From: Jorge Nerin <comandante@zaralinux.com>
To: Arnaud.Zanetti@insa-lyon.fr
Cc: linux-kernel@vger.kernel.org
Subject: Re: PROBLEM : Networking stops working with kernel 2.4.0-test11
Date: Mon, 18 Dec 2000 01:40:07 +0100 [thread overview]
Message-ID: <3A3D5CE7.E6C9B07B@zaralinux.com> (raw)
In-Reply-To: <3A3D52C2.2260F6D2@insa-lyon.fr>
Zanetti Arnaud wrote:
>
> Summary
> After an undetermined amount of download, eth0 just stop
> receiving/transmitting bytes
>
> Description:
> After working perfectly for an undetermined time / volume of download,
> eth0 just stop working (i.e. : it won'n receive/transmit anymore bytes).
> I just can see the 'drop' field in /proc/net/dev increasing, all other
> fields just remaining the same.
> I tried to bring eth0 down and up again and it doesn't work.
> Ad it happens only during intensive download (>100Ko/s) I suspected a
> security mecanism could have seen it as an attack, but I couldn't figure
> out what mecanism it could have been. Comparing /proc/sys/net both in
> working and stopped situation with a
> more $(find net/ -type f) >~/sys.net.ok
> and a
> more $(find net/ -type f) >~/sys.net.stopped
> I found strictly no differences (i.e. the 'diff' command found no
> differences)
>
> Keywords:
> networking
>
> Kernel version:
> Linux version 2.4.0-test11-zatto (root@zatto.resI.insa-lyon.fr) (gcc
> version egcs-2.91.66.1 19990314/Linux (egcs-1.1.2 release)) #3 SMP mer
> déc 6 15:40:04 CET 2000
>
> -- Versions installed: (if some fields are empty or look
> -- unusual then possibly you have very old versions)
> Linux zatto.resI.insa-lyon.fr 2.4.0-test11-zatto #3 SMP mer déc 6
> 15:40:04 CET 2000 i686 unknown
> Kernel modules 2.3.18
> Gnu C 2.95.3
> Gnu Make 3.79.1
> Binutils 2.10.0.24
> Linux C Library 2.1.3
> Dynamic linker ldd (GNU libc) 2.1.3
> Procps 2.0.7
> Mount 2.10o
> Net-tools 1.57
> Console-tools 0.2.3
> Sh-utils 2.0
> Modules Loaded ne2k-pci 8390 nls_iso8859-1 nls_cp437 loop tuner
> bttv videodev sr_mod cdrom
>
> CPU:
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 6
> model name : Celeron (Mendocino)
> stepping : 5
> cpu MHz : 400.000918
> cache size : 128 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> features : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 mmx fxsr
> bogomips : 799.54
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 6
> model : 6
> model name : Celeron (Mendocino)
> stepping : 5
> cpu MHz : 400.000918
> cache size : 128 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> features : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 mmx fxsr
> bogomips : 801.18
>
> Modules loaded:
> ne2k-pci 4896 1
> 8390 6784 0 [ne2k-pci]
> nls_iso8859-1 2848 1 (autoclean)
> nls_cp437 4368 1 (autoclean)
> loop 7744 0 (unused)
> tuner 3264 1 (autoclean)
> bttv 57584 0 (unused)
> videodev 4832 2 [bttv]
> sr_mod 12160 2
> cdrom 27648 0 [sr_mod]
>
> /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 0cf8-0cff : PCI conf1
> 4000-403f : Intel Corporation 82371AB PIIX4 ACPI
> 4000-4003 : acpi
> 4004-4005 : acpi
> 4008-400b : acpi
> 400c-400f : acpi
> 5000-501f : Intel Corporation 82371AB PIIX4 ACPI
> c000-c01f : Intel Corporation 82371AB PIIX4 USB
> c400-c43f : Ensoniq 5880 AudioPCI
> c400-c43f : es1371
> c800-c81f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
> c800-c81f : ne2k-pci
> cc00-ccff : 3Dfx Interactive, Inc. Voodoo 3
> d000-d007 : Triones Technologies, Inc. HPT366
> d400-d403 : Triones Technologies, Inc. HPT366
> d800-d8ff : Triones Technologies, Inc. HPT366
> d800-d807 : ide2
> d810-d8ff : HPT366
> dc00-dc07 : Triones Technologies, Inc. HPT366 (#2)
> e000-e003 : Triones Technologies, Inc. HPT366 (#2)
> e400-e4ff : Triones Technologies, Inc. HPT366 (#2)
> e400-e407 : ide3
> e410-e4ff : HPT366
> f000-f00f : Intel Corporation 82371AB PIIX4 IDE
> f000-f007 : ide0
> f008-f00f : ide1
>
> /proc/iomem
>
> 00000000-0009efff : System RAM
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-13ffffff : System RAM
> 00100000-0025ad97 : Kernel code
> 0025ad98-00270f9f : Kernel data
> d0000000-d3ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
> d4000000-d5ffffff : 3Dfx Interactive, Inc. Voodoo 3
> d6000000-d7ffffff : 3Dfx Interactive, Inc. Voodoo 3
> d9000000-d9000fff : Brooktree Corporation Bt848 TV with DMA push
> d9000000-d9000fff : bttv
>
> lspci -vvv
>
> 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
> (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 32
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: <available only to root>
>
> 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge
> (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B+
>
> 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
> (prog-if 80 [Master])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Region 4: I/O ports at f000 [size=16]
>
> 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
> (prog-if 00 [UHCI])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Interrupt: pin D routed to IRQ 19
> Region 4: I/O ports at c000 [size=32]
>
> 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
> Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 32 (3000ns min, 32000ns max)
> Interrupt: pin A routed to IRQ 19
> Region 0: I/O ports at c400 [size=64]
> Capabilities: <available only to root>
>
> 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8029(AS)
> Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS)
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at c800 [size=32]
>
> 00:0f.0 Multimedia video controller: Brooktree Corporation Bt848 TV with
> DMA push (rev 12)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at d9000000 (32-bit, prefetchable) [size=4K]
>
> 00:11.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev
> 01) (prog-if 00 [VGA])
> Subsystem: 3Dfx Interactive, Inc. Voodoo3
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR+
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M]
> Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
> Region 2: I/O ports at cc00 [size=256]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: <available only to root>
>
> 00:13.0 Unknown mass storage controller: Triones Technologies, Inc.
> HPT366 (rev 01)
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 120 (2000ns min, 2000ns max), cache line size 08
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at d000 [size=8]
> Region 1: I/O ports at d400 [size=4]
> Region 4: I/O ports at d800 [size=256]
> Expansion ROM at <unassigned> [disabled] [size=128K]
>
> 00:13.1 Unknown mass storage controller: Triones Technologies, Inc.
> HPT366 (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 120 (2000ns min, 2000ns max), cache line size 08
> Interrupt: pin B routed to IRQ 18
> Region 0: I/O ports at dc00 [size=8]
> Region 1: I/O ports at e000 [size=4]
> Region 4: I/O ports at e400 [size=256]
>
> /proc/scsi/scsi
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: IDE-CD Model: R/RW 4x4x24 Rev: 1.04
> Type: CD-ROM ANSI SCSI revision: 02
>
> /proc/interrupts
>
> CPU0 CPU1
> 0: 122862 121853 IO-APIC-edge timer
> 1: 4209 3950 IO-APIC-edge keyboard
> 2: 0 0 XT-PIC cascade
> 9: 0 0 IO-APIC-edge acpi
> 12: 31518 30952 IO-APIC-edge PS/2 Mouse
> 14: 10744 10757 IO-APIC-edge ide0
> 15: 48575 49118 IO-APIC-edge ide1
> 16: 4 1 IO-APIC-level bttv
> 18: 12283 11918 IO-APIC-level eth0
> 19: 0 0 IO-APIC-level es1371
> NMI: 244639 244639
> LOC: 244049 243832
> ERR: 0
>
> Note : I have a problem with my NIC : it has its MAC address set to
> 00:00:00:00:00:00 by default and I have to force it to its real MAC
> address specified in /etc/sysconfig/network-scripts/ifcfg-eth0.
>
> I hope this report might be of any use for you (and for me ;-)
> Thanx
>
> -- Nono
> e-mail : azanetti@ifaedi.insa-lyon.fr
> ICQ : 23137282
> tel : 06.84.05.03.51 (un petit message, ca fait tjs plaisir)
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
I have an almos identical system as you, 2x200MMX motherboard (Gigabyte
586DX) also Voodoo3 (2000 pci) the same nic Realtek 8029AS, also a bt848
tv card, also SCSI (Aic-7880 onboard, but not used).
I have reported it some time ago, and now all I get with
2.4.0-test11-pre4 and I think a additional patch is NETDEV WATCHDOG:
eth0: transmit timed out, and something in the console about lost irq?
I can't reproduce it with a uniprocesor kernel, and I have a 3c503 card
wich uses the 8390 module, so I suppose that the problem it's not in the
8390, and it seems to be smp related.
--
Jorge Nerin
<comandante@zaralinux.com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
prev parent reply other threads:[~2000-12-18 1:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-17 23:56 PROBLEM : Networking stops working with kernel 2.4.0-test11 Zanetti Arnaud
2000-12-18 0:40 ` Jorge Nerin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A3D5CE7.E6C9B07B@zaralinux.com \
--to=comandante@zaralinux.com \
--cc=Arnaud.Zanetti@insa-lyon.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.