Re: dosemu - serial printing problems

Re: dosemu - serial printing problems

[Stas Sergeev]

Hello.

Christian Fischer wrote:
 > i'm runnig dosemu 1.0.1.0
Upgrade.

> dosemu is configured to:
> $_com3="/dev/ttyS2"
> $_irqpassing = ""
> under ms-dos everything works fine on the same machine.
> can anyone help me?
Produce a -D9+s log and send it to
me compressed, and maybe I'll be
able to figure out what's going wrong.
But only if your problem persists
after upgrading a dosemu.

Re: dosemu - serial printing problems

[Christian Fischer]

--On Samstag, 1. Februar 2003 05:00 +0300 Stas Sergeev <stssppnn@yahoo.com> 
wrote:

> Hello.
>
> Christian Fischer wrote:
>  > i'm runnig dosemu 1.0.1.0
> Upgrade.

hi stas, hi all

i've upgraded to dosemu 1.0.2.1, everything works fine. wht's the reason?
thanks a lot.

christian
---------------------------------------------------------------------------
---

Fisch+Fischer Veranstaltungstechnik
Christian Fischer
Karl-Liebknecht-Strafle 24
98693 Ilmenau

Fon: +49 3677 / 844 519
Fax: +49 3677 / 844 520
Funk: +49 172 / 851 33 06

mail: christian.fischer@FischUndFischer.com

-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

dosemu - serial printing problems

[Christian Fischer]

i'm runnig dosemu 1.0.1.0 (suse linux 7.2, ms-dos 6.22).
printer is an canon tm-u200d (9600,n,8,1) on com3 (/dev/ttyS2), there's no 
other choice. from commandline <echo test > com3:> works perfectly.

running the dos-software:
1. step: ini2v24.com (reset printer, load german charset, print 
welcomestring) - printing perfectly
2. step: bu.exe - prints welcomestring perfectly, after that no printing 
possible.

maybe waiting for any signal (ready ?) from printer ?

dosemu is configured to:
$_com3="/dev/ttyS2"
$_irqpassing = ""

under ms-dos everything works fine on the same machine.
can anyone help me?

christian
---------------------------------------------------------------------------
---

Fisch+Fischer Veranstaltungstechnik
Christian Fischer
Karl-Liebknecht-Strafle 24
98693 Ilmenau

Fon: +49 3677 / 844 519
Fax: +49 3677 / 844 520
Funk: +49 172 / 851 33 06

mail: christian.fischer@FischUndFischer.com

-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html