* Bad aic7xxx driver or bad harddisk?
@ 2001-05-10 2:49 Steven J. Hill
0 siblings, 0 replies; only message in thread
From: Steven J. Hill @ 2001-05-10 2:49 UTC (permalink / raw)
To: lkml
Greetings.
I recently bought an IBM Ultrastar 18GB Model DDYS-T18350N
which is an UltraSCSI 10000 RPM drive. Here are the system
specifications:
DELL Precision 420
- Pentium III at 800MHz
- 256MB worth of RambusDIMMs
- (2) on-board Adaptec aic7899 Ultra160 SCSI adapters
- (1) 9.1GB - Fujitsu Model MAJ3091MP SCSI harddrive
I simply wanted to add the IBM drive for more disk space. I
am using linux-2.4.4-ac6. I made a single partition taking
up the entire disk and issued the following:
mke2fs -c -m1 /dev/sdb1
It starts out fine but then eventually it gets enough r/w
errors and locks the machine up. Below is the log output.
I can supply a kernel configuration file, but it probably
is not necessary. I have been following some of the threads
on the list concerning the aic7xxx driver, but may have
missed some. I apologize if this is old information. It
looks like a may have gotten a bad drive. Comments? Thanks.
-Steve
****************
LOG OUTPUT
****************
May 9 21:08:57 ptecdev1 kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 r
eturn code = 8000002
May 9 21:08:57 ptecdev1 kernel: [valid=0] Info fld=0x0, Current sd08:11: sense
key None
May 9 21:08:57 ptecdev1 kernel: I/O error: dev 08:11, sector 725376
May 9 21:09:27 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue an ABORT messa
ge
May 9 21:09:27 ptecdev1 kernel: (scsi0:A:6:0): Queuing a recovery SCB
May 9 21:09:27 ptecdev1 kernel: scsi0:0:6:0: Device is disconnected, re-queuing
SCB
May 9 21:09:27 ptecdev1 kernel: Recovery code sleeping
May 9 21:09:27 ptecdev1 kernel: (scsi0:A:6:0): Abort Tag Message Sent
May 9 21:09:27 ptecdev1 kernel: (scsi0:A:6:0): SCB 7 - Abort Tag Completed.
May 9 21:09:27 ptecdev1 kernel: Recovery SCB completes
May 9 21:09:27 ptecdev1 kernel: Recovery code awake
May 9 21:09:27 ptecdev1 kernel: aic7xxx_abort returns 8194
May 9 21:09:38 ptecdev1 kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 r
eturn code = 8000002
May 9 21:09:38 ptecdev1 kernel: [valid=0] Info fld=0x0, Current sd08:11: sense
key None
May 9 21:09:38 ptecdev1 kernel: I/O error: dev 08:11, sector 1451920
May 9 21:10:08 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue an ABORT messa
May 9 21:10:08 ptecdev1 kernel: (scsi0:A:6:0): Queuing a recovery SCB
May 9 21:10:08 ptecdev1 kernel: scsi0:0:6:0: Device is disconnected, re-queuing
SCB
May 9 21:10:08 ptecdev1 kernel: Recovery code sleeping
May 9 21:10:08 ptecdev1 kernel: (scsi0:A:6:0): Abort Tag Message Sent
May 9 21:10:08 ptecdev1 kernel: (scsi0:A:6:0): SCB 5 - Abort Tag Completed.
May 9 21:10:08 ptecdev1 kernel: Recovery SCB completes
May 9 21:10:08 ptecdev1 kernel: Recovery code awake
May 9 21:10:08 ptecdev1 kernel: aic7xxx_abort returns 8194
May 9 21:10:40 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue an ABORT messa
ge
May 9 21:10:40 ptecdev1 kernel: (scsi0:A:6:0): Queuing a recovery SCB
May 9 21:10:40 ptecdev1 kernel: scsi0:0:6:0: Device is disconnected, re-queuing
SCB
May 9 21:10:40 ptecdev1 kernel: Recovery code sleeping
May 9 21:10:45 ptecdev1 kernel: Recovery code awake
May 9 21:10:45 ptecdev1 kernel: Timer Expired
May 9 21:10:45 ptecdev1 kernel: aic7xxx_abort returns 8195
May 9 21:10:45 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue a TARGET RESET
message
May 9 21:10:45 ptecdev1 kernel: aic7xxx_dev_reset returns 8195
May 9 21:10:45 ptecdev1 kernel: Recovery SCB completes
May 9 21:10:52 ptecdev1 kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 r
eturn code = 8000002
May 9 21:10:52 ptecdev1 kernel: [valid=0] Info fld=0x0, Current sd08:11: sense
key None
May 9 21:10:52 ptecdev1 kernel: I/O error: dev 08:11, sector 1687072
May 9 21:11:22 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue an ABORT messa
ge
May 9 21:11:22 ptecdev1 kernel: (scsi0:A:6:0): Queuing a recovery SCB
May 9 21:11:22 ptecdev1 kernel: scsi0:0:6:0: Device is disconnected, re-queuing
SCB
May 9 21:11:22 ptecdev1 kernel: Recovery code sleeping
May 9 21:11:22 ptecdev1 kernel: (scsi0:A:6:0): Abort Tag Message Sent
May 9 21:11:22 ptecdev1 kernel: (scsi0:A:6:0): SCB 5 - Abort Tag Completed.
May 9 21:11:22 ptecdev1 kernel: Recovery SCB completes
May 9 21:11:22 ptecdev1 kernel: Recovery code awake
May 9 21:11:22 ptecdev1 kernel: aic7xxx_abort returns 8194
May 9 21:11:23 ptecdev1 kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 r
eturn code = 8000002
May 9 21:11:23 ptecdev1 kernel: [valid=0] Info fld=0x0, Current sd08:11: sense
key None
May 9 21:11:23 ptecdev1 kernel: I/O error: dev 08:11, sector 1763376
May 9 21:11:53 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue an ABORT messa
ge
May 9 21:11:53 ptecdev1 kernel: (scsi0:A:6:0): Queuing a recovery SCB
May 9 21:11:53 ptecdev1 kernel: scsi0:0:6:0: Device is disconnected, re-queuing
SCB
May 9 21:11:53 ptecdev1 kernel: Recovery code sleeping
May 9 21:11:53 ptecdev1 kernel: (scsi0:A:6:0): Abort Tag Message Sent
May 9 21:11:53 ptecdev1 kernel: (scsi0:A:6:0): SCB 19 - Abort Tag Completed.
May 9 21:11:53 ptecdev1 kernel: Recovery SCB completes
May 9 21:11:53 ptecdev1 kernel: Recovery code awake
May 9 21:11:53 ptecdev1 kernel: aic7xxx_abort returns 8194
May 9 21:12:26 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue an ABORT messa
ge
May 9 21:12:26 ptecdev1 kernel: (scsi0:A:6:0): Queuing a recovery SCB
May 9 21:12:26 ptecdev1 kernel: scsi0:0:6:0: Device is disconnected, re-queuing
SCB
May 9 21:12:26 ptecdev1 kernel: Recovery code sleeping
May 9 21:12:26 ptecdev1 kernel: (scsi0:A:6:0): Abort Tag Message Sent
May 9 21:12:26 ptecdev1 kernel: (scsi0:A:6:0): SCB 5 - Abort Tag Completed.
May 9 21:12:26 ptecdev1 kernel: Recovery SCB completes
May 9 21:12:26 ptecdev1 kernel: Recovery code awake
May 9 21:12:26 ptecdev1 kernel: aic7xxx_abort returns 8194
May 9 21:12:27 ptecdev1 kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 r
eturn code = 8000002
May 9 21:12:27 ptecdev1 kernel: [valid=0] Info fld=0x0, Current sd08:11: sense
key None
May 9 21:12:27 ptecdev1 kernel: I/O error: dev 08:11, sector 2034752
May 9 21:12:57 ptecdev1 kernel: scsi0:0:6:0: Attempting to queue an ABORT messa
ge
May 9 21:12:57 ptecdev1 kernel: (scsi0:A:6:0): Queuing a recovery SCB
May 9 21:12:57 ptecdev1 kernel: scsi0:0:6:0: Device is disconnected, re-queuing
SCB
May 9 21:12:57 ptecdev1 kernel: Recovery code sleeping
May 9 21:12:57 ptecdev1 kernel: (scsi0:A:6:0): Abort Tag Message Sent
May 9 21:12:57 ptecdev1 kernel: (scsi0:A:6:0): SCB 5 - Abort Tag Completed.
May 9 21:12:57 ptecdev1 kernel: Recovery SCB completes
May 9 21:12:57 ptecdev1 kernel: Recovery code awake
May 9 21:12:57 ptecdev1 kernel: aic7xxx_abort returns 8194
--
Steven J. Hill - Embedded SW Engineer
Public Key: 'http://www.cotw.com/pubkey.txt'
FPR1: E124 6E1C AF8E 7802 A815
FPR2: 7D72 829C 3386 4C4A E17D
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-05-10 2:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-05-10 2:49 Bad aic7xxx driver or bad harddisk? Steven J. Hill
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.