* Kernel booting
@ 2003-02-19 3:05 Srini Amble
0 siblings, 0 replies; only message in thread
From: Srini Amble @ 2003-02-19 3:05 UTC (permalink / raw)
To: linuxppc-embedded
Dear All,
I have an MPC 850 board with PPCBoot on it. The console is on SMC2 and
is set for 9600 baud. I have built the kernel using ELDK 2.0.2. make
mrproper, make xconfig, make dep, and followed by make pImage were the
sequence of commands I used for generating the kernel. I have modified
some of the files in "include/asm-ppc" and "arch/ppc" directories to
account for board specificity. Using TFTP I download the kernel to the
target from my host. When I issue "bootm" command the boot loader
decompresses the kernel image and loads it into SDRAM. I see the message
"...Control is being turned over to Kernel..." and after that there is
no activity on the console. Would any kind soul have any suggestions as
to how I can proceed to debug the problem?
Thanks for all your help
Srini
P.S. If someone can list all the files that need to be modified to
account for a non-supported board then it will be much appreciated.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-02-19 3:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-02-19 3:05 Kernel booting Srini Amble
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.