From: David Brownell <david-b@pacbell.net>
To: Luben Tuikov <luben@splentec.com>
Cc: Oliver Neukum <oliver@neukum.name>,
Matthew Dharm <mdharm-scsi@one-eyed-alien.net>,
Mike Anderson <andmike@us.ibm.com>, Greg KH <greg@kroah.com>,
linux-usb-devel@lists.sourceforge.net,
Linux SCSI list <linux-scsi@vger.kernel.org>
Subject: Re: [linux-usb-devel] Re: [PATCH] USB changes for 2.5.58
Date: Mon, 20 Jan 2003 11:50:37 -0800 [thread overview]
Message-ID: <3E2C530D.3000903@pacbell.net> (raw)
In-Reply-To: 3E2C4678.1090508@splentec.com
Luben Tuikov wrote:
> But a removal of a device would probably have to start in top-down
> approach, to free/release/etc resources/etc, rather than a bottom-up
> approach (I just cannot see how this would work...)
Well, the driver model core covers key parts of that. Or it was
at least intended to ... in fact, today I think the bus drivers
(like USB and PCI) need to own the top-down logic for cases like
resume and hub/bridge/adapter (dis)connect. (And their bottom-up
analogues for suspension.)
> In general, I wasn't really discussing hotplugging, I was basically
> hinting that SCSI Core could use a few more functionalities, and that
> some things need to go away.
There does seem to be some consensus on that point, which is
a good place to start!
- Dave
next prev parent reply other threads:[~2003-01-20 19:43 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <10426732153816@kroah.com>
[not found] ` <10426732212871@kroah.com>
[not found] ` <20030116093112.B29001@one-eyed-alien.net>
[not found] ` <20030116173539.GA31235@kroah.com>
2003-01-16 19:43 ` [linux-usb-devel] Re: [PATCH] USB changes for 2.5.58 Matthew Dharm
2003-01-16 19:53 ` Greg KH
[not found] ` <20030116195306.GA32697@kroah.com>
2003-01-16 20:10 ` Linus Torvalds
2003-01-16 20:43 ` greg kh
2003-01-16 21:41 ` Linus Torvalds
2003-01-16 22:51 ` Matthew Dharm
2003-01-16 20:40 ` David Brownell
2003-01-16 20:48 ` Mike Anderson
2003-01-16 23:43 ` Oliver Neukum
2003-01-17 8:50 ` Mike Anderson
2003-01-17 10:55 ` Oliver Neukum
2003-01-17 15:06 ` Alan Stern
2003-01-17 18:54 ` Matthew Dharm
2003-01-17 20:25 ` Mike Anderson
2003-01-17 22:07 ` Oliver Neukum
2003-01-17 20:26 ` [linux-usb-devel] " Oliver Neukum
2003-01-17 20:49 ` Mike Anderson
2003-01-20 17:36 ` Luben Tuikov
2003-01-20 18:23 ` Oliver Neukum
2003-01-20 18:56 ` Luben Tuikov
2003-01-20 19:10 ` [linux-usb-devel] " Oliver Neukum
2003-01-20 19:50 ` David Brownell [this message]
2003-01-21 3:31 ` Alan
2003-01-21 7:17 ` Oliver Neukum
2003-01-21 11:57 ` [linux-usb-devel] " Douglas Gilbert
2003-01-21 13:48 ` Oliver Neukum
2003-01-21 18:22 ` Luben Tuikov
2003-01-21 13:30 ` James Bottomley
2003-01-20 20:08 ` David Brownell
2003-01-20 20:48 ` [linux-usb-devel] " Oliver Neukum
2003-01-20 21:24 ` David Brownell
2003-01-20 21:51 ` [linux-usb-devel] " Oliver Neukum
2003-01-20 22:26 ` David Brownell
2003-01-20 23:00 ` Oliver Neukum
2003-01-21 0:44 ` David Brownell
2003-01-21 0:50 ` Oliver Neukum
2003-01-21 18:16 ` Luben Tuikov
2003-01-21 19:00 ` Oliver Neukum
2003-01-21 20:02 ` [linux-usb-devel] " Luben Tuikov
2003-01-21 21:02 ` Alan Stern
2003-01-22 21:50 ` Luben Tuikov
2003-01-22 22:46 ` Oliver Neukum
2003-01-23 17:46 ` Luben Tuikov
2003-01-23 18:19 ` Oliver Neukum
2003-01-23 19:07 ` Luben Tuikov
2003-01-23 19:40 ` Oliver Neukum
2003-01-23 20:28 ` Doug Ledford
2003-01-23 20:59 ` Oliver Neukum
2003-01-23 21:34 ` Doug Ledford
2003-01-23 22:39 ` Oliver Neukum
2003-01-23 23:23 ` Doug Ledford
2003-01-23 23:25 ` Matthew Dharm
2003-01-24 15:34 ` Alan Stern
2003-01-24 16:06 ` Oliver Neukum
2003-01-24 17:58 ` [linux-usb-devel] " Doug Ledford
2003-01-24 19:00 ` Luben Tuikov
2003-01-24 22:23 ` Oliver.Neukum
2003-01-24 19:10 ` Luben Tuikov
2003-01-24 19:56 ` [linux-usb-devel] " Alan Stern
2003-01-24 20:11 ` Luben Tuikov
2003-01-24 21:09 ` Luben Tuikov
2003-01-24 21:55 ` Alan Stern
2003-01-24 22:03 ` Luben Tuikov
2003-01-24 23:21 ` Mike Anderson
2003-01-24 21:48 ` Doug Ledford
2003-01-24 22:59 ` Mike Anderson
2003-01-24 23:17 ` [linux-usb-devel] " Doug Ledford
2003-01-25 0:24 ` Luben Tuikov
2003-01-25 1:35 ` Mike Anderson
2003-01-24 23:25 ` Matthew Dharm
2003-01-25 0:05 ` Doug Ledford
2003-01-25 0:45 ` Matthew Dharm
2003-01-25 1:07 ` Doug Ledford
2003-02-02 18:13 ` Matthew Dharm
2003-02-02 20:06 ` Matthew Dharm
2003-02-03 17:17 ` Mike Anderson
2003-02-16 21:18 ` Matthew Dharm
2003-02-17 19:37 ` Mike Anderson
2003-02-17 19:51 ` Patrick Mansfield
2003-02-23 7:48 ` Matthew Dharm
2003-02-26 23:37 ` Mike Anderson
2003-02-27 1:10 ` Matthew Dharm
2003-02-27 6:37 ` Mike Anderson
2003-02-27 19:32 ` Matthew Dharm
2003-03-01 1:41 ` Matthew Dharm
2003-02-02 3:49 ` Matthew Dharm
2003-01-25 1:24 ` Luben Tuikov
2003-01-24 0:15 ` Patrick Mansfield
2003-01-24 8:33 ` David Brownell
2003-01-23 20:41 ` A different look at block device hotswap in the Linux kernel Steven Dake
2003-01-23 21:07 ` Matthew Jacob
2003-01-23 21:06 ` Steven Dake
2003-01-23 21:16 ` Matthew Jacob
2003-01-24 0:07 ` Oliver Neukum
2003-01-24 0:21 ` Matthew Jacob
2003-01-24 7:53 ` David Brownell
2003-01-24 15:26 ` Matthew Jacob
2003-01-24 0:54 ` Steven Dake
2003-01-24 2:35 ` [linux-usb-devel] " Matthew Dharm
2003-01-22 21:30 ` [linux-usb-devel] Re: [PATCH] USB changes for 2.5.58 David Brownell
2003-01-20 22:16 ` Luben Tuikov
2003-01-20 22:51 ` David Brownell
2003-01-20 23:27 ` Oliver Neukum
2003-01-22 12:07 Bennie J. Venter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E2C530D.3000903@pacbell.net \
--to=david-b@pacbell.net \
--cc=andmike@us.ibm.com \
--cc=greg@kroah.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
--cc=luben@splentec.com \
--cc=mdharm-scsi@one-eyed-alien.net \
--cc=oliver@neukum.name \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.