* [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ?
@ 2002-10-07 10:55 Peter Karsmakers
2002-10-07 16:49 ` b.gunreben
0 siblings, 1 reply; 6+ messages in thread
From: Peter Karsmakers @ 2002-10-07 10:55 UTC (permalink / raw)
To: parisc-linux
Hi,
I have a HP visualize C240 with a FX4 graphics card. I've mananged to
install linux parisc but can't get the X windows to work. Is my graphics
adapter supported?
The following output is dumped on the screen when I give the xstart command.
Thanks,
Peter Karsmakers
debianC240:~# startx
warning: process set to nice value 0 instead of -10 as requested
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.16-64 parisc64 [ELF]
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 4 16:46:28 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "compaq qvision"
(**) | |-->Device "HP 4FX"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100d
pi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/li
b/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(--) using VT number 7
(--) PCI: (1:4:0) HP unknown chipset (0x1008) rev 2, Mem @ 0xf6000000/25,
BIOS @
0xf1e00000/21
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v,
pm2, pm, 300sx, 500tx, mx, delta
(II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
SIS300, SIS630, SIS540
(II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,
TwisterK
(II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388,
cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4,
tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682,
providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d,
cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d,
cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) FBDev: driver for framebuffer: fbdev, afb
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) imstt: driver (version 1.0.0 for IMS TwinTurbo chipsets : imstt128,
imstt3d
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) v4l driver for Video4Linux
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
XIO: fatal IO error 232 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ?
2002-10-07 10:55 [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ? Peter Karsmakers
@ 2002-10-07 16:49 ` b.gunreben
2002-10-08 22:33 ` Thomas Bogendoerfer
0 siblings, 1 reply; 6+ messages in thread
From: b.gunreben @ 2002-10-07 16:49 UTC (permalink / raw)
To: parisc-linux
Hi,
the FX? Cards are unsupported at the moment. However, if I understand
correctly, there has been a port for x86 linux at times of kernel
2.2.16. I am not a kernel hacker, but I would like to know if there is a
possibility to port the beta quality driver from
http://www.hp.com/workstations/support/software/drivers/linux/video/fxvideo/
to current kernels.
Berthold
Peter Karsmakers wrote:
>
> Hi,
>
> I have a HP visualize C240 with a FX4 graphics card. I've mananged to
> install linux parisc but can't get the X windows to work. Is my graphics
> adapter supported?
>
> The following output is dumped on the screen when I give the xstart command.
>
> Thanks,
>
> Peter Karsmakers
>
> debianC240:~# startx
>
> warning: process set to nice value 0 instead of -10 as requested
>
> This is a pre-release version of XFree86, and is not supported in any
> way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
> to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
> please check the latest version in the XFree86 CVS repository
> (http://www.XFree86.Org/cvs)
>
> XFree86 Version 4.1.0.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 21 December 2001
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.16-64 parisc64 [ELF]
> (==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 4 16:46:28 2002
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "compaq qvision"
> (**) | |-->Device "HP 4FX"
> (**) |-->Input Device "Generic Keyboard"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc104"
> (**) XKB: layout: "us"
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Generic Mouse"
> (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
> Entry deleted from font path.
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100d
> pi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/li
> b/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (--) using VT number 7
>
> (--) PCI: (1:4:0) HP unknown chipset (0x1008) rev 2, Mem @ 0xf6000000/25,
> BIOS @
> 0xf1e00000/21
> (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
> mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
> (II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v,
> pm2, pm, 300sx, 500tx, mx, delta
> (II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325,
> virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
> 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
> trio 3d/2x, 86C362, 86C368
> (II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
> SIS300, SIS630, SIS540
> (II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4,
> Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
> Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,
> TwisterK
> (II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388,
> cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4,
> tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682,
> providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d,
> cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d,
> cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm
> (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
> ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
> ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
> (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
> 3dfx Voodoo3, 3dfx Voodoo5
> (II) FBDev: driver for framebuffer: fbdev, afb
> (II) ATI: ATI driver (version 6.3.6) for chipsets: ati
> (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
> ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
> ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
> ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> ATI Rage 128 Mobility ML (AGP)
> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI Radeon VE (AGP)
> (II) imstt: driver (version 1.0.0 for IMS TwinTurbo chipsets : imstt128,
> imstt3d
> (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
> (II) v4l driver for Video4Linux
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to submit@bugs.debian.org.
>
> XIO: fatal IO error 232 (Connection reset by peer) on X server ":0.0"
> after 0 requests (0 known processed) with 0 events remaining.
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
^ permalink raw reply [flat|nested] 6+ messages in thread
* [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ?
@ 2002-10-08 8:02 Peter Karsmakers
0 siblings, 0 replies; 6+ messages in thread
From: Peter Karsmakers @ 2002-10-08 8:02 UTC (permalink / raw)
To: parisc-linux
This port would be very interesting. I hope someone can help us.
>Hi,
>
>the FX? Cards are unsupported at the moment. However, if I understand
>correctly, there has been a port for x86 linux at times of kernel
>2.2.16. I am not a kernel hacker, but I would like to know if there is a
>possibility to port the beta quality driver from
>http://www.hp.com/workstations/support/software/drivers/linux/video/fxvideo/
>to current kernels.
>
>
>Berthold
>
>>Peter Karsmakers wrote:
> > Hi,
> > I have a HP visualize C240 with a FX4 graphics card. I've mananged to
> install linux parisc but can't get the X windows to work. Is my graphics
> adapter supported?
> > The following output is dumped on the screen when I give the xstart
command.
> > Thanks,
> > Peter Karsmakers
> > debianC240:~# startx
> > warning: process set to nice value 0 instead of -10 as requested
> > This is a pre-release version of XFree86, and is not supported in any
> way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
> to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
> please check the latest version in the XFree86 CVS repository
> (http://www.XFree86.Org/cvs)
> > XFree86 Version 4.1.0.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 21 December 2001
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.16-64 parisc64 [ELF]
> (==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 4 16:46:28 2002
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "compaq qvision"
> (**) | |-->Device "HP 4FX"
> (**) |-->Input Device "Generic Keyboard"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc104"
> (**) XKB: layout: "us"
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Generic Mouse"
> (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
> Entry deleted from font path.
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100d
>
pi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/li
> b/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (--) using VT number 7
> > (--) PCI: (1:4:0) HP unknown chipset (0x1008) rev 2, Mem @ 0xf6000000/25,
> BIOS @
> 0xf1e00000/21
> (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
> mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
> (II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v,
> pm2, pm, 300sx, 500tx, mx, delta
> (II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325,
> virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
> 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
> trio 3d/2x, 86C362, 86C368
> (II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
> SIS300, SIS630, SIS540
> (II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4,
> Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
> Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,
> TwisterK
> (II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388,
> cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4,
> tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682,
> providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d,
> cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d,
> cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm
> (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
> ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
> ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
> (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
> 3dfx Voodoo3, 3dfx Voodoo5
> (II) FBDev: driver for framebuffer: fbdev, afb
> (II) ATI: ATI driver (version 6.3.6) for chipsets: ati
> (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
> ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
> ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
> ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> ATI Rage 128 Mobility ML (AGP)
> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI Radeon VE (AGP)
> (II) imstt: driver (version 1.0.0 for IMS TwinTurbo chipsets : imstt128,
> imstt3d
> (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
> (II) v4l driver for Video4Linux
> (EE) No devices detected.
> > Fatal server error:
> no screens found
> > When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to submit@bugs.debian.org.
> > XIO: fatal IO error 232 (Connection reset by peer) on X server ":0.0"
> after 0 requests (0 known processed) with 0 events remaining.
> > _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ?
2002-10-07 16:49 ` b.gunreben
@ 2002-10-08 22:33 ` Thomas Bogendoerfer
2002-10-08 23:33 ` Tobias Giesen
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Bogendoerfer @ 2002-10-08 22:33 UTC (permalink / raw)
To: b.gunreben; +Cc: parisc-linux
On Mon, Oct 07, 2002 at 06:49:19PM +0200, b.gunreben wrote:
> the FX? Cards are unsupported at the moment. However, if I understand
> correctly, there has been a port for x86 linux at times of kernel
> 2.2.16. I am not a kernel hacker, but I would like to know if there is a
> possibility to port the beta quality driver from
> http://www.hp.com/workstations/support/software/drivers/linux/video/fxvideo/
> to current kernels.
porting the kernel won't help, the X server modules contain all the
important bits. The header file supplied with the kernel sources give
some insides about the FX hardware. But not enough to give an idea
how to setup the framebuffer to a mode, we could use for a simple
framebuffer.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ Alexander Viro on linux-kernel ]
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ?
2002-10-08 22:33 ` Thomas Bogendoerfer
@ 2002-10-08 23:33 ` Tobias Giesen
2002-10-08 23:37 ` Randolph Chung
0 siblings, 1 reply; 6+ messages in thread
From: Tobias Giesen @ 2002-10-08 23:33 UTC (permalink / raw)
To: parisc-linux
Thomas:
> porting the kernel won't help, the X server modules
> contain all the important bits.
... and they are not open source, right? Damn.
And HP is not violating any versions GPL there? Did they build modules
from scratch?
tg
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ?
2002-10-08 23:33 ` Tobias Giesen
@ 2002-10-08 23:37 ` Randolph Chung
0 siblings, 0 replies; 6+ messages in thread
From: Randolph Chung @ 2002-10-08 23:37 UTC (permalink / raw)
To: Tobias Giesen; +Cc: parisc-linux
> > porting the kernel won't help, the X server modules
> > contain all the important bits.
>
> ... and they are not open source, right? Damn.
>
> And HP is not violating any versions GPL there? Did they build modules
> from scratch?
1. xfree86 does not have a GPL license
2. there have been many precedences for binary-only X drivers.
(I'm not saying this is a good thing, mind you...)
randolph
--
Randolph Chung
Debian GNU/Linux Developer, hppa/ia64 ports
http://www.tausq.org/
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-10-08 23:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-10-07 10:55 [parisc-linux] Can't start X-windows on HP C240 with HP FX4 graphics card ? Peter Karsmakers
2002-10-07 16:49 ` b.gunreben
2002-10-08 22:33 ` Thomas Bogendoerfer
2002-10-08 23:33 ` Tobias Giesen
2002-10-08 23:37 ` Randolph Chung
-- strict thread matches above, loose matches on Subject: below --
2002-10-08 8:02 Peter Karsmakers
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.