* 2.4.2-acXX hangs on boot if IrDA is in kernel
@ 2001-03-20 10:31 Alessandro Suardi
0 siblings, 0 replies; only message in thread
From: Alessandro Suardi @ 2001-03-20 10:31 UTC (permalink / raw)
To: alan; +Cc: linux-kernel
Hi Alan,
tried as you suggested to config out IrDA and indeed the kernel boots.
Even in -ac20 my Dell Latitude laptop hangs in the RH7.0 init sequence
after printing the IRCOMM line. C-A-D doesn't do anything but I can use
Magic Sysrq to reboot.
I am available for further diagnostic investigation. Just in case, this
is my IrDA h/w (booted into 2.4.3-pre4).
[root@princess /root]# findchip -v
Found SMC FDC37N958FR Controller at 0x3f0, DevID=0x01, Rev. 1
SIR Base 0x3e8, FIR Base 0x290
IRQ = 4, DMA = 3
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 3 us
Thanks & ciao,
--alessandro <alessandro.suardi@oracle.com> <asuardi@uninetcom.it>
Linux: kernel 2.2.19p17/2.4.3p4 glibc-2.2 gcc-2.96-69 binutils-2.11.90.0.1
Oracle: Oracle8i 8.1.7.0.1 Enterprise Edition for Linux
motto: Tell the truth, there's less to remember.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-03-20 10:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-20 10:31 2.4.2-acXX hangs on boot if IrDA is in kernel Alessandro Suardi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.