ethernet still quits

ethernet still quits

[Roeland Th. Jansen]

2.4.5 :

when quote some xfers have taken place, the realtek card dies here.

Jun  1 14:58:12 grobbebol kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jun  1 14:58:12 grobbebol kernel: eth0: Tx timed out, lost interrupt?  TSR=0x3, ISR=0x3, t=1303.
Jun  1 14:58:14 grobbebol kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jun  1 14:58:14 grobbebol kernel: eth0: Tx timed out, lost interrupt?  TSR=0x3, ISR=0x3, t=103.
Jun  1 14:58:28 grobbebol kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jun  1 14:58:28 grobbebol kernel: eth0: Tx timed out, lost interrupt?  TSR=0x3, ISR=0x3, t=103.
Jun  1 14:58:30 grobbebol kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jun  1 14:58:30 grobbebol kernel: eth0: Tx timed out, lost interrupt?  TSR=0x3, ISR=0x3, t=123.
Jun  1 14:58:32 grobbebol kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jun  1 14:58:32 grobbebol kernel: eth0: Tx timed out, lost interrupt?  TSR=0x3, ISR=0x3, t=103.

etc. only rebooting helps.

hardware BP6, non OC, happens with older kernels as well sometimes.


-- 
Grobbebol's Home                   |  Don't give in to spammers.   -o)
http://www.xs4all.nl/~bengel       | Use your real e-mail address   /\
Linux 2.2.16 SMP 2x466MHz / 256 MB |        on Usenet.             _\_v  

Re: ethernet still quits

[Jeff Garzik]

"Roeland Th. Jansen" wrote:
> when quote some xfers have taken place, the realtek card dies here.

Working on the problem.  You'll need to downgrade the 8139too driver to
the current 'ac' patches or a previous version on
http://sf.net/projects/gkernel/ temporarily.

-- 
Jeff Garzik      | Disbelief, that's why you fail.
Building 1024    |
MandrakeSoft     |

Re: ethernet still quits

[Danny ter Haar]

Jeff Garzik  <jgarzik@mandrakesoft.com> wrote:
>Working on the problem.  You'll need to downgrade the 8139too driver to
>the current 'ac' patches or a previous version on
>http://sf.net/projects/gkernel/ temporarily.

also on :
www.bzimage.org/kernel-patches/v2.4/alan/v2.4.5/

8139_too_work.c (62kB)

And also there:

patch-2.4.5-ac6-crypto.bz2 (268kB)


Danny



-- 
Holland Hosting
www.hoho.nl      info@hoho.nl

Re: ethernet still quits

[Jeff Garzik]

Danny ter Haar wrote:
> 
> Jeff Garzik  <jgarzik@mandrakesoft.com> wrote:
> >Working on the problem.  You'll need to downgrade the 8139too driver to
> >the current 'ac' patches or a previous version on
> >http://sf.net/projects/gkernel/ temporarily.
> 
> also on :
> www.bzimage.org/kernel-patches/v2.4/alan/v2.4.5/
> 
> 8139_too_work.c (62kB)

That's fine, it is a previous version (0.9.15c).  Note that the current
(broken) 8139too works for some people where earlier versions don't, so
obviously you should not downgrade unless you are having problems.

> And also there:
> 
> patch-2.4.5-ac6-crypto.bz2 (268kB)

What's that?

-- 
Jeff Garzik      | Disbelief, that's why you fail.
Building 1024    |
MandrakeSoft     |

Re: ethernet still quits

[Roeland Th. Jansen]

On Fri, Jun 01, 2001 at 03:45:46PM +0000, Danny ter Haar wrote:
> >the current 'ac' patches or a previous version on
> >http://sf.net/projects/gkernel/ temporarily.
> 
> also on :
> www.bzimage.org/kernel-patches/v2.4/alan/v2.4.5/
> 
> 8139_too_work.c (62kB)
> 
> And also there:
> 
> patch-2.4.5-ac6-crypto.bz2 (268kB)

Thanks Jeff and Danny. you're a help !

-- 
Grobbebol's Home                   |  Don't give in to spammers.   -o)
http://www.xs4all.nl/~bengel       | Use your real e-mail address   /\
Linux 2.2.16 SMP 2x466MHz / 256 MB |        on Usenet.             _\_v