AW: I need help getting pcmcia working with a FADS board

AW: I need help getting pcmcia working with a FADS board

[Fend, Matthias]

if we talk about  m8xx_pcmcia_kernel-2.4.-19pre6.patch the patch does this:

- add the file m8xx_pcmcia.c into your kernel driver tree ( ...
/drivers/pcmcia/m8xx_pcmcia.c )
- add a entry for the new file into Config.in
- add a entry for the new file into Makefile

thats all

the patch was made from linuxppc_2_4_devel - but you can do these few changes
manually...

matthias

> -----Ursprüngliche Nachricht-----
> Von:	Jacky Wang [SMTP:jacky@premierme.com.tw]
> Gesendet am:	Mittwoch, 24. April 2002 12:51
> An:	boehringer@snom.de
> Cc:	May Ling List
> Betreff:	RE: I need help getting pcmcia working with a FADS board
>
>
> Sven,
>
> what does it patch for?
> 	which kernel source?
> 	or which pcmcia-cs source?
>
> Jacky
>
> > -----Original Message-----
> > From: owner-linuxppc-embedded@lists.linuxppc.org
> > [mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of
> > Sven Boehringer
> > Sent: Tuesday, April 23, 2002 2:26 PM
> > To: Jacky Wang
> > Cc: May Ling List
> > Subject: Re: I need help getting pcmcia working with a FADS board
> >
> >
> > Hi Jacky,
> >
> > Matthew provided me with a patch for getting the pcmcia working.
> > I still have not enough time to test that patch. Here it goes:
> >
> >
> > Regards,
> >
> > 	Sven
> >
> >
> > Jacky Wang wrote:
> > >
> > > Hi everyone,
> > >
> > > I need help getting pcmcia working with a FADS board.
> > >
> > > Did someone finish the driver?
> > > If Yes, would you mind to share it with me?
> > >
> > > Jacky
> > >
> >
> >
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: AW: I need help getting pcmcia working with a FADS board

[Sven Boehringer]

[-- Attachment #1: Type: text/plain, Size: 1660 bytes --]

Hi,

i'm still struggling with mpc8xxfads & MPC855T & NE2K-PCMCIA. I patched
the 2.4.18 manually and compiled all the driver options into the kernel
(no modules).

AFAIK the driver doesn't setup the ethernet-device, cause ifconfig eth1
... up says "no such interface".

When i run the "dump_cis" program i get following output:

Socket 0:
  dev_info
    fn_specific 100ns, 16kb
    FLASH 150ns, 60kb
  attr_dev_info
    FLASH 150ns, 4kb
  manfid 0x0149, 0xc1ab
  vers_1 4.1, "Ethernet", "Adapter", "2.0"
  config base 0x0fd0 mask 0x000b last_index 0x06
  cftable_entry 0x00 [default]
    [mwait]
    io 0x0000-0x001f [lines=5] [16bit]
    irq mask 0xbefc [level]
  cftable_entry 0x01
    io 0x0300-0x031f [lines=10] [16bit] [range]
  cftable_entry 0x02
    io 0x0320-0x033f [lines=10] [16bit] [range]
  cftable_entry 0x03
    io 0x0340-0x035f [lines=10] [16bit] [range]
  cftable_entry 0x04
    io 0x0380-0x039f [lines=10] [16bit] [range]
  cftable_entry 0x05
    io 0x0200-0x021f [lines=10] [16bit] [range]
  funcid network_adapter

so far not bad? But when i run "dump_cisreg":

Socket 0 function 0:
  Config register base = 0x0fd0, mask = 0x000b
  read config register: Invalid argument

:-(


Can somebody help me?

Regards,
	Sven


"Fend, Matthias" wrote:
>
> if we talk about  m8xx_pcmcia_kernel-2.4.-19pre6.patch the patch does this:
>
> - add the file m8xx_pcmcia.c into your kernel driver tree ( ...
> /drivers/pcmcia/m8xx_pcmcia.c )
> - add a entry for the new file into Config.in
> - add a entry for the new file into Makefile
>
> thats all
>
> the patch was made from linuxppc_2_4_devel - but you can do these few changes
> manually...
>
> matthias

[-- Attachment #2: boot_log_pcmcia_ne2k --]
[-- Type: text/plain, Size: 2866 bytes --]

eth0: FEC ENET Version 0.2, FEC irq 3, MII irq 4, addr 00:04:13:00:00:01
Linux Kernel Card Services 3.1.22
  options:  none
m8xx_pcmcia: Version 0.05, 14-Apr-2002
cs: CardServices(GetCardServicesInfo, 0xc0197f88, 0x00000001)
m8xx_pcmcia: FADS using SLOT_A with IRQ 13.
m8xx_pcmcia: Socket 0: MemWin 0: Base 0xe0000000.
m8xx_pcmcia: Socket 0: MemWin 1: Base 0xe4000000.
m8xx_pcmcia: Socket 0: MemWin 2: Base 0xe8000000.
m8xx_pcmcia: Socket 0: MemWin 3: Base 0xec000000.
m8xx_pcmcia: Socket 0: MemWin 4: Base 0xf0000000.
m8xx_pcmcia: sock_init(0)
m8xx_pcmcia: SetSocket(0, flags 0x000, Vcc 0, Vpp 0, io_irq 0, csc_mask 0x80)
m8xx_pcmcia: SetIOMap(0, 0, 0x00, 0 ns, 0x0000-0x0001)
m8xx_pcmcia: SetIOMap(0, 1, 0x00, 0 ns, 0x0000-0x0001)
m8xx_pcmcia: SetMemMap(0, 0, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: Socket 0: Mapped memory window 0 at 0xe0000000, OR = 0xb8000000.
m8xx_pcmcia: SetMemMap(0, 0, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: SetMemMap(0, 1, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: Socket 0: Mapped memory window 1 at 0xe4000000, OR = 0xb8000000.
m8xx_pcmcia: SetMemMap(0, 1, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: SetMemMap(0, 2, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: Socket 0: Mapped memory window 2 at 0xe8000000, OR = 0xb8000000.
m8xx_pcmcia: SetMemMap(0, 2, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: SetMemMap(0, 3, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: Socket 0: Mapped memory window 3 at 0xec000000, OR = 0xb8000000.
m8xx_pcmcia: SetMemMap(0, 3, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: SetMemMap(0, 4, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
m8xx_pcmcia: Socket 0: Mapped memory window 4 at 0xf0000000, OR = 0xb8000000.
m8xx_pcmcia: SetMemMap(0, 4, 0x00, 0 ns, 0x00000-0x01000, 0x00000)
pcnet_cs.c 1.144 2001/11/07 04:06:56 (David Hinds)
cs: CardServices(GetCardServicesInfo, 0xc0197f98, 0x00000001)
After calling CardServices: 0
ds: register_pccard_driver('pcnet_cs')
After calling return_register: 0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
IP-Config: Complete:
      device=eth0, addr=192.168.0.18, mask=255.255.255.0, gw=192.168.0.1,
     host=fads, domain=, nis-domain=intern.snom.de,
     bootserver=192.168.0.9, rootserver=192.168.0.44, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds.c 1.112 2001/10/13 00:08:28 (David Hinds)
m8xx_pcmcia: GetStatus(0) = 0xb1
m8xx_pcmcia: GetStatus(0) = 0xb1
m8xx_pcmcia: SetSocket(0, flags 0x000, Vcc 50, Vpp 50, io_irq 0, csc_mask 0x80)
m8xx_pcmcia: SetSocket(0, flags 0x240, Vcc 50, Vpp 50, io_irq 0, csc_mask 0x80)
m8xx_pcmcia: SetSocket(0, flags 0x200, Vcc 50, Vpp 50, io_irq 0, csc_mask 0x80)
m8xx_pcmcia: GetStatus(0) = 0x1f0
ds: ds_event(0x000004, 0, 0xc01b1660)