Re: [parisc-linux] Serial PDC console on 712/601

[Christoph Plattner <christoph.plattner@alcatel.at>]

Very intersting the method of using the ISL commands to switch
over. And I think I also can switch back using this method.
Is this correct ?

But what is this "dagger" card.
Where does the machine store the information ?
Flash/EEPROM/battery backuped SRAM ?
Can I do a "backup" copy (I have an universial chip programmer
at home, and other tools !) ?
Can I make such a "dagger" card (whatever it is ?

Please give me some hints, before I "risk" the change !

With friendly regards
	Christoph Plattner



------------------------------------------------------------------
private:  christoph.plattner@gmx.at
company:  christoph.plattner@alcatel.at


Matthieu Delahaye wrote:
> 
> Christoph Plattner wrote:
> >
> > Hello HP hackers !
> >
> > I have a problem setting the PDC console path to serial.
> > How can be done this on the HP 712/60.
> > On my 9000/720 I can use the `path' command on the PDC
> > console (admin mode). But on the 712/60, the `path' command
> > only sets the boot paths (primary, secondary), but not the
> > console.
> >
> > Is it possible to use the 712/60 with serial console only
> > (no display and keyboard) ?
> > How can I set serial console ?
> >
> > With friendly regards
> >         Christoph Plattner
> >
> > --
> > -------------------------------------------------------------------------
> > private:        christoph.plattner@gmx.at
> > company:        christoph.plattner@alcatel.at
> >
> > _______________________________________________
> > parisc-linux mailing list
> > parisc-linux@lists.parisc-linux.org
> > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
> 
> >From Pa-RISC/Linux Boot Howto:
> 
> 3.1.2.3.3. How can I change the boot console to serial on a 712?
> 
>    Unfortunately, you can't. Although 712s are configured for in-house
> HP development to use serial console, this configuration
>    isn't supported in the field. You have to use a graphics console for
> 712s.
> 
> http://www.oswg.org/oswg-nightly/oswg/en_US.ISO_8859-1/articles/
> parisc-linux/parisc-linux-boot/
> 
> But it seems you can, after dangerous manipulations:
> 
> http://lists.parisc-linux.org/pipermail/parisc-linux/1999-December/008117.html
> 
> regards,
> Matthieu
> 
> --
> Matthieu Delahaye
> ESIEE Team
> http://mkhppa1.esiee.fr/
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux


------------------------------------------------------------------
private:  christoph.plattner@gmx.at
company:  christoph.plattner@alcatel.at