Linux 2.4.20-pre4 blows away Xwindows with Matrox G400 and DRM

Linux 2.4.20-pre4 blows away Xwindows with Matrox G400 and DRM

[Allan Duncan]

It was OK with pre2, went straight to pre4.
Upon running startx I get a fraction of a second of activity before
I'm plunged into an instant reboot.  Inspection of the XFree86.0.log
shows the first and last lines as:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
...
(==) MGA(0): Write-combining range (0xd8000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
<EOF>

A good start continues on:
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) MGA(0): [drm] loaded kernel module for "mga" driver
(II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(II) MGA(0): [drm] added 8192 byte SAREA at 0xe08e2000
(II) MGA(0): [drm] mapped SAREA 0xe08e2000 to 0x40016000
(II) MGA(0): [drm] framebuffer handle = 0xd8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3099; Card 0x102b/0x0525]

Selection from my config:
CONFIG_AGP=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_I810 is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set

#
# DRM 4.1 drivers
#
CONFIG_DRM_NEW=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_MGA=m

Hardware:
Althon 1600+ XP, Matrox G400, VIA KT266A

Re: Linux 2.4.20-pre4 blows away Xwindows with Matrox G400 and DRM

[Alan Cox]

Also look in dmesg - you should see messages about the loading of the
matrox drm module

Re: Linux 2.4.20-pre4 blows away Xwindows with Matrox G400 and DRM

[Allan Duncan]

Alan Cox wrote:
> 
> Also look in dmesg - you should see messages about the loading of the
> matrox drm module

I had a look in var/log/dmesg of a good boot, and that stops logging
when all the partitions are up.  The command "dmesg" goes a little
further and includes the agpgart and drm along with eth0 etc., but
I can't run _that_ on the failed pre4 'cause it reboots instantly.

The last line of /var/log/messages before "restart" for the failed
boot would normally be followed by messages on the start of agpgart
followed by drm.

There is a little in the ksymoops, "start modprobe agpgart safemode=0"
followed by the first line of the next boot.

I forgot to mention before, I'm running ext3, and the Matrox drivers
from 28 Feb 02 (current) on essentially a RedHat 7.3, but with gcc 3.2


Any other logging I could set up?

Re: Linux 2.4.20-pre4 blows away Xwindows with Matrox G400 and DRM

[Allan Duncan]

Additional info at end.

Allan Duncan wrote:
> 
> It was OK with pre2, went straight to pre4.
> Upon running startx I get a fraction of a second of activity before
> I'm plunged into an instant reboot.  Inspection of the XFree86.0.log
> shows the first and last lines as:
> XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 23 January 2002
>         If the server is older than 6-12 months, or if your card is
>         newer than the above date, look for a newer version before
>         reporting problems.  (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
> Build Host: daffy.perf.redhat.com
> ...
> (==) MGA(0): Write-combining range (0xd8000000,0x2000000)
> (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
> (--) MGA(0): 16 DWORD fifo
> (==) MGA(0): Default visual is TrueColor
> (II) MGA(0): [drm] bpp: 16 depth: 16
> (II) MGA(0): [drm] Sarea 2200+664: 2864
> drmOpenDevice: minor is 0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is -1, (No such device)
> drmOpenDevice: Open failed
> drmOpenDevice: minor is 0
> drmOpenDevice: node name is /dev/dri/card0
>  open result is -1, (No such device)
> drmOpenDevice: Open failed
> <EOF>
> 
> A good start continues on:
> drmOpenDevice: minor is 0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 7, (OK)
> drmGetBusid returned ''
> (II) MGA(0): [drm] loaded kernel module for "mga" driver
> (II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
> (II) MGA(0): [drm] added 8192 byte SAREA at 0xe08e2000
> (II) MGA(0): [drm] mapped SAREA 0xe08e2000 to 0x40016000
> (II) MGA(0): [drm] framebuffer handle = 0xd8000000
> (II) MGA(0): [drm] added 1 reserved context for kernel
> (II) MGA(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3099; Card 0x102b/0x0525]
> 
> Selection from my config:
> CONFIG_AGP=m
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_I810 is not set
> CONFIG_AGP_VIA=y
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_SWORKS is not set
> CONFIG_DRM=y
> # CONFIG_DRM_OLD is not set
> 
> #
> # DRM 4.1 drivers
> #
> CONFIG_DRM_NEW=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> CONFIG_DRM_MGA=m
> 
> Hardware:
> Althon 1600+ XP, Matrox G400, VIA KT266A

I have done some more digging, including the same kernel on a second host.
The second box has a K6, VIA MVP3 chipset, and a G200 with 8M, otherwise
the software versions are the same.  It works fine.  Taking the .config
used for that, I redid the kernel on the AthlonXP / VIA KT266a / G400,
almost instant reboot.


One of the crashes was a touch later, and the last few lines from
/var/log/messages was:
Aug 21 20:46:32 localhost login(pam_unix)[1063]: session opened for user alland by LOGIN(uid=0)
Aug 21 20:46:32 localhost  -- alland[1063]: LOGIN ON tty1 BY alland
Aug 21 20:50:22 localhost modprobe: modprobe: Can't locate module char-major-226
Aug 21 20:50:22 localhost modprobe: modprobe: Can't locate module char-major-226
Aug 21 20:50:22 localhost kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Aug 21 20:50:22 localhost kernel: agpgart: Maximum main memory to use for agp memory: 439M
Aug 21 20:50:22 localhost kernel: agpgart: Detected Via Apollo Pro KT266 chipset
Aug 21 20:50:22 localhost kernel: agpgart: AGP aperture is 128M @ 0xd0000000
Aug 21 20:50:22 localhost kernel: [drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 128MB
Aug 21 20:50:22 localhost kernel: [drm] Initialized mga 3.0.2 20010321 on minor 0
Aug 21 20:57:29 localhost syslogd 1.4.1: restart.

The "char-major-226" corresponds to the /dev/dri/card0 above, and the failure point
seems to be when the drmOpenDevice succeeds on the third attempt.

I tried unsetting CONFIG_DRM, but it still fails.

Re: Linux 2.4.20-pre4 blows away Xwindows with Matrox G400 and DRM

[Mike Fedyk]

On Sat, Aug 24, 2002 at 10:43:07PM +1000, Allan Duncan wrote:
> I have done some more digging, including the same kernel on a second host.
> The second box has a K6, VIA MVP3 chipset, and a G200 with 8M, otherwise
> the software versions are the same.  It works fine.  Taking the .config
> used for that, I redid the kernel on the AthlonXP / VIA KT266a / G400,
> almost instant reboot.
> 
> 
> One of the crashes was a touch later, and the last few lines from
> /var/log/messages was:
> Aug 21 20:46:32 localhost login(pam_unix)[1063]: session opened for user alland by LOGIN(uid=0)
> Aug 21 20:46:32 localhost  -- alland[1063]: LOGIN ON tty1 BY alland
> Aug 21 20:50:22 localhost modprobe: modprobe: Can't locate module char-major-226
> Aug 21 20:50:22 localhost modprobe: modprobe: Can't locate module char-major-226
> Aug 21 20:50:22 localhost kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
> Aug 21 20:50:22 localhost kernel: agpgart: Maximum main memory to use for agp memory: 439M
> Aug 21 20:50:22 localhost kernel: agpgart: Detected Via Apollo Pro KT266 chipset
> Aug 21 20:50:22 localhost kernel: agpgart: AGP aperture is 128M @ 0xd0000000
> Aug 21 20:50:22 localhost kernel: [drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 128MB
> Aug 21 20:50:22 localhost kernel: [drm] Initialized mga 3.0.2 20010321 on minor 0
> Aug 21 20:57:29 localhost syslogd 1.4.1: restart.
> 
> The "char-major-226" corresponds to the /dev/dri/card0 above, and the failure point
> seems to be when the drmOpenDevice succeeds on the third attempt.
> 
> I tried unsetting CONFIG_DRM, but it still fails.

I have seen something similar on 2.4.19-pre8-aa3, but I haven't tried to
debug the setup.  I did a hardware reset (software reset would just reboot
after X started again) and was able to avoid the problem.  A few days later
I upgraded it to 2.4.19.  I haven't seen the problem since then, but it has
only been a few days.

00:00.0 Host bridge: Intel Corp. 82820 820 (Camino) Chipset Host Bridge
(MCH) (rev 03)
00:01.0 PCI bridge: Intel Corp. 82820 820 (Camino) Chipset PCI to AGP Bridge
(rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Riva TnT2 [NV5] (rev 11)

Mike