Re: Problems with a Magik1 chipset board

Re: Problems with a Magik1 chipset board

[Alan Cox]

> Second, for agpgart I have to use try_agp_unsupported=1 which gets me
> agpgart: Trying generic Ali routines for device id: 1647

Use the 2.4.1-ac patches, those should give you AGP


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Problems with a Magik1 chipset board

[David Pyke]

I own a Iwill KA266 which uses the ALi M1647 northbridge and M1535D+ 
south.  I'm getting errors on startup and thought I should see if this 
is an issue with the set or kernel 2.4.1

First, during the ALI15X3 starup I get:

PCI: No IRQ known for interrupt pin A of device 00:04.0.  Please try 
pci=biosirq

according to /proc/pci,00:04.0 is an ALi M5229 IDE (rev 196).

Second, for agpgart I have to use try_agp_unsupported=1 which gets me

agpgart: Trying generic Ali routines for device id: 1647

according to my nvidia driver proc entry, agp is not enabled.

Is there more information I should provide?

Thanks
Dave Pyke

-- 
No disclaimer shall be read or observed.  Any person (either corporate 
or individual) making any statement shall be held civily and criminally 
liable as a party to any act I may do while following the intentional, 
implied or inferred (whether correctly or not) directions from said 
statement.  So there.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/