tftp on ppcboot 1.1.5

tftp on ppcboot 1.1.5

[gao xiaoguo]

I want to use tftp to download file into target machine,but always failed.
The tftp server on linux has already been setup and tested, I tftp a file successfully
by using other tftp client on windows.

Following is my environment and operation log, and I found the ip/udp datagram on network
really is 0.0.0.69->192.168.1.105,so nobody will answer to the tftp request. Why the
ip address of server is changed from 192.168.1.105 to 0.0.0.69 ? Are there something
I leave.

CPU:   XPC860xxZPnnD3 at 48 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev ENG or PILOT
DRAM:  (4 MB SDRAM)  8 MB
FLASH:  2 MB

=>printenv

bootargs=
bootcmd=bootm 2800100
baudrate=115200
loads_echo=1
clocks_in_mhz=1
ethaddr=00:00:00:01:02:03
serverip=192.168.1.105
ipaddr=192.168.1.99
netmask=255.255.255.0

=>tftpt\b \bboot 100000 testfile

ARP broadcast 1

Retry count exceeded; starting again
ARP broadcast 1
TFTP from server 192.168.1.105; our IP address is 192.168.1.99
Filename 'testfile'.
Load address: 0x100000
Loading: *\bT T T T
Retry count exceeded; starting again

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: tftp on ppcboot 1.1.5

[Arun Dharankar]

Following is different in my case (8260ADS board):
- Load address is 0x500000 (this may not be a problem)
- ethaddr is 00:11:22:33:44:55 (this prevented tftp in my case
   with similar symptoms as you describe if I used
   a1:b2:c3:d4:e5:c6, and I dont know why, and could
   be the problem in your case)
- tftp server has full path in inetd.conf; i.e. in.tftpd -s /tftpboot
  and then use tftp 0x500000 /tftpboot/testfile (this may not
  be a problem)
- Another possibility (as in my case of another similar board),
  the board was not setup properly in start.S.




On Wednesday 15 May 2002 04:46 am, gao xiaoguo wrote:
> I want to use tftp to download file into target machine,but always failed.
> The tftp server on linux has already been setup and tested, I tftp a file
> successfully by using other tftp client on windows.
>
> Following is my environment and operation log, and I found the ip/udp
> datagram on network really is 0.0.0.69->192.168.1.105,so nobody will answer
> to the tftp request. Why the ip address of server is changed from
> 192.168.1.105 to 0.0.0.69 ? Are there something I leave.
>
> CPU:   XPC860xxZPnnD3 at 48 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
> Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev ENG or PILOT
> DRAM:  (4 MB SDRAM)  8 MB
> FLASH:  2 MB
>
> =>printenv
>
> bootargs=
> bootcmd=bootm 2800100
> baudrate=115200
> loads_echo=1
> clocks_in_mhz=1
> ethaddr=00:00:00:01:02:03
> serverip=192.168.1.105
> ipaddr=192.168.1.99
> netmask=255.255.255.0
>
> =>tftpt boot 100000 testfile
>
> ARP broadcast 1
>
> Retry count exceeded; starting again
> ARP broadcast 1
> TFTP from server 192.168.1.105; our IP address is 192.168.1.99
> Filename 'testfile'.
> Load address: 0x100000
> Loading: *T T T T
> Retry count exceeded; starting again
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: tftp on ppcboot 1.1.5

[Wolfgang Denk]

In message <001301c1fbed$0efb5da0$6801a8c0@guoguangacer> you wrote:
>
> I want to use tftp to download file into target machine,but always failed.
...
> ethaddr=00:00:00:01:02:03

Get yourself a valid MAC address.

Also, questions like this are off-topic here; you should ask  PPCBoot
related stuff on the ppcboot-users mailing list.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
The most difficult thing in the world is to know how to  do  a  thing
and to watch someone else doing it wrong, without commenting.
                                                        -- T.H. White

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

8260 and SPI driver

[Julien Eyries]

Hello !

I have searched the archive for an 8260 SPI driver and found some
messages related to this topic, but it seems to me there is currently no
working 8260 SPI driver. could someone confirm me that point ?


thanks,



--
Julien Eyries
R&D engineer
Thales Broadcast & Multimedia (ex-thomcast)
email: julien.eyries@thales-bm.com
fax: 33(0) 1 34 90 31 10
tel: 33(0) 1 34 90 31 01


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/