* pptp-linux and diald
[not found] <20021112221200Z266996-32597+21257@vger.kernel.org>
@ 2002-11-12 21:36 ` Maxim Yakubenko
0 siblings, 0 replies; only message in thread
From: Maxim Yakubenko @ 2002-11-12 21:36 UTC (permalink / raw)
To: linux-diald
Good day!
I'm trying to use diald for automatic
control the pptp connection to my provider.
I can establish connection by issueing the
command:
pon tunnel
This starts pppd and brings up interface ppp0 which
is a pptp tunnel through eth0.
The key pppd option allowed to do this is "pty"
But diald insists to have some interface ti talk to (ttyS0)
How could I solve this problem?
Is this possible (to control pptp interface by diald)?
Best regards,
Maxim Yakubenko
P.S.:
diald-0.99.4
Debian GNU/Linux 3.0
Logs from diald:
Nov 13 01:08:04 localhost diald[547]: Using fifo /var/run/diald.fifo
Nov 13 01:08:04 localhost diald[547]: Proxy device established on
interface tap0
Nov 13 01:08:04 localhost diald[547]: start tap0: SIOCSIFMETRIC:
Operation not s
upported
Nov 13 01:08:04 localhost diald[547]: Diald initial setup completed.
Nov 13 01:09:12 localhost diald[547]: Trigger: icmp 172.16.101.5/257
10.1.1.1/257
Nov 13 01:09:12 localhost diald[547]: Calling site 172.16.101.1
Nov 13 01:09:12 localhost diald[547]: No devices free to call out on.
Nov 13 01:09:12 localhost diald[547]: Connect script failed.
Nov 13 01:09:12 localhost diald[547]: Delaying 1 seconds before clear to
dial.
Nov 13 01:09:13 localhost diald[547]: Calling site 172.16.101.1
Nov 13 01:09:13 localhost diald[547]: No devices free to call out on.
Nov 13 01:09:13 localhost diald[547]: Connect script failed.
Nov 13 01:09:13 localhost diald[547]: Delaying 1 seconds before clear to
dial.
Nov 13 01:09:16 localhost diald[547]: Calling site 172.16.101.1
Nov 13 01:09:16 localhost diald[547]: No devices free to call out on.
Nov 13 01:09:17 localhost diald[547]: Connect script failed.
Nov 13 01:09:17 localhost diald[547]: Delaying 1 seconds before clear to
dial.
Nov 13 01:09:20 localhost diald[547]: Calling site 172.16.101.1
Nov 13 01:09:20 localhost diald[547]: No devices free to call out on.
Nov 13 01:09:21 localhost diald[547]: Connect script failed.
..... and so on.
Another logs of the same process:
Nov 13 01:08:04 localhost diald[546]: Unable to open options file
/etc/diald/dia
ld.options: No such file or directory
Nov 13 01:08:04 localhost diald[546]: Unknown option 'reroute'
Nov 13 01:08:04 localhost diald[547]: Using fifo /var/run/diald.fifo
Nov 13 01:08:04 localhost diald[547]: Proxy device established on
interface tap0
Nov 13 01:08:04 localhost diald[547]: running '/sbin/ifconfig tap0
172.16.101.5
pointopoint 172.16.101.1 broadcast 0.0.0.0 netmask 255.255.255.255
metric 1 mtu
1500 up'
Nov 13 01:08:04 localhost diald[547]: start tap0: SIOCSIFMETRIC:
Operation not s
upported
Nov 13 01:08:04 localhost diald[547]: SIGCHLD[1]: pid 548 system, status 256
Nov 13 01:08:04 localhost diald[547]: start tap0: Establishing routes
for tap0
Nov 13 01:08:04 localhost diald[547]: running '/sbin/route add
172.16.101.1 metr
ic 1 dev tap0'
Nov 13 01:08:04 localhost diald[547]: SIGCHLD[2]: pid 549 system, status 0
Nov 13 01:08:04 localhost diald[547]: running '/sbin/route del
172.16.101.1 metr
ic 0 dev tap0'
Nov 13 01:08:04 localhost diald[547]: SIGCHLD[3]: pid 550 system, status 0
Nov 13 01:08:04 localhost diald[547]: running '/sbin/route add default
metric 1
netmask 0.0.0.0 dev tap0'
Nov 13 01:08:04 localhost diald[547]: SIGCHLD[4]: pid 551 system, status 0
Nov 13 01:08:04 localhost diald[547]: Changed snoop device to tap0
Nov 13 01:08:04 localhost diald[547]: Diald initial setup completed.
Nov 13 01:08:05 localhost diald[547]: --- tick --- state 0 block 0
state_timeout
-1
Nov 13 01:08:36 localhost last message repeated 31 times
Nov 13 01:09:12 localhost last message repeated 36 times
Nov 13 01:09:12 localhost diald[547]: filter accepted rule 39 proto
134624096 le
n 84 packet 172.16.101.5,0 => 10.1.1.1,0
Nov 13 01:09:12 localhost diald[547]: Trigger: icmp 172.16.101.5/257
10.1.1.1/257
Nov 13 01:09:12 localhost diald[547]: Adding connection 0x80628c8 @
1037138952 -
timeout 30
Nov 13 01:09:12 localhost diald[547]: new state CONNECT action 0x8051200
timeout
90
Nov 13 01:09:12 localhost diald[547]: Calling site 172.16.101.1
Nov 13 01:09:12 localhost diald[547]: No devices free to call out on.
Nov 13 01:09:12 localhost diald[547]: Connect script failed.
Nov 13 01:09:12 localhost diald[547]: new state CLOSE action 0x8051a2c
timeout -
1
Nov 13 01:09:12 localhost diald[547]: Delaying 1 seconds before clear to
dial.
Nov 13 01:09:13 localhost diald[547]: --- tick --- state 9 block 0
state_timeout
0
Nov 13 01:09:13 localhost diald[547]: new state RETRY action 0x8051bd8
timeout -
1
Nov 13 01:09:13 localhost diald[547]: filter accepted rule 39 proto
134624096 le
n 84 packet 172.16.101.5,0 => 10.1.1.1,0
Nov 13 01:09:13 localhost diald[547]: Adding connection 0x80628c8 @
1037138953 -
timeout 30
Nov 13 01:09:13 localhost diald[547]: new state DOWN action 0x8051138
timeout -1
Nov 13 01:09:13 localhost diald[547]: new state CONNECT action 0x8051200
timeout
90
Nov 13 01:09:13 localhost diald[547]: Calling site 172.16.101.1
Nov 13 01:09:13 localhost diald[547]: No devices free to call out on.
Nov 13 01:09:13 localhost diald[547]: Connect script failed.
Nov 13 01:09:13 localhost diald[547]: new state CLOSE action 0x8051a2c
timeout -
1
Nov 13 01:09:13 localhost diald[547]: Delaying 1 seconds before clear to
dial.
Nov 13 01:09:14 localhost diald[547]: --- tick --- state 9 block 0
state_timeout
0
Nov 13 01:09:14 localhost diald[547]: new state RETRY action 0x8051bd8
timeout -
1
Nov 13 01:09:15 localhost diald[547]: --- tick --- state 10 block 0
state_timeou
t -1
Nov 13 01:09:15 localhost diald[547]: new state DOWN action 0x8051138
timeout -1
Nov 13 01:09:16 localhost diald[547]: --- tick --- state 0 block 0
state_timeout
................ and so on.
^ permalink raw reply [flat|nested] only message in thread