* Small bug with ZYNX 4-Port NIC (Tulip driver)
@ 2001-10-23 20:35 Ben Greear
0 siblings, 0 replies; only message in thread
From: Ben Greear @ 2001-10-23 20:35 UTC (permalink / raw)
To: linux-kernel, Tulip Mailing List
Regarding the tulip driver that comes default with 2.4.13-pre5:
There seems to be a problem with the ZYNX 4-port NIC.
It auto-negotiates and brings it's link up, but it's
advertise bits are set to (only) 10bt-FD. If I force the
bits to 10/100 FD/HD (all 4 set, in other words), then the
NIC briefly reports this setting (while LINK is DOWN), but
as soon as it completes it's autonegotiation, the advert
bits are once again set to 10bt-FD.
I do NOT see this problem on the D-LINK 4-port NIC or the
EEPRO NICs I've been testing with....
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
President of Candela Technologies Inc http://www.candelatech.com
ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-10-23 20:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-10-23 20:35 Small bug with ZYNX 4-Port NIC (Tulip driver) Ben Greear
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.