From: Bill Ellis <bill_ellis@legis.state.ak.us>
To: linux-lvm@sistina.com
Subject: Re: [linux-lvm] pvcreate fails on a software RAID metadisk
Date: Thu, 04 Oct 2001 11:59:03 -0800 [thread overview]
Message-ID: <3BBCBF87.5520C8F9@legis.state.ak.us> (raw)
In-Reply-To: 3BBC8B5B.1A484028@legis.state.ak.us
Hi again,
Some more playing around led me to discover that 'lvmdiskscan' is also not
recognizing my software RAID metadisks correctly. Here's what I think are the
relevant portions of the ~5600 lines of output from the 'lvmdiskscan -d -v'
command:
<1> lvm_dir_cache -- CALLED
<22> lvm_add_dir_cache -- CALLED with /dev/md3
...
<22> lvm_add_dir_cache -- CALLED with /dev/md7
<333> lvm_check_dev -- CALLED
<4444> lvm_check_partitioned_dev -- CALLED
<55555> lvm_get_device_type called
<55555> lvm_get_device_type leaving with 2
<4444> lvm_check_partitioned_dev -- LEAVING with ret: TRUE
<333> lvm_check_dev -- LEAVING with ret: 1
<22> lvm_add_dir_cache -- LEAVING with ret: ADDED
...
<1> pv_get_size -- CALLED with /dev/md7 and 0xbffff8ac
<22> lvm_dir_cache -- CALLED
<22> lvm_dir_cache -- LEAVING with ret: 50
<22> lvm_dir_cache_find -- CALLED with /dev/md7
<333> pv_check_name -- CALLED with "/dev/md7"
<4444> lvm_check_chars -- CALLED with name: "/dev/md7"
<4444> lvm_check_chars -- LEAVING with ret: 0
<4444> lvm_check_dev -- CALLED
<55555> lvm_check_partitioned_dev -- CALLED
<666666> lvm_get_device_type called
<666666> lvm_get_device_type leaving with 2
<55555> lvm_check_partitioned_dev -- LEAVING with ret: TRUE
<4444> lvm_check_dev -- LEAVING with ret: 1
<333> pv_check_name -- LEAVING with ret: 0
<333> lvm_dir_cache -- CALLED
<333> lvm_dir_cache -- LEAVING with ret: 50
<22> lvm_dir_cache_find -- LEAVING with entry: 4
<22> lvm_check_partitioned_dev -- CALLED
<333> lvm_get_device_type called
<333> lvm_get_device_type leaving with 2
<22> lvm_check_partitioned_dev -- LEAVING with ret: TRUE
<22> lvm_partition_count -- CALLED for 0x907
<333> lvm_get_device_type called
<333> lvm_get_device_type leaving with 2
<22> lvm_partition_count -- LEAVING with ret: 16
<1> pv_get_size -- LEAVING with ret: 0
...
lvmdiskscan -- reading all disks / partitions (this may take a while...)
lvmdiskscan -- filling directory cache...
lvmdiskscan -- walking through all found disks / partitions
lvmdiskscan -- /dev/md3 [ 0] Primary [0x07]
lvmdiskscan -- /dev/md4 [ 0] Primary [0x07]
lvmdiskscan -- /dev/md5 [ 0] Extended [0x07]
lvmdiskscan -- /dev/md6 [ 0] Extended [0x07]
lvmdiskscan -- /dev/md7 [ 0] Extended [0x07]
lvmdiskscan -- /dev/sda1 [ 19.98 MB] Primary LINUX native partition
[0x83]
lvmdiskscan -- /dev/sda2 [ 80.00 MB] Primary LINUX swap partition [0x82]
lvmdiskscan -- /dev/sda3 [ 5.76 GB] Primary [0xFD]
lvmdiskscan -- /dev/sda4 [ 28.34 GB] DOS extended partition [0x05]
lvmdiskscan -- /dev/sda5 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sda6 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sda7 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sda8 [ 5.86 GB] Extended LVM partition [0x8E]
lvmdiskscan -- /dev/sdb1 [ 19.98 MB] Primary LINUX native partition
[0x83]
lvmdiskscan -- /dev/sdb2 [ 80.00 MB] Primary LINUX swap partition [0x82]
lvmdiskscan -- /dev/sdb3 [ 5.76 GB] Primary [0xFD]
lvmdiskscan -- /dev/sdb4 [ 28.34 GB] DOS extended partition [0x05]
lvmdiskscan -- /dev/sdb5 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdb6 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdb7 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdb8 [ 5.86 GB] Extended LVM partition [0x8E]
lvmdiskscan -- /dev/sdc1 [ 19.98 MB] Primary LINUX native partition
[0x83]
lvmdiskscan -- /dev/sdc2 [ 80.00 MB] Primary LINUX swap partition [0x82]
lvmdiskscan -- /dev/sdc3 [ 5.76 GB] Primary [0xFD]
lvmdiskscan -- /dev/sdc4 [ 28.34 GB] DOS extended partition [0x05]
lvmdiskscan -- /dev/sdc5 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdc6 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdc7 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdc8 [ 5.86 GB] Extended LINUX native partition
[0x83]
lvmdiskscan -- /dev/sdd1 [ 19.98 MB] Primary LINUX native partition
[0x83]
lvmdiskscan -- /dev/sdd2 [ 80.00 MB] Primary LINUX swap partition [0x82]
lvmdiskscan -- /dev/sdd3 [ 5.76 GB] Primary [0xFD]
lvmdiskscan -- /dev/sdd4 [ 28.34 GB] DOS extended partition [0x05]
lvmdiskscan -- /dev/sdd5 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdd6 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdd7 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sdd8 [ 5.86 GB] Extended LINUX native partition
[0x83]
lvmdiskscan -- /dev/sde1 [ 19.98 MB] Primary LINUX native partition
[0x83]
lvmdiskscan -- /dev/sde2 [ 80.00 MB] Primary LINUX swap partition [0x82]
lvmdiskscan -- /dev/sde3 [ 5.76 GB] Primary LINUX native partition
[0x83]
lvmdiskscan -- /dev/sde4 [ 28.34 GB] DOS extended partition [0x05]
lvmdiskscan -- /dev/sde5 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sde6 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sde7 [ 5.86 GB] Extended [0xFD]
lvmdiskscan -- /dev/sde8 [ 5.86 GB] Extended LINUX native partition
[0x83]
lvmdiskscan -- 5 disks
lvmdiskscan -- 0 whole disks
lvmdiskscan -- 0 loop devices
lvmdiskscan -- 0 multiple devices
lvmdiskscan -- 0 network block devices
lvmdiskscan -- 45 partitions
lvmdiskscan -- 2 LVM physical volume partitions
Again, if anyone can give me any leads as to what might be going wrong here,
I'd appreciate it. Also, if there is any more information I can provide on
this matter, just let me know...
Thanks,
Bill
next prev parent reply other threads:[~2001-10-04 19:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-04 16:16 [linux-lvm] pvcreate fails on a software RAID metadisk Bill Ellis
2001-10-04 19:59 ` Bill Ellis [this message]
2001-10-04 20:46 ` Andreas Dilger
2001-10-05 8:30 ` Luca Berra
2001-10-05 9:31 ` Andreas Dilger
2001-10-05 9:13 ` yves.alloyer
2001-10-05 19:31 ` Luca Berra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BBCBF87.5520C8F9@legis.state.ak.us \
--to=bill_ellis@legis.state.ak.us \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.