From: Rainer Eisenhofer <Rainer.Eisenhofer@gmx.de>
To: linux-kernel@vger.kernel.org
Subject: aix7xxx scsi problem after 2.4.18
Date: Sat, 07 Sep 2002 14:31:36 +0200 [thread overview]
Message-ID: <3D79F1A8.1060900@gmx.de> (raw)
I have got a problem with the aix7xxx scsi driver contained in kernel
versions > 2.4.18.
My scsi disk based system hangs frequently and I get following errors in
the log:
>>>>>>>>>>
Sep 7 13:52:57 linux kernel: scsi0:0:1:0: Attempting to queue an ABORT
message
Sep 7 13:52:57 linux kernel: scsi0: Dumping Card State while idle, at
SEQADDR 0x7
Sep 7 13:52:57 linux kernel: ACCUM = 0xe0, SINDEX = 0x64, DINDEX =
0x65, ARG_2 = 0xff
Sep 7 13:52:57 linux kernel: HCNT = 0x0 SCBPTR = 0xa
Sep 7 13:52:57 linux kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 7 13:52:57 linux kernel: DFCNTRL = 0x0, DFSTATUS = 0x14
Sep 7 13:52:57 linux kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0
= 0x80
Sep 7 13:52:57 linux kernel: SSTAT0 = 0x0, SSTAT1 = 0xa
Sep 7 13:52:57 linux kernel: STACK == 0xe1, 0x156, 0x186, 0x3
Sep 7 13:52:57 linux kernel: SCB count = 36
Sep 7 13:52:57 linux kernel: Kernel NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: Card NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: QINFIFO entries:
Sep 7 13:53:23 linux kernel: Waiting Queue entries:
Sep 7 13:53:23 linux kernel: Disconnected Queue entries: 10:13
Sep 7 13:53:23 linux kernel: QOUTFIFO entries:
Sep 7 13:53:23 linux kernel: Sequencer Free SCB List: 13 2 3 12 15 9 8
5 11 4 7 6 0 14 1
Sep 7 13:53:23 linux kernel: Sequencer SCB Info: 0(c 0x60, s 0x17, l 0,
t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff)
3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60,
s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l
0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff)
10(c 0x64, s 0x17, l 0, t 0xd) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c
0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x60, s
0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff)
Sep 7 13:53:23 linux kernel: Pending list: 13(c 0x60, s 0x17, l 0)
Sep 7 13:53:23 linux kernel: Kernel Free SCB list: 4 19 8 6 14 1 0 2 5
9 10 12 35 28 15 3 7 29 30 31 24 25 26 27 20 21 22 23 16 17 18 34 33 32
Sep 7 13:53:23 linux kernel: DevQ(0:0:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:1:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:2:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:4:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:5:0): 0 waiting
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Queuing a recovery SCB
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Device is disconnected,
re-queuing SCB
Sep 7 13:53:23 linux kernel: Recovery code sleeping
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Abort Tag Message Sent
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): SCB 13 - Abort Tag Completed.
Sep 7 13:53:23 linux kernel: Recovery SCB completes
Sep 7 13:53:23 linux kernel: Recovery code awake
Sep 7 13:53:23 linux kernel: aic7xxx_abort returns 0x2002
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Attempting to queue an ABORT
message
Sep 7 13:53:23 linux kernel: scsi0: Dumping Card State while idle, at
SEQADDR 0x8
Sep 7 13:53:23 linux kernel: ACCUM = 0xe2, SINDEX = 0x64, DINDEX =
0x65, ARG_2 = 0x2
Sep 7 13:53:23 linux kernel: HCNT = 0x0 SCBPTR = 0xa
Sep 7 13:53:23 linux kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 7 13:53:23 linux kernel: DFCNTRL = 0x0, DFSTATUS = 0x2d
Sep 7 13:53:23 linux kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0
= 0x80
Sep 7 13:53:23 linux kernel: SSTAT0 = 0x5, SSTAT1 = 0xa
Sep 7 13:53:23 linux kernel: STACK == 0xe1, 0xe1, 0x186, 0x3
Sep 7 13:53:23 linux kernel: SCB count = 36
Sep 7 13:53:23 linux kernel: Kernel NEXTQSCB = 13
Sep 7 13:53:23 linux kernel: Card NEXTQSCB = 13
Sep 7 13:53:23 linux kernel: QINFIFO entries:
Sep 7 13:53:23 linux kernel: Waiting Queue entries:
Sep 7 13:53:23 linux kernel: Disconnected Queue entries: 10:11
Sep 7 13:53:23 linux kernel: QOUTFIFO entries:
Sep 7 13:53:23 linux kernel: Sequencer Free SCB List: 13 2 3 12 15 9 8
5 11 4 7 6 0 14 1
Sep 7 13:53:23 linux kernel: Sequencer SCB Info: 0(c 0x60, s 0x17, l 0,
t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff)
3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60,
s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l
0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff)
10(c 0x64, s 0x17, l 0, t 0xb) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c
0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x60, s
0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff)
Sep 7 13:53:23 linux kernel: Pending list: 11(c 0x60, s 0x17, l 0)
Sep 7 13:53:23 linux kernel: Kernel Free SCB list: 4 19 8 6 14 1 0 2 5
9 10 12 35 28 15 3 7 29 30 31 24 25 26 27 20 21 22 23 16 17 18 34 33 32
Sep 7 13:53:23 linux kernel: DevQ(0:0:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:1:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:2:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:4:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:5:0): 0 waiting
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Queuing a recovery SCB
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Device is disconnected,
re-queuing SCB
Sep 7 13:53:23 linux kernel: Recovery code sleeping
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Abort Tag Message Sent
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): SCB 11 - Abort Tag Completed.
Sep 7 13:53:23 linux kernel: Recovery SCB completes
Sep 7 13:53:23 linux kernel: Recovery code awake
Sep 7 13:53:23 linux kernel: aic7xxx_abort returns 0x2002
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Attempting to queue a TARGET
RESET message
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Command not found
Sep 7 13:53:23 linux kernel: aic7xxx_dev_reset returns 0x2002
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Attempting to queue an ABORT
message
Sep 7 13:53:23 linux kernel: scsi0: Dumping Card State while idle, at
SEQADDR 0x7
Sep 7 13:53:23 linux kernel: ACCUM = 0xe4, SINDEX = 0x64, DINDEX =
0x65, ARG_2 = 0x3
Sep 7 13:53:23 linux kernel: HCNT = 0x0 SCBPTR = 0xa
Sep 7 13:53:23 linux kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 7 13:53:23 linux kernel: DFCNTRL = 0x0, DFSTATUS = 0x2d
Sep 7 13:53:23 linux kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0
= 0x80
Sep 7 13:53:23 linux kernel: SSTAT0 = 0x5, SSTAT1 = 0xa
Sep 7 13:53:23 linux kernel: STACK == 0xe1, 0xe1, 0x186, 0x3
Sep 7 13:53:23 linux kernel: SCB count = 36
Sep 7 13:53:23 linux kernel: Kernel NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: Card NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: QINFIFO entries:
Sep 7 13:53:23 linux kernel: Waiting Queue entries:
Sep 7 13:53:23 linux kernel: Disconnected Queue entries: 10:13
Sep 7 13:53:23 linux kernel: QOUTFIFO entries:
Sep 7 13:53:23 linux kernel: Sequencer Free SCB List: 13 2 3 12 15 9 8
5 11 4 7 6 0 14 1
Sep 7 13:53:23 linux kernel: Sequencer SCB Info: 0(c 0x60, s 0x17, l 0,
t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff)
3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60,
s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l
0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff)
10(c 0x64, s 0x17, l 0, t 0xd) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c
0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x60, s
0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff)
Sep 7 13:53:23 linux kernel: Pending list: 13(c 0x60, s 0x17, l 0)
Sep 7 13:53:23 linux kernel: Kernel Free SCB list: 4 19 8 6 14 1 0 2 5
9 10 12 35 28 15 3 7 29 30 31 24 25 26 27 20 21 22 23 16 17 18 34 33 32
Sep 7 13:53:23 linux kernel: DevQ(0:0:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:1:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:2:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:4:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:5:0): 0 waiting
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Queuing a recovery SCB
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Device is disconnected,
re-queuing SCB
Sep 7 13:53:23 linux kernel: Recovery code sleeping
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Abort Tag Message Sent
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): SCB 13 - Abort Tag Completed.
Sep 7 13:53:23 linux kernel: Recovery SCB completes
Sep 7 13:53:23 linux kernel: Recovery code awake
Sep 7 13:53:23 linux kernel: aic7xxx_abort returns 0x2002
<<<<<<<<<<
Everything works fine with kernel 2.4.18 and before, so I don't think
it's a hardware problem.
Because I'm not on the kernel mailing list it would be nice, if you set
me CC to this mail thread.
Thanks,
Rainer
reply other threads:[~2002-09-06 19:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D79F1A8.1060900@gmx.de \
--to=rainer.eisenhofer@gmx.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.