherland
2000-11-06 17:12 ` Alan Cox
2000-11-06 17:38 ` James A. Sutherland
2000-11-06 18:39 ` Paul Jakma
2000-11-06 21:28 ` Alan Cox
2000-11-06 18:55 ` Dan Hollis
2000-11-07 0:18 ` James A. Sutherland
2000-11-07 0:27 ` Alan Cox
2000-11-07 0:38 ` James A. Sutherland
2000-11-07 12:07 ` Alan Cox
2000-11-07 12:13 ` James A. Sutherland
2000-11-07 12:35 ` Alan Cox
2000-11-07 12:49 ` James A. Sutherland
2000-11-07 12:52 ` Alan Cox
2000-11-07 12:51 ` Petko Manolov
2000-11-06 13:40 ` David Woodhouse
2000-11-06 15:23 ` James A. Sutherland
2000-11-06 15:34 ` David Woodhouse
2000-11-06 16:31 ` Horst von Brand
2000-11-06 17:06 ` David Woodhouse
2000-11-06 17:25 ` Alon Ziv
2000-11-06 17:34 ` Alan Cox
2000-11-06 19:49 ` Rogier Wolff
2000-11-06 21:34 ` Alan Cox
2000-11-06 17:25 ` David Woodhouse
2000-11-06 19:27 ` Tim Riker
2000-11-06 21:33 ` Alan Cox
2000-11-06 23:57 ` Horst von Brand
2000-11-06 17:23 ` Alan Cox
2000-11-08 14:56 ` Jamie Lokier
2000-11-06 18:00 ` Martin Dalecki
2000-11-06 17:29 ` Alan Cox
2000-11-06 16:42 ` James A. Sutherland
2000-11-06 16:57 ` Horst von Brand
2000-11-06 17:01 ` James A. Sutherland
2000-11-06 23:54 ` Horst von Brand
2000-11-07 8:44 ` James A. Sutherland
2000-11-06 17:12 ` David Woodhouse
2000-11-06 17:45 ` James A. Sutherland
2000-11-06 18:37 ` Paul Jakma
2000-11-07 0:04 ` Horst von Brand
2000-11-06 17:08 ` David Woodhouse
2000-11-06 17:33 ` James A. Sutherland
2000-11-06 23:28 ` Gerhard Mack
2000-11-07 0:34 ` James A. Sutherland
2000-11-07 0:42 ` Gerhard Mack
2000-11-07 0:43 ` James A. Sutherland
2000-11-07 1:20 ` Gerhard Mack
2000-11-07 8:41 ` James A. Sutherland
2000-11-07 1:44 ` Horst von Brand
2000-11-06 17:44 ` David Woodhouse
2000-11-06 17:53 ` James A. Sutherland
2000-11-06 20:46 ` Evan Jeffrey
2000-11-07 0:23 ` James A. Sutherland
2000-11-06 15:15 ` Martin Dalecki
2000-11-06 17:19 ` Alan Cox
2000-11-06 17:34 ` David Woodhouse
2000-11-06 18:22 ` Oliver Xymoron
2000-11-06 18:37 ` Jeff Garzik
2000-11-06 19:09 ` Oliver Xymoron
2000-11-07 0:32 ` Horst von Brand
2000-11-06 21:19 ` Alan Cox
2000-11-06 18:22 ` Paul Jakma
2000-11-06 21:18 ` Alan Cox
2000-11-06 23:00 ` Paul Jakma
2000-11-07 2:11 ` Keith Owens
2000-11-06 7:28 ` Oliver Xymoron
2000-11-06 7:32 ` David Woodhouse
2000-11-06 7:45 ` Jeff Garzik
2000-11-06 8:00 ` David Woodhouse
2000-11-06 13:44 ` Andrew Pimlott
2000-11-06 7:48 ` Oliver Xymoron
2000-11-06 8:02 ` David Woodhouse
2000-11-06 18:09 ` Eric W. Biederman
2000-11-06 21:17 ` Alan Cox
2000-11-07 9:55 ` Helge Hafting
2000-11-07 2:09 ` Keith Owens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A06F3F1.37F84C10@evision-ventures.com \
--to=dalecki@evision-ventures.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jgarzik@mandrakesoft.com \
--cc=kaos@ocs.com.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.