From: Patrick Shirkey <pshirkey@boosthardware.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Re: USB recording - repetitive peaks
Date: Fri, 05 Jul 2002 01:23:18 +0900 [thread overview]
Message-ID: <3D247676.8090309@boosthardware.com> (raw)
In-Reply-To: s5hpty5ry0y.wl@alsa2.suse.de
Takashi Iwai wrote:
>the hang-up at capture close was at least fixed on cvs.
>it was due to the combination of ASYNC_UNLINK and complete callbacks.
>
>not sure whether the bug with jack is fixed, too, but i think it was
>caused by the same reason. please update the cvs tree.
I can now record successfully using arecord without hanging the system
but now I get an instant lock up while starting ardour. :( I have a
suspicion that it happens when ardour registers with jackd and asks for
the available input devices. (I'm not sure about the sound quality. I
will see if I can generate a test tone to use instead of actual music).
The only way to get out of it is reboot using sysreq.
I will check some more. Please note this wasn't happening so quickly
yesterday.
I'm not sure about the sound quality it is definitely better. I will see
if I can generate a test tone to use instead of actual music.
--
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Caffeinated soap. No kidding.
http://thinkgeek.com/sf
next prev parent reply other threads:[~2002-07-04 16:23 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-01 17:07 [PATCH] USB MIDI driver Clemens Ladisch
2002-07-02 10:36 ` Takashi Iwai
2002-07-02 14:28 ` USB recording - repetitive peaks Patrick Shirkey
2002-07-02 14:57 ` Takashi Iwai
2002-07-02 15:35 ` Patrick Shirkey
2002-07-02 16:03 ` Takashi Iwai
2002-07-02 16:37 ` Patrick Shirkey
2002-07-02 16:39 ` Takashi Iwai
2002-07-02 17:08 ` Patrick Shirkey
2002-07-02 17:29 ` Takashi Iwai
2002-07-02 18:04 ` Patrick Shirkey
2002-07-02 18:26 ` Patrick Shirkey
2002-07-02 18:38 ` Patrick Shirkey
2002-07-04 9:41 ` Takashi Iwai
2002-07-03 8:55 ` Takashi Iwai
2002-07-04 16:23 ` Patrick Shirkey [this message]
2002-07-04 16:26 ` Takashi Iwai
2002-07-04 17:15 ` Patrick Shirkey
2002-07-04 17:27 ` Paul Davis
2002-07-05 13:44 ` Takashi Iwai
2002-07-05 18:19 ` Patrick Shirkey
2002-07-05 18:37 ` Patrick Shirkey
2002-07-04 18:59 ` Thorsten Haas
2002-07-05 6:56 ` Thorsten Haas
2002-07-05 8:34 ` Patrick Shirkey
2002-07-05 8:38 ` Thorsten Haas
2002-07-05 9:06 ` Thorsten Haas
2002-07-05 15:35 ` Takashi Iwai
2002-07-03 5:18 ` Fernando Pablo Lopez-Lezcano
2002-07-03 8:50 ` Takashi Iwai
2002-07-02 16:07 ` Patrick Shirkey
2002-07-02 14:51 ` Re: [PATCH] USB MIDI driver Takashi Iwai
2002-07-02 20:40 ` Pedro Lopez-Cabanillas
2002-07-02 22:10 ` Pedro Lopez-Cabanillas
2002-07-03 12:52 ` Clemens Ladisch
2002-07-03 13:18 ` Takashi Iwai
2002-07-03 14:42 ` Clemens Ladisch
2002-07-04 9:47 ` Takashi Iwai
2002-07-04 11:52 ` Clemens Ladisch
2002-07-05 7:55 ` Clemens Ladisch
2002-07-05 13:40 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2002-07-05 18:11 Re: USB recording - repetitive peaks Patrick Shirkey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D247676.8090309@boosthardware.com \
--to=pshirkey@boosthardware.com \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.