* [PATCH] hd.c needs max_sectors set
@ 2001-02-16 10:37 Paul Gortmaker
0 siblings, 0 replies; only message in thread
From: Paul Gortmaker @ 2001-02-16 10:37 UTC (permalink / raw)
To: linux-kernel list
[Yet more fixes from the OCD - Obsolete Cruft Department ]
Couldn't figure out why my el-lame-o testbox was generating random I/O
errors on large writes. I first suspected another booger cut loose in
the disk and generated the typical storm of errors since it has some
hundred or so bad blocks already... :)
I've supplied a similar fix for drivers/block/xd.c (untested, but
compiles & is straightforward). I'm tempted to just mark xd.c
with CONFIG_OBSOLETE anyway. Anybody really see using this in 2.4.x,
even if just as a boot device for a closet box?
Paul.
--- drivers/ide/hd.c~ Thu Feb 15 03:33:12 2001
+++ drivers/ide/hd.c Thu Feb 15 06:55:28 2001
@@ -22,6 +22,9 @@
* This is now a lightweight ST-506 driver. (Paul Gortmaker)
*
* Modified 1995 Russell King for ARM processor.
+ *
+ * Bugfix: max_sectors must be <= 255 or the wheels tend to come
+ * off in a hurry once you queue things up - Paul G. 02/2001
*/
/*
@@ -106,6 +109,7 @@
static int hd_sizes[MAX_HD<<6];
static int hd_blocksizes[MAX_HD<<6];
static int hd_hardsectsizes[MAX_HD<<6];
+static int hd_maxsect[MAX_HD<<6];
static struct timer_list device_timer;
@@ -732,9 +736,11 @@
for(drive=0; drive < (MAX_HD << 6); drive++) {
hd_blocksizes[drive] = 1024;
hd_hardsectsizes[drive] = 512;
+ hd_maxsect[drive]=255;
}
blksize_size[MAJOR_NR] = hd_blocksizes;
hardsect_size[MAJOR_NR] = hd_hardsectsizes;
+ max_sectors[MAJOR_NR] = hd_maxsect;
#ifdef __i386__
if (!NR_HD) {
--- drivers/block/xd.c~ Mon Nov 20 04:16:39 2000
+++ drivers/block/xd.c Fri Feb 16 05:22:03 2001
@@ -28,6 +28,9 @@
* Recovered DMA access. Abridged messages. Added support for DTC5051CX,
* WD1002-27X & XEBEC controllers. Driver uses now some jumper settings.
* Extended ioctl() support.
+ *
+ * Bugfix: 15/02/01, Paul G. - inform queue layer of tiny xd_maxsect.
+ *
*/
#include <linux/module.h>
@@ -118,6 +121,7 @@
static struct hd_struct xd_struct[XD_MAXDRIVES << 6];
static int xd_sizes[XD_MAXDRIVES << 6], xd_access[XD_MAXDRIVES];
static int xd_blocksizes[XD_MAXDRIVES << 6];
+static int xd_maxsect[XD_MAXDRIVES << 6];
extern struct block_device_operations xd_fops;
@@ -241,6 +245,10 @@
else
printk("xd: unable to get IRQ%d\n",xd_irq);
}
+
+ /* xd_maxsectors depends on controller - so set after detection */
+ for(i=0; i<(XD_MAXDRIVES << 6); i++) xd_maxsect[i] = xd_maxsectors;
+ max_sectors[MAJOR_NR] = xd_maxsect;
for (i = 0; i < xd_drives; i++) {
xd_valid[i] = 1;
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-02-16 10:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-02-16 10:37 [PATCH] hd.c needs max_sectors set Paul Gortmaker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.