From: Rafal Cichosz <rcichosz@pt.onet.pl>
To: linux-smp@vger.kernel.org
Subject: Warning unexpected IO-APIC
Date: Tue, 26 Nov 2002 23:23:09 +0100 [thread overview]
Message-ID: <3DE3F44D.9010408@pt.onet.pl> (raw)
[-- Attachment #1: Type: text/plain, Size: 147 bytes --]
hello
Mainboard MSI KT3 Ultra.
Is problem IO-APIC in kernel 2.4.20-rc4
What kernel not problem from function APIC ????
Rafal
rcichosz@pt.onet.pl
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 8422 bytes --]
Linux version 2.4.20-rc4 (root@debian) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 wto lis 26 22:36:00 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000fb940
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 2 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=Lin-2.4.20-rc4 ro root=302 hdd=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1466.742 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2922.90 BogoMIPS
Memory: 256296k/262080k available (1434k kernel code, 5396k reserved, 528k data, 92k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-18, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178002
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0002
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1466.6838 MHz.
..... host bus clock speed is 266.6697 MHz.
cpu: 0, clocks: 2666697, slice: 1333348
CPU0<T0:2666688,T1:1333328,D:12,S:1333348,C:2666697>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI->APIC IRQ transform: (B0,I6,P0) -> 17
PCI->APIC IRQ transform: (B0,I10,P0) -> 17
PCI->APIC IRQ transform: (B0,I17,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P3) -> 19
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: Via IRQ fixup for 00:11.2, from 5 to 3
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
Power Resource: found
Power Resource: found
Power Resource: found
Power Resource: found
ACPI: System firmware supports S0 S1 S3 S4 S5
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
hda: SAMSUNG SV0432A, ATA DISK drive
hdd: CD-RW BCE1610IM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0333dc4, I/O limit 4095Mb (mask 0xffffffff)
hda: 8421840 sectors (4312 MB) w/220KiB Cache, CHS=524/255/63, UDMA(33)
Partition check:
hda: hda1 hda2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 4M @ 0xe0000000
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: checking transaction log (device 03:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 92k freed
Adding Swap: 120452k swap-space (priority -1)
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 22:30:16 Nov 26 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
mice: PS/2 mouse device common for all mice
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: BTC Model: BCE1610IM Rev: A.20
Type: CD-ROM ANSI SCSI revision: 02
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0a.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0xe400. Vers LK1.1.16
next reply other threads:[~2002-11-26 22:23 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-26 22:23 Rafal Cichosz [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-10-26 7:50 WARNING: unexpected IO-APIC BURKHARD JOCHEN
2004-08-11 14:39 Deepak Dogra
2004-08-06 10:19 Chris Kant
2004-06-06 19:18 Graham Wilson
2004-06-05 11:53 Philipp Walderdorff
2004-05-25 5:52 Amedeo Minutolo
2004-02-09 21:07 ,,,
2003-12-22 3:32 Scott Weber
2003-11-12 15:38 Nick Starai
2003-07-28 0:25 Albert Sodyl
2003-06-03 21:51 idiot [James Green]
2003-05-08 15:05 bl8n8r
2003-04-19 21:45 Daniel Bergman
2003-03-10 17:10 Bob Schuknecht
2003-02-28 15:10 Bernard and Jennifer Cohen
2003-02-27 16:51 DR Aldrich
2003-02-21 19:17 Radek Aster
2003-02-16 1:23 rod
2003-02-03 19:35 Matt King
2003-02-04 12:26 ` Alan Cox
2003-01-12 9:24 Sakari Aaltonen
2003-01-09 20:04 Anderson Oliveira da Silva
2003-01-03 20:16 Jeff Frost
2002-12-22 11:53 John Rye
2002-12-25 21:35 ` Alan Cox
2002-12-18 19:48 Kazik
2002-12-04 19:02 Christian Birchinger
2002-11-16 2:50 Chia-Hsing Yu
2002-11-09 3:42 PASTOR Michel
2002-11-09 3:41 PASTOR Michel
2002-10-24 14:58 warning " Thomas Björnell
2002-10-25 9:56 ` Maciej W. Rozycki
2002-10-03 13:33 WARNING: " Brian Jonnes
2002-10-03 13:43 ` David McIlwraith
2002-10-04 6:52 ` Brian Jonnes
2002-10-03 15:02 ` Randy.Dunlap
2002-10-04 6:54 ` Brian Jonnes
2002-10-08 0:40 ` Randy.Dunlap
2002-10-16 13:19 ` Maciej W. Rozycki
2002-10-18 0:59 ` Randy.Dunlap
2002-10-01 22:00 Avinesh Bangar
2002-08-29 16:06 brian
2002-08-14 20:04 james.oden
2002-08-15 1:14 ` Alan Cox
2002-07-17 13:06 countdown
2002-07-12 17:22 dwh
2002-07-12 18:07 ` Alan Cox
2002-07-08 16:31 Enkh Tumenbayar
2002-07-08 18:43 ` WARNING: " Vladimir G. Ivanovic
2002-07-08 20:22 ` E. Robert Bogusta
2002-07-09 16:44 ` Vladimir G. Ivanovic
2002-07-08 13:35 Michael Arndt
2002-06-23 23:29 Josh Wilcox
2002-06-11 10:06 Philipp Schulte
2002-05-15 14:48 Melissa Vandenbrink
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DE3F44D.9010408@pt.onet.pl \
--to=rcichosz@pt.onet.pl \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.