From: Zanetti Arnaud <Arnaud.Zanetti@insa-lyon.fr>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM : Networking stops working with kernel 2.4.0-test11
Date: Mon, 18 Dec 2000 00:56:50 +0100 [thread overview]
Message-ID: <3A3D52C2.2260F6D2@insa-lyon.fr> (raw)
Summary
After an undetermined amount of download, eth0 just stop
receiving/transmitting bytes
Description:
After working perfectly for an undetermined time / volume of download,
eth0 just stop working (i.e. : it won'n receive/transmit anymore bytes).
I just can see the 'drop' field in /proc/net/dev increasing, all other
fields just remaining the same.
I tried to bring eth0 down and up again and it doesn't work.
Ad it happens only during intensive download (>100Ko/s) I suspected a
security mecanism could have seen it as an attack, but I couldn't figure
out what mecanism it could have been. Comparing /proc/sys/net both in
working and stopped situation with a
more $(find net/ -type f) >~/sys.net.ok
and a
more $(find net/ -type f) >~/sys.net.stopped
I found strictly no differences (i.e. the 'diff' command found no
differences)
Keywords:
networking
Kernel version:
Linux version 2.4.0-test11-zatto (root@zatto.resI.insa-lyon.fr) (gcc
version egcs-2.91.66.1 19990314/Linux (egcs-1.1.2 release)) #3 SMP mer
déc 6 15:40:04 CET 2000
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux zatto.resI.insa-lyon.fr 2.4.0-test11-zatto #3 SMP mer déc 6
15:40:04 CET 2000 i686 unknown
Kernel modules 2.3.18
Gnu C 2.95.3
Gnu Make 3.79.1
Binutils 2.10.0.24
Linux C Library 2.1.3
Dynamic linker ldd (GNU libc) 2.1.3
Procps 2.0.7
Mount 2.10o
Net-tools 1.57
Console-tools 0.2.3
Sh-utils 2.0
Modules Loaded ne2k-pci 8390 nls_iso8859-1 nls_cp437 loop tuner
bttv videodev sr_mod cdrom
CPU:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 400.000918
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
features : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr
bogomips : 799.54
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 400.000918
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
features : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr
bogomips : 801.18
Modules loaded:
ne2k-pci 4896 1
8390 6784 0 [ne2k-pci]
nls_iso8859-1 2848 1 (autoclean)
nls_cp437 4368 1 (autoclean)
loop 7744 0 (unused)
tuner 3264 1 (autoclean)
bttv 57584 0 (unused)
videodev 4832 2 [bttv]
sr_mod 12160 2
cdrom 27648 0 [sr_mod]
/proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
4000-4003 : acpi
4004-4005 : acpi
4008-400b : acpi
400c-400f : acpi
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
c000-c01f : Intel Corporation 82371AB PIIX4 USB
c400-c43f : Ensoniq 5880 AudioPCI
c400-c43f : es1371
c800-c81f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
c800-c81f : ne2k-pci
cc00-ccff : 3Dfx Interactive, Inc. Voodoo 3
d000-d007 : Triones Technologies, Inc. HPT366
d400-d403 : Triones Technologies, Inc. HPT366
d800-d8ff : Triones Technologies, Inc. HPT366
d800-d807 : ide2
d810-d8ff : HPT366
dc00-dc07 : Triones Technologies, Inc. HPT366 (#2)
e000-e003 : Triones Technologies, Inc. HPT366 (#2)
e400-e4ff : Triones Technologies, Inc. HPT366 (#2)
e400-e407 : ide3
e410-e4ff : HPT366
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
/proc/iomem
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-13ffffff : System RAM
00100000-0025ad97 : Kernel code
0025ad98-00270f9f : Kernel data
d0000000-d3ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
d4000000-d5ffffff : 3Dfx Interactive, Inc. Voodoo 3
d6000000-d7ffffff : 3Dfx Interactive, Inc. Voodoo 3
d9000000-d9000fff : Brooktree Corporation Bt848 TV with DMA push
d9000000-d9000fff : bttv
lspci -vvv
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at c000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c400 [size=64]
Capabilities: <available only to root>
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=32]
00:0f.0 Multimedia video controller: Brooktree Corporation Bt848 TV with
DMA push (rev 12)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d9000000 (32-bit, prefetchable) [size=4K]
00:11.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev
01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
Region 2: I/O ports at cc00 [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00:13.0 Unknown mass storage controller: Triones Technologies, Inc.
HPT366 (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at d400 [size=4]
Region 4: I/O ports at d800 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
00:13.1 Unknown mass storage controller: Triones Technologies, Inc.
HPT366 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at e000 [size=4]
Region 4: I/O ports at e400 [size=256]
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IDE-CD Model: R/RW 4x4x24 Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
/proc/interrupts
CPU0 CPU1
0: 122862 121853 IO-APIC-edge timer
1: 4209 3950 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
9: 0 0 IO-APIC-edge acpi
12: 31518 30952 IO-APIC-edge PS/2 Mouse
14: 10744 10757 IO-APIC-edge ide0
15: 48575 49118 IO-APIC-edge ide1
16: 4 1 IO-APIC-level bttv
18: 12283 11918 IO-APIC-level eth0
19: 0 0 IO-APIC-level es1371
NMI: 244639 244639
LOC: 244049 243832
ERR: 0
Note : I have a problem with my NIC : it has its MAC address set to
00:00:00:00:00:00 by default and I have to force it to its real MAC
address specified in /etc/sysconfig/network-scripts/ifcfg-eth0.
I hope this report might be of any use for you (and for me ;-)
Thanx
-- Nono
e-mail : azanetti@ifaedi.insa-lyon.fr
ICQ : 23137282
tel : 06.84.05.03.51 (un petit message, ca fait tjs plaisir)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2000-12-18 0:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-17 23:56 Zanetti Arnaud [this message]
2000-12-18 0:40 ` PROBLEM : Networking stops working with kernel 2.4.0-test11 Jorge Nerin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A3D52C2.2260F6D2@insa-lyon.fr \
--to=arnaud.zanetti@insa-lyon.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.