* aix7xxx scsi problem after 2.4.18
@ 2002-09-07 12:31 Rainer Eisenhofer
0 siblings, 0 replies; only message in thread
From: Rainer Eisenhofer @ 2002-09-07 12:31 UTC (permalink / raw)
To: linux-kernel
I have got a problem with the aix7xxx scsi driver contained in kernel
versions > 2.4.18.
My scsi disk based system hangs frequently and I get following errors in
the log:
>>>>>>>>>>
Sep 7 13:52:57 linux kernel: scsi0:0:1:0: Attempting to queue an ABORT
message
Sep 7 13:52:57 linux kernel: scsi0: Dumping Card State while idle, at
SEQADDR 0x7
Sep 7 13:52:57 linux kernel: ACCUM = 0xe0, SINDEX = 0x64, DINDEX =
0x65, ARG_2 = 0xff
Sep 7 13:52:57 linux kernel: HCNT = 0x0 SCBPTR = 0xa
Sep 7 13:52:57 linux kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 7 13:52:57 linux kernel: DFCNTRL = 0x0, DFSTATUS = 0x14
Sep 7 13:52:57 linux kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0
= 0x80
Sep 7 13:52:57 linux kernel: SSTAT0 = 0x0, SSTAT1 = 0xa
Sep 7 13:52:57 linux kernel: STACK == 0xe1, 0x156, 0x186, 0x3
Sep 7 13:52:57 linux kernel: SCB count = 36
Sep 7 13:52:57 linux kernel: Kernel NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: Card NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: QINFIFO entries:
Sep 7 13:53:23 linux kernel: Waiting Queue entries:
Sep 7 13:53:23 linux kernel: Disconnected Queue entries: 10:13
Sep 7 13:53:23 linux kernel: QOUTFIFO entries:
Sep 7 13:53:23 linux kernel: Sequencer Free SCB List: 13 2 3 12 15 9 8
5 11 4 7 6 0 14 1
Sep 7 13:53:23 linux kernel: Sequencer SCB Info: 0(c 0x60, s 0x17, l 0,
t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff)
3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60,
s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l
0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff)
10(c 0x64, s 0x17, l 0, t 0xd) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c
0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x60, s
0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff)
Sep 7 13:53:23 linux kernel: Pending list: 13(c 0x60, s 0x17, l 0)
Sep 7 13:53:23 linux kernel: Kernel Free SCB list: 4 19 8 6 14 1 0 2 5
9 10 12 35 28 15 3 7 29 30 31 24 25 26 27 20 21 22 23 16 17 18 34 33 32
Sep 7 13:53:23 linux kernel: DevQ(0:0:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:1:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:2:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:4:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:5:0): 0 waiting
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Queuing a recovery SCB
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Device is disconnected,
re-queuing SCB
Sep 7 13:53:23 linux kernel: Recovery code sleeping
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Abort Tag Message Sent
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): SCB 13 - Abort Tag Completed.
Sep 7 13:53:23 linux kernel: Recovery SCB completes
Sep 7 13:53:23 linux kernel: Recovery code awake
Sep 7 13:53:23 linux kernel: aic7xxx_abort returns 0x2002
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Attempting to queue an ABORT
message
Sep 7 13:53:23 linux kernel: scsi0: Dumping Card State while idle, at
SEQADDR 0x8
Sep 7 13:53:23 linux kernel: ACCUM = 0xe2, SINDEX = 0x64, DINDEX =
0x65, ARG_2 = 0x2
Sep 7 13:53:23 linux kernel: HCNT = 0x0 SCBPTR = 0xa
Sep 7 13:53:23 linux kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 7 13:53:23 linux kernel: DFCNTRL = 0x0, DFSTATUS = 0x2d
Sep 7 13:53:23 linux kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0
= 0x80
Sep 7 13:53:23 linux kernel: SSTAT0 = 0x5, SSTAT1 = 0xa
Sep 7 13:53:23 linux kernel: STACK == 0xe1, 0xe1, 0x186, 0x3
Sep 7 13:53:23 linux kernel: SCB count = 36
Sep 7 13:53:23 linux kernel: Kernel NEXTQSCB = 13
Sep 7 13:53:23 linux kernel: Card NEXTQSCB = 13
Sep 7 13:53:23 linux kernel: QINFIFO entries:
Sep 7 13:53:23 linux kernel: Waiting Queue entries:
Sep 7 13:53:23 linux kernel: Disconnected Queue entries: 10:11
Sep 7 13:53:23 linux kernel: QOUTFIFO entries:
Sep 7 13:53:23 linux kernel: Sequencer Free SCB List: 13 2 3 12 15 9 8
5 11 4 7 6 0 14 1
Sep 7 13:53:23 linux kernel: Sequencer SCB Info: 0(c 0x60, s 0x17, l 0,
t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff)
3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60,
s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l
0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff)
10(c 0x64, s 0x17, l 0, t 0xb) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c
0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x60, s
0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff)
Sep 7 13:53:23 linux kernel: Pending list: 11(c 0x60, s 0x17, l 0)
Sep 7 13:53:23 linux kernel: Kernel Free SCB list: 4 19 8 6 14 1 0 2 5
9 10 12 35 28 15 3 7 29 30 31 24 25 26 27 20 21 22 23 16 17 18 34 33 32
Sep 7 13:53:23 linux kernel: DevQ(0:0:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:1:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:2:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:4:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:5:0): 0 waiting
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Queuing a recovery SCB
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Device is disconnected,
re-queuing SCB
Sep 7 13:53:23 linux kernel: Recovery code sleeping
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Abort Tag Message Sent
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): SCB 11 - Abort Tag Completed.
Sep 7 13:53:23 linux kernel: Recovery SCB completes
Sep 7 13:53:23 linux kernel: Recovery code awake
Sep 7 13:53:23 linux kernel: aic7xxx_abort returns 0x2002
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Attempting to queue a TARGET
RESET message
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Command not found
Sep 7 13:53:23 linux kernel: aic7xxx_dev_reset returns 0x2002
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Attempting to queue an ABORT
message
Sep 7 13:53:23 linux kernel: scsi0: Dumping Card State while idle, at
SEQADDR 0x7
Sep 7 13:53:23 linux kernel: ACCUM = 0xe4, SINDEX = 0x64, DINDEX =
0x65, ARG_2 = 0x3
Sep 7 13:53:23 linux kernel: HCNT = 0x0 SCBPTR = 0xa
Sep 7 13:53:23 linux kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 7 13:53:23 linux kernel: DFCNTRL = 0x0, DFSTATUS = 0x2d
Sep 7 13:53:23 linux kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0
= 0x80
Sep 7 13:53:23 linux kernel: SSTAT0 = 0x5, SSTAT1 = 0xa
Sep 7 13:53:23 linux kernel: STACK == 0xe1, 0xe1, 0x186, 0x3
Sep 7 13:53:23 linux kernel: SCB count = 36
Sep 7 13:53:23 linux kernel: Kernel NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: Card NEXTQSCB = 11
Sep 7 13:53:23 linux kernel: QINFIFO entries:
Sep 7 13:53:23 linux kernel: Waiting Queue entries:
Sep 7 13:53:23 linux kernel: Disconnected Queue entries: 10:13
Sep 7 13:53:23 linux kernel: QOUTFIFO entries:
Sep 7 13:53:23 linux kernel: Sequencer Free SCB List: 13 2 3 12 15 9 8
5 11 4 7 6 0 14 1
Sep 7 13:53:23 linux kernel: Sequencer SCB Info: 0(c 0x60, s 0x17, l 0,
t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff)
3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60,
s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l
0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff)
10(c 0x64, s 0x17, l 0, t 0xd) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c
0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x60, s
0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff)
Sep 7 13:53:23 linux kernel: Pending list: 13(c 0x60, s 0x17, l 0)
Sep 7 13:53:23 linux kernel: Kernel Free SCB list: 4 19 8 6 14 1 0 2 5
9 10 12 35 28 15 3 7 29 30 31 24 25 26 27 20 21 22 23 16 17 18 34 33 32
Sep 7 13:53:23 linux kernel: DevQ(0:0:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:1:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:2:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:4:0): 0 waiting
Sep 7 13:53:23 linux kernel: DevQ(0:5:0): 0 waiting
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Queuing a recovery SCB
Sep 7 13:53:23 linux kernel: scsi0:0:1:0: Device is disconnected,
re-queuing SCB
Sep 7 13:53:23 linux kernel: Recovery code sleeping
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): Abort Tag Message Sent
Sep 7 13:53:23 linux kernel: (scsi0:A:1:0): SCB 13 - Abort Tag Completed.
Sep 7 13:53:23 linux kernel: Recovery SCB completes
Sep 7 13:53:23 linux kernel: Recovery code awake
Sep 7 13:53:23 linux kernel: aic7xxx_abort returns 0x2002
<<<<<<<<<<
Everything works fine with kernel 2.4.18 and before, so I don't think
it's a hardware problem.
Because I'm not on the kernel mailing list it would be nice, if you set
me CC to this mail thread.
Thanks,
Rainer
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-09-06 19:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-09-07 12:31 aix7xxx scsi problem after 2.4.18 Rainer Eisenhofer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.