Re: status of usb audio driver

[Patrick Shirkey <pshirkey@boosthardware.com>]

Patrick Shirkey wrote:
> Patrick Shirkey wrote:
> 
>>
>> i have been testing the sound and I am getting playback although at 
>> this point I can get sound out of hw:2,0 and hw:2,2 they are both the 
>> left channels. The sound is scratchy but it is there :)
>>
> 
> The sound is actually coming through output 2 and 4 on the sound card 
> even though I'm using hw:2,0 or hw:2,2.
> 

When I use the first two pcm devices the sound is sent through output 2 
on the card and when I use the third the sound is sent through output 4.

I have also tested capture and the card is not working with that yet.

It will attempt to record for a few seconds but will not write to a file 
or produce any noise either with direct monitoring enabled or not. Also 
  recording locks the mouse until either it has finished or is ctrl+c'd.





-- 
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================


_______________________________________________________________

Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/