Permission denied on access to files; even as root

Permission denied on access to files; even as root

[Chris Worley]

I've got a couple hundred files that seem to be in a bad state since I
tried (unsuccessfully) converting my file system, for example (as root):

/usr/bin # ls -l gdb
ls: gdb: Permission denied
/usr/bin # mv gdb gdb.bak
mv: cannot stat `gdb': Permission denied
/usr/bin # chmod a+r gdb
chmod: getting attributes of `gdb': Permission denied

Any idea what has happened and how to recover these files?

Thanks,

Chris

Re: Permission denied on access to files; even as root

[Yury Umanets]

Chris Worley wrote:

>I've got a couple hundred files that seem to be in a bad state since I
>tried (unsuccessfully) converting my file system, for example (as root):
>
>/usr/bin # ls -l gdb
>ls: gdb: Permission denied
>/usr/bin # mv gdb gdb.bak
>mv: cannot stat `gdb': Permission denied
>/usr/bin # chmod a+r gdb
>chmod: getting attributes of `gdb': Permission denied
>
>Any idea what has happened and how to recover these files?
>
It means that your filesystem is corrupted. Probably statdata item of 
gdb. Have you tried to fsck it? What did fsck say?

>
>Thanks,
>
>Chris
>
>
>
>  
>

Re: Permission denied on access to files; even as root

[Chris Worley]

Lots of lines like:

	bad_stat_data: 4377 is shared by at least two files

and:

	shrink_id_map: objectid map shrinked: used 4096, 5 blocks

A few:

    bad_stat_data: 960450 is marked free, but used by an object 37421
    960450 0x0 SD

and:

	grow_id_map: objectid map expanded: used 10240, 10 blocks

It's not finished yet.  It's the root partition so it's doing it in
read-only mode.

I'm Running Linux 2.4.10-4GB on SuSE 7.3 with reiserfsprogs-3.x.0j-1
(using 3.5.x disk format...ReiserFS version 3.6.25) atop
lvm-1.0.0.2_rc2-6.  I upgraded reiserfs after a disk crash
last xmas (with a few remnants of that catastrophe still in the system).

I was trying to convert the file system for large files last week, and
wound up deciding that my reiser tools and the kernel patch are not in
sync.

The problem is progressive.  I.e. "/bin/hostname" can't be executed
today, and it was fine after trying the "conv".

Chris

On Sun, 2002-06-16 at 11:20, Yury Umanets wrote:
> Chris Worley wrote:
> 
> >I've got a couple hundred files that seem to be in a bad state since I
> >tried (unsuccessfully) converting my file system, for example (as root):
> >
> >/usr/bin # ls -l gdb
> >ls: gdb: Permission denied
> >/usr/bin # mv gdb gdb.bak
> >mv: cannot stat `gdb': Permission denied
> >/usr/bin # chmod a+r gdb
> >chmod: getting attributes of `gdb': Permission denied
> >
> >Any idea what has happened and how to recover these files?
> >
> It means that your filesystem is corrupted. Probably statdata item of 
> gdb. Have you tried to fsck it? What did fsck say?
> 
> >
> >Thanks,
> >
> >Chris
> >
> >
> >
> >  
> >
> 
> 
> 

Re: Permission denied on access to files; even as root

[Yury Umanets]

Chris Worley wrote:

>Lots of lines like:
>
>	bad_stat_data: 4377 is shared by at least two files
>
>and:
>
>	shrink_id_map: objectid map shrinked: used 4096, 5 blocks
>
>A few:
>
>    bad_stat_data: 960450 is marked free, but used by an object 37421
>    960450 0x0 SD
>
>and:
>
>	grow_id_map: objectid map expanded: used 10240, 10 blocks
>
>It's not finished yet.  It's the root partition so it's doing it in
>read-only mode.
>
This trouble was caused by objectid map fragmentation activity.

>
>I'm Running Linux 2.4.10-4GB on SuSE 7.3 with reiserfsprogs-3.x.0j-1
>(using 3.5.x disk format...ReiserFS version 3.6.25) atop
>lvm-1.0.0.2_rc2-6.  I upgraded reiserfs after a disk crash
>last xmas (with a few remnants of that catastrophe still in the system).
>
Old one. I very recommend you to use last pre4 reiserfsprogs instead 
your current version. Also it is highly recommened to run at least 
2.4.18 kernel or even higher (I'm running 2.4.19-pre10). They are free 
of a lot of bugs.

>
>I was trying to convert the file system for large files last week, and
>wound up deciding that my reiser tools and the kernel patch are not in
>sync.
>
:)) See above.

>
>The problem is progressive.  I.e. "/bin/hostname" can't be executed
>today, and it was fine after trying the "conv".
>

>
>Chris
>
>On Sun, 2002-06-16 at 11:20, Yury Umanets wrote:
>  
>
>>Chris Worley wrote:
>>
>>    
>>
>>>I've got a couple hundred files that seem to be in a bad state since I
>>>tried (unsuccessfully) converting my file system, for example (as root):
>>>
>>>/usr/bin # ls -l gdb
>>>ls: gdb: Permission denied
>>>/usr/bin # mv gdb gdb.bak
>>>mv: cannot stat `gdb': Permission denied
>>>/usr/bin # chmod a+r gdb
>>>chmod: getting attributes of `gdb': Permission denied
>>>
>>>Any idea what has happened and how to recover these files?
>>>
>>>      
>>>
>>It means that your filesystem is corrupted. Probably statdata item of 
>>gdb. Have you tried to fsck it? What did fsck say?
>>
>>    
>>
>>>Thanks,
>>>
>>>Chris
>>>
>>>
>>>
>>> 
>>>
>>>      
>>>
>>
>>    
>>
>
>
>
>
>  
>

Re: Permission denied on access to files; even as root

[Oleg Drokin]

Hello!


On Mon, Jun 17, 2002 at 04:50:33PM -0600, Chris Worley wrote:

> I'm Running Linux 2.4.10-4GB on SuSE 7.3 with reiserfsprogs-3.x.0j-1

Consider upgrading your server otherwise problem will repeat itself.
SuSE update kernel 2.4.16 would be fine for you.

> The problem is progressive.  I.e. "/bin/hostname" can't be executed
> today, and it was fine after trying the "conv".

Yes, newly created files occupy OIDs of already existing ones.

Upgrade kernel and fsck, then run reiserfsck and it will fix the problems.
3.x.1b version of reiserfsprogs would be fine for you.

Bye,
    Oleg

Re: Permission denied on access to files; even as root

[Chris Worley]

So, If I:

    1) compile and install (configured as my previous kernel) the kernel
    kernel-source-2.4.16.SuSE-32.i386.rpm at ftp.suse.com in
    /pub/suse/i386/update/7.3/2.4.16-20020416 and
    
    2) configure/make/install reiserfsprogs-3.x.1b, and 
    
    3) remake my lvm initrd, then 
    
    4) reboot single user and run reiserfsck (no args), 
    
I'll have a working, fixed file system that will have large file
capabilities?

Thanks,

Chris

On Sun, 2002-06-16 at 12:20, Oleg Drokin wrote:
> Hello!
> 
> 
> On Mon, Jun 17, 2002 at 04:50:33PM -0600, Chris Worley wrote:
> 
> > I'm Running Linux 2.4.10-4GB on SuSE 7.3 with reiserfsprogs-3.x.0j-1
> 
> Consider upgrading your server otherwise problem will repeat itself.
> SuSE update kernel 2.4.16 would be fine for you.
> 
> > The problem is progressive.  I.e. "/bin/hostname" can't be executed
> > today, and it was fine after trying the "conv".
> 
> Yes, newly created files occupy OIDs of already existing ones.
> 
> Upgrade kernel and fsck, then run reiserfsck and it will fix the problems.
> 3.x.1b version of reiserfsprogs would be fine for you.
> 
> Bye,
>     Oleg
> 

Re: Permission denied on access to files; even as root

[Chris Worley]

I'm loosing files faster than I can compile.

Just give me a hint: if I can install/compile/lilo SuSE's
kernel-source-2.4.16.SuSE-32.i386.rpm and the listed reiserfs tools,
will my file system be repairable?  Most of /lib /usr/lib /usr/*bin and
/*bin have become unusable.

Thanks,

Chris

On Mon, 2002-06-17 at 18:02, Chris Worley wrote:
> So, If I:
> 
>     1) compile and install (configured as my previous kernel) the kernel
>     kernel-source-2.4.16.SuSE-32.i386.rpm at ftp.suse.com in
>     /pub/suse/i386/update/7.3/2.4.16-20020416 and
>     
>     2) configure/make/install reiserfsprogs-3.x.1b, and 
>     
>     3) remake my lvm initrd, then 
>     
>     4) reboot single user and run reiserfsck (no args), 
>     
> I'll have a working, fixed file system that will have large file
> capabilities?
> 
> Thanks,
> 
> Chris
> 
> On Sun, 2002-06-16 at 12:20, Oleg Drokin wrote:
> > Hello!
> > 
> > 
> > On Mon, Jun 17, 2002 at 04:50:33PM -0600, Chris Worley wrote:
> > 
> > > I'm Running Linux 2.4.10-4GB on SuSE 7.3 with reiserfsprogs-3.x.0j-1
> > 
> > Consider upgrading your server otherwise problem will repeat itself.
> > SuSE update kernel 2.4.16 would be fine for you.
> > 
> > > The problem is progressive.  I.e. "/bin/hostname" can't be executed
> > > today, and it was fine after trying the "conv".
> > 
> > Yes, newly created files occupy OIDs of already existing ones.
> > 
> > Upgrade kernel and fsck, then run reiserfsck and it will fix the problems.
> > 3.x.1b version of reiserfsprogs would be fine for you.
> > 
> > Bye,
> >     Oleg
> > 
> 
> 

Re: Permission denied on access to files; even as root

[Oleg Drokin]

Hello!

On Mon, Jun 17, 2002 at 06:02:19PM -0600, Chris Worley wrote:

>     1) compile and install (configured as my previous kernel) the kernel
>     kernel-source-2.4.16.SuSE-32.i386.rpm at ftp.suse.com in
>     /pub/suse/i386/update/7.3/2.4.16-20020416 and
>     2) configure/make/install reiserfsprogs-3.x.1b, and 
>     3) remake my lvm initrd, then 
>     4) reboot single user and run reiserfsck (no args), 
> I'll have a working, fixed file system that will have large file
> capabilities?

No.
You must boot-off some rescue media.
Because root fs is mounted even in single user mode.

Bye,
    Oleg

Re: Permission denied on access to files; even as root

[Oleg Drokin]

Hello!

On Mon, Jun 17, 2002 at 10:28:55PM -0600, Chris Worley wrote:

> Just give me a hint: if I can install/compile/lilo SuSE's
> kernel-source-2.4.16.SuSE-32.i386.rpm and the listed reiserfs tools,
> will my file system be repairable?  Most of /lib /usr/lib /usr/*bin and
> /*bin have become unusable.

Yes, usually reiserfsck fixes such a problem without any troubles and
all the files are accessible again.

You may even not compile SuSE kernel, but take precompiled one (and the tools
too) from updates. Though I do not know if they have LVM support suitable for
you.

Bye,
    Oleg

Re: Permission denied on access to files; even as root

[Chris Worley]

Long day.  Tried booting into single user mode, and running reiserfsck
with --fix-fixable, it would say it was running in "fixable" mode, but
end saying there were 30000+ files that could be fixed w/
"--fix-fixable"; repeated many times, but the files permissions would
not cooperate.  I finally did a "--rebuild-tree"... there's a few
hundred files in lost+found (much less than the last time I had to
rebuild the tree),  The reiserfs loadable module has debugging turned
on, which might help if there are any problems remaining.

Anyway, the system is up and stable again.  I can create large files
too.

Thanks to all that helped!

Chris

On Sun, 2002-06-16 at 23:13, Oleg Drokin wrote:
> Hello!
> 
> On Mon, Jun 17, 2002 at 10:28:55PM -0600, Chris Worley wrote:
> 
> > Just give me a hint: if I can install/compile/lilo SuSE's
> > kernel-source-2.4.16.SuSE-32.i386.rpm and the listed reiserfs tools,
> > will my file system be repairable?  Most of /lib /usr/lib /usr/*bin and
> > /*bin have become unusable.
> 
> Yes, usually reiserfsck fixes such a problem without any troubles and
> all the files are accessible again.
> 
> You may even not compile SuSE kernel, but take precompiled one (and the tools
> too) from updates. Though I do not know if they have LVM support suitable for
> you.
> 
> Bye,
>     Oleg
>