[parisc-linux] TOC on B180L

[parisc-linux] TOC on B180L

[joel.soete]

Hi Grant,

On my B180L the TOC blue button is located (on the back of the 'server') just
between the keyboard connector and the video connector. (On all we have here,
the button is located at the same place).

Joel

PS: Is this interrupt will be consider as a hardware reset by linux kernel? (I
never try it because LKCD is not yet available)
 

-------------------------------------------------
This mail sent through Tiscali Webmail (http://webmail.tiscali.be)

Re: [parisc-linux] TOC on B180L

[Grant Grundler]

joel.soete@freebel.net wrote:
> On my B180L the TOC blue button is located (on the back of the 'server') just
> between the keyboard connector and the video connector. (On all we have here,
> the button is located at the same place).

thanks - should be the same place for all B-xxx machines.

> PS: Is this interrupt will be consider as a hardware reset by linux kernel?

I don't know...I expect it be treated like an HPMC (or NMI)...which
depending on how the HW has locked up...

[parisc-linux] 0.93 installations on N-Class.,

[Gururaj Ananthateerta]

.93 installation woriking fine on n-class.


uname -a
Linux hpntc668 2.4.9-64 #1 Fri Nov 30 20:18:56 MST 2001 parisc64 unknown



-----------------dmesg -output---------------------------------------------
Linux version 2.4.9-64 (root@paer) (gcc version 3.0) #1 Fri Nov 30 20:18:56 MST
2001
FP[0] enabled: Rev 1 Model 16
The 64-bit Kernel has started...
Determining PDC firmware type: 64 bit PAT.
model   00005d30 00000491 00000000 00000002 270f3a47 100000f0 00000008 000000b2
000000b2
vers    00000300
cpuid   0000024a
CPUID   vers 18 rev 10
model   9000/800/N4000-55
Total Memory: 2048 Mb
pagetable_init
On node 0 totalpages: 524288
zone(0): 524288 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda4 HOME=/ console=ttyS0 TERM=vt102
Console: colour dummy device 160x64
Calibrating delay loop... 1097.72 BogoMIPS
Memory: 2023968k available
Dentry-cache hash table entries: 131072 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 32768 (order: 7, 524288 bytes)
Buffer-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Searching for devices...
Found devices:
1. Prelude SMC Memory (1) at 0xfffffffffedc0000 [-64], versions 0x90, 0x0, 0x9
2. IKE I/O Bus Converter Merced Port (7) at 0xfffffffffed00000 [0], versions
0x803, 0x0, 0xc
3. Elroy PCI Bridge (13) at 0xffffffffbffe0000 [0/0], versions 0x782, 0x0, 0xa
4. Elroy PCI Bridge (13) at 0xffffffffbffe2000 [0/1], versions 0x782, 0x0, 0xa
5. Elroy PCI Bridge (13) at 0xffffffffbffe4000 [0/2], versions 0x782, 0x0, 0xa
6. Elroy PCI Bridge (13) at 0xffffffffbffe8000 [0/4], versions 0x782, 0x0, 0xa
7. Elroy PCI Bridge (13) at 0xffffffffbffea000 [0/5], versions 0x782, 0x0, 0xa
8. Elroy PCI Bridge (13) at 0xffffffffbfff0000 [0/8], versions 0x782, 0x0, 0xa
9. Elroy PCI Bridge (13) at 0xffffffffbfff4000 [0/10], versions 0x782, 0x0, 0xa
10. Elroy PCI Bridge (13) at 0xffffffffbfff8000 [0/12], versions 0x782, 0x0, 0xa
11. IKE I/O Bus Converter Merced Port (7) at 0xfffffffffed40000 [1], versions
0x803, 0x0, 0xc
12. Elroy PCI Bridge (13) at 0xfffffffffece0000 [1/0], versions 0x782, 0x0, 0xa
13. Elroy PCI Bridge (13) at 0xfffffffffece4000 [1/2], versions 0x782, 0x0, 0xa
14. Elroy PCI Bridge (13) at 0xfffffffffece8000 [1/4], versions 0x782, 0x0, 0xa
15. Elroy PCI Bridge (13) at 0xfffffffffecf0000 [1/8], versions 0x782, 0x0, 0xa
16. Elroy PCI Bridge (13) at 0xfffffffffecf4000 [1/10], versions 0x782, 0x0, 0xa
17. Elroy PCI Bridge (13) at 0xfffffffffecf8000 [1/12], versions 0x782, 0x0, 0xa
18. DEW BC Runway Port (7) at 0xfffffffffed20000 [32], versions 0x584, 0x0, 0xc
19. Prelude W+ 540 (0) at 0xfffffffffed21000 [33], versions 0x5d3, 0x0, 0x4
20. DEW BC Runway Port (7) at 0xfffffffffed24000 [36], versions 0x584, 0x0, 0xc
21. Prelude W+ 540 (0) at 0xfffffffffed25000 [37], versions 0x5d3, 0x0, 0x4
22. DEW BC Runway Port (7) at 0xfffffffffed28000 [40], versions 0x584, 0x0, 0xc
23. Prelude W+ 540 (0) at 0xfffffffffed29000 [41], versions 0x5d3, 0x0, 0x4
24. DEW BC Runway Port (7) at 0xfffffffffed2c000 [44], versions 0x584, 0x0, 0xc
25. Prelude W+ 540 (0) at 0xfffffffffed2d000 [45], versions 0x5d3, 0x0, 0x4
26. DEW BC Runway Port (7) at 0xfffffffffed60000 [96], versions 0x584, 0x0, 0xc
27. Prelude W+ 540 (0) at 0xfffffffffed61000 [97], versions 0x5d3, 0x0, 0x4
28. DEW BC Runway Port (7) at 0xfffffffffed64000 [100], versions 0x584, 0x0, 0xc
29. Prelude W+ 540 (0) at 0xfffffffffed65000 [101], versions 0x5d3, 0x0, 0x4
CONFIG_SMP=n  ignoring additional CPUs
Warning : device (0, 0x5d3, 0x0, 0x4) NOT claimed by CPU
CONFIG_SMP=n  ignoring additional CPUs
Warning : device (0, 0x5d3, 0x0, 0x4) NOT claimed by CPU
CONFIG_SMP=n  ignoring additional CPUs
Warning : device (0, 0x5d3, 0x0, 0x4) NOT claimed by CPU
CONFIG_SMP=n  ignoring additional CPUs
Warning : device (0, 0x5d3, 0x0, 0x4) NOT claimed by CPU
CONFIG_SMP=n  ignoring additional CPUs
Warning : device (0, 0x5d3, 0x0, 0x4) NOT claimed by CPU
CPU(s): 1 x PA8600 (PCX-W+) at 550.000000 MHz
SBA found Ike rev 2 at 0xfffffffffed00000
SBA found Ike rev 2 at 0xfffffffffed40000
lba version TR2.2 (0x3) found at 0xffffffffbffe0000
lba range[2] : ignoring GMMIO (0xfffffff004000000)
  got res[100:1ff] for resource 0 of Symbios Logic Inc. (formerly NCR) 53c895
  got res[200:2ff] for resource 0 of Symbios Logic Inc. (formerly NCR) 53c875
  got res[300:3ff] for resource 0 of Symbios Logic Inc. (formerly NCR) 53c875
(#2)
  got res[80:ff] for resource 0 of Digital Equipment Corporation DECchip 21142/43

  got res[40:7f] for resource 1 of PCI device 103c:1048 (Hewlett-Packard Company)

  got res[400:43f] for resource 1 of PCI device 103c:1048 (Hewlett-Packard
Company)
  got res[ffffffff80040000:ffffffff8007ffff] for resource 6 of Digital Equipment
Corporation DECchip 21142/43
  got res[ffffffff80001000:ffffffff80001fff] for resource 2 of Symbios Logic Inc.
(formerly NCR) 53c895
  got res[ffffffff80002000:ffffffff80002fff] for resource 2 of Symbios Logic Inc.
(formerly NCR) 53c875
  got res[ffffffff80003000:ffffffff80003fff] for resource 0 of PCI device
103c:1048 (Hewlett-Packard Company)
  got res[ffffffff80004000:ffffffff800043ff] for resource 1 of Digital Equipment
Corporation DECchip 21142/43
  got res[ffffffff80005000:ffffffff800050ff] for resource 1 of Symbios Logic Inc.
(formerly NCR) 53c895
  got res[ffffffff80006000:ffffffff800060ff] for resource 1 of Symbios Logic Inc.
(formerly NCR) 53c875
lba version TR2.2 (0x3) found at 0xffffffffbffe2000
lba range[2] : ignoring GMMIO (0xfffffff084000000)
lba version TR3.0 (0x4) found at 0xffffffffbffe4000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff104000000)
lba version TR3.0 (0x4) found at 0xffffffffbffe8000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff204000000)
lba version TR3.0 (0x4) found at 0xffffffffbffea000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff284000000)
lba version TR3.0 (0x4) found at 0xffffffffbfff0000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff404000000)
lba version TR3.0 (0x4) found at 0xffffffffbfff4000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff504000000)
lba version TR3.0 (0x4) found at 0xffffffffbfff8000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff604000000)
lba version TR3.0 (0x4) found at 0xfffffffffece0000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff804000000)
lba version TR3.0 (0x4) found at 0xfffffffffece4000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffff904000000)
lba version TR3.0 (0x4) found at 0xfffffffffece8000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffffa04000000)
lba version TR3.0 (0x4) found at 0xfffffffffecf0000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffffc04000000)
lba version TR3.0 (0x4) found at 0xfffffffffecf4000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffffd04000000)
lba version TR3.0 (0x4) found at 0xfffffffffecf8000
kernel BUG at lba_pci.c:1262!
kernel BUG at lba_pci.c:1288!
lba range[2] : ignoring GMMIO (0xfffffffe04000000)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Performance monitoring counters enabled for Prelude W+ 540
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (4156,4168,4156,4169)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS00 at port 0x0040 (irq = 132) is a 16550A
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (4156,4168,4156,4170)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS01 at port 0x0400 (irq = 133) is a 16550A
request_module[parport_lowlevel]: Root fs not mounted
lp: driver loaded but no devices found
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
tulip0: no phy info, aborting mtable build
tulip0:  MII transceiver #1 config 1000 status 782d advertising 0061.
eth0: Digital DS21143 Tulip rev 65 at 0x80, 00:10:83:F5:85:5B, IRQ 128.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 2, function 0
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 0, device 2, function 1
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 0, device 1, function 0
sym53c8xx: 53c895 detected
sym53c875-0: rev 0x14 on pci bus 0 device 2 function 0 irq 130
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-1: rev 0x14 on pci bus 0 device 2 function 1 irq 131
sym53c875-1: ID 7, Fast-20, Parity Checking
sym53c895-2: rev 0x1 on pci bus 0 device 1 function 0 irq 129
sym53c895-2: ID 7, Fast-40, Parity Checking
sym53c895-2: SCSI bus mode change from 80 to 80.
scsi0 : sym53c8xx-1.7.3c-20010512
scsi1 : sym53c8xx-1.7.3c-20010512
scsi2 : sym53c8xx-1.7.3c-20010512
  Vendor: SEAGATE   Model: ST39103LC         Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: SEAGATE   Model: ST39175LW         Rev: HP03
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 6, lun 0
Attached scsi disk sdb at scsi2, channel 0, id 6, lun 0
sym53c875-1-<6,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 15)
SCSI device sda: 17783112 512-byte hdwr sectors (9105 MB)
Partition check:
 sda: sda1 sda2 sda3 sda4
sym53c895-2-<6,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 15)
SCSI device sdb: 17783112 512-byte hdwr sectors (9105 MB)
 sdb: unknown partition table
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 249848k swap-space (priority -1)
eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.

Re: [parisc-linux] 0.93 installations on N-Class.,

[Matthew Wilcox]

On Fri, Mar 15, 2002 at 10:40:50AM -0800, Gururaj Ananthateerta wrote:
> .93 installation woriking fine on n-class.

So if you compile a 64-bit, CONFIG_SMP=n kernel from head of CVS, does
that also work on your N class?

-- 
Revolutions do not require corporate support.

[parisc-linux] code to handle disk partitions.

[Gururaj Ananthateerta]

where is this function
get_all_partitions()

can it be still used.

I am looking partition handling functions,  I got some stuff in
/drivers/block/blkpg.c

Re: [parisc-linux] code to handle disk partitions.

[Matthew Wilcox]

On Fri, Mar 15, 2002 at 10:28:29PM -0800, Gururaj Ananthateerta wrote:
> 
> where is this function
> get_all_partitions()
> 
> can it be still used.

my impression is this function has never existed.  it certainly has not
been removed during the 2.4 kernel series.

> I am looking partition handling functions,  I got some stuff in
> /drivers/block/blkpg.c

I think you probably want to start looking in fs/partitions/check.c,
function grok_partitions().

-- 
Revolutions do not require corporate support.

[parisc-linux] ftp Client.

[Gururaj Ananthateerta]

compile and use this ftp client

http://www.NcFTP.com

working fine for me.

[parisc-linux] Call to IODC hangs.!!!!

[Gururaj Ananthateerta]

I am using the following code to write a page to the swap space
using the iodc calls.

The IODC call for writing a boot device in blocks is
ENTRY_IO  with a subfunction BOOT_BLK_DEV_WRITE  = 17.

The call never returns.
Is there anythin I need to do more...


-------------------------------PARTITION TABLE Start -----------------
This is the partition of my disk.

Disk /dev/sda: 67 heads, 62 sectors, 1009 cylinders
Units = sectors of 1 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sda1            62     33231     16585   f0  Linux/PA-RISC boot
/dev/sda2         33232    531711    249240   82  Linux swap
/dev/sda3        531712   1030191    249240   83  Linux
/dev/sda4       1030192   4191385   1580597   83  Linux
-------------------------------------------PARTITION TABLE End-----------------

-------------------------CALL to Firmware.c-----------------------------
I am calling a pdc_iodc_bootout() as below.

err = pdc_iodc_bootout((unsigned long)17014784, dump_page_buf,
                                1, &count);

17014784  is the start of the swap space.
                     I got this number by doing this.
Start sector of the swap partition * 512
33232 * 512 = 17014784


-------------------------------------------------------------END calling
-------------


---------------------------------------Call to
IODC------------------------------
This is the call to IODC

int
pdc_iodc_bootout(unsigned devaddr, char *memaddr, unsigned size,
                 unsigned *count)
{
    int r;

    static int __attribute__((aligned(8)))   iodc_retbuf[32];
    static char __attribute__((aligned(64))) iodc_dbuf[4096];
    memcpy(iodc_dbuf, memaddr, size);

    if(!(PAGE0->mem_boot.iodc_io)) {
        return -1;
    }

    r = real32_call(PAGE0->mem_boot.iodc_io,
                    (unsigned long)PAGE0->mem_boot.hpa,
ENTRY_IO_BLK_BOOTOUT,
                    PAGE0->mem_boot.spa, __pa(PAGE0->mem_boot.dp.layers),
                    __pa(iodc_retbuf), devaddr, __pa(iodc_dbuf), size,
size);
    memcpy(count, iodc_retbuf, sizeof(*count));

    if (r == 3) /* EOF */
    {
        printk("pdc_iodc_bootin:EOF\n");
        return 0;                       /* count = 0 at EOF */
    }
    else if (r >= 0)
    {
        convert_to_wide(pdc_result);
        return pdc_result[0];           /* count */
    }
    return r;                           /* r < 0; error */
}

Re: [parisc-linux] ftp Client.

[Matthew Wilcox]

On Mon, Mar 18, 2002 at 03:31:48PM -0800, Gururaj Ananthateerta wrote:
> compile and use this ftp client
> 
> http://www.NcFTP.com
> 
> working fine for me.

Or, more easily, "apt-get install ncftp".  The joys of a distro where
_everything_ is packaged :-)

-- 
Revolutions do not require corporate support.