Promise 202XX: neither IDE port enabled

Promise 202XX: neither IDE port enabled

[Carl-Daniel Hailfinger]

Hello all,

[CC:ed all people who had problems with CONFIG_PDC202XX_FORCE]

I'm currently debugging these Promise Fasttrak recognition problems.
PDC20270: neither IDE port enabled (BIOS)
is one of those pesky messages you will see if it doesn't work.
Could you (if you have the hardware) please test 2.4.21-pre7 with

CONFIG_PDC202XX_FORCE=y

in your .config? If you prefer using the frontends for configuration, 
the option is labeled

"Special FastTrak Feature"

and set it to Y.
If enabling this option causes any problems, please tell me.
Note: this message is about 2.4.21-pre7 (and later) ONLY.

Thank you for testing this.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org

Re: Promise 202XX: neither IDE port enabled

[kernel]

On Sat, 5 Apr 2003, Carl-Daniel Hailfinger wrote:

> CONFIG_PDC202XX_FORCE=y
>
> "Special FastTrak Feature"
>
> and set it to Y.

this does work :

PDC20270: IDE controller at PCI slot 03:01.0
PDC20270: chipset revision 2
PDC20270: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0x9040-0x9047, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0x9048-0x904f, BIOS settings: hdg:pio, hdh:pio
    ide4: BM-DMA at 0x90c0-0x90c7, BIOS settings: hdi:pio, hdj:pio
    ide5: BM-DMA at 0x90c8-0x90cf, BIOS settings: hdk:pio, hdl:pio
PDC20267: IDE controller at PCI slot 05:06.0
PCI: Found IRQ 11 for device 05:06.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
    ide6: BM-DMA at 0xb800-0xb807, BIOS settings: hdm:pio, hdn:pio
    ide7: BM-DMA at 0xb808-0xb80f, BIOS settings: hdo:pio, hdp:pio

wasn't the 'CONFIG_PDC202XX_FORCE' to enable fasttrak support istead of
using it like an Ultra controller ?

 *  Linux kernel will misunderstand FastTrak ATA-RAID series as Ultra
 *  IDE Controller, UNLESS you enable "CONFIG_PDC202XX_FORCE"
 *  That's you can use FastTrak ATA-RAID controllers as IDE controllers.

Re: Promise 202XX: neither IDE port enabled

[Andre Hedrick]

It is designed to allow you to overide a FastTrack BIOS that disables a
few items in pci-config space.  Regardless if you have a FastTrack or
Ultra, if enabled the device can be registered.  If you have a FastTrack
and want to use ata-raid by Arjan V. and not the OEM scsi binary driver,
you must enable the override.  If you want to use the OEM scsi binary
driver with FastTrack, do not set the override.  Ultra's do not care.
If they do it is a BUG!

Cheers,

On Sat, 5 Apr 2003 kernel@ddx.a2000.nu wrote:

> On Sat, 5 Apr 2003, Carl-Daniel Hailfinger wrote:
> 
> > CONFIG_PDC202XX_FORCE=y
> >
> > "Special FastTrak Feature"
> >
> > and set it to Y.
> 
> this does work :
> 
> PDC20270: IDE controller at PCI slot 03:01.0
> PDC20270: chipset revision 2
> PDC20270: not 100% native mode: will probe irqs later
>     ide2: BM-DMA at 0x9040-0x9047, BIOS settings: hde:pio, hdf:pio
>     ide3: BM-DMA at 0x9048-0x904f, BIOS settings: hdg:pio, hdh:pio
>     ide4: BM-DMA at 0x90c0-0x90c7, BIOS settings: hdi:pio, hdj:pio
>     ide5: BM-DMA at 0x90c8-0x90cf, BIOS settings: hdk:pio, hdl:pio
> PDC20267: IDE controller at PCI slot 05:06.0
> PCI: Found IRQ 11 for device 05:06.0
> PDC20267: chipset revision 2
> PDC20267: not 100% native mode: will probe irqs later
> PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
> Mode.
>     ide6: BM-DMA at 0xb800-0xb807, BIOS settings: hdm:pio, hdn:pio
>     ide7: BM-DMA at 0xb808-0xb80f, BIOS settings: hdo:pio, hdp:pio
> 
> wasn't the 'CONFIG_PDC202XX_FORCE' to enable fasttrak support istead of
> using it like an Ultra controller ?
> 
>  *  Linux kernel will misunderstand FastTrak ATA-RAID series as Ultra
>  *  IDE Controller, UNLESS you enable "CONFIG_PDC202XX_FORCE"
>  *  That's you can use FastTrak ATA-RAID controllers as IDE controllers.
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Andre Hedrick
LAD Storage Consulting Group

Re: Promise 202XX: neither IDE port enabled

[Andre Hedrick]

It is messy because there is no way to commit parameters passed to change
the contents of static initdata, iirc.  However I need to think about this
more.

Cheers,

On Sat, 5 Apr 2003, Markus Kossmann wrote:

> On Saturday 05 April 2003 13:02, Andre Hedrick wrote:
> > It is designed to allow you to overide a FastTrack BIOS that disables a
> > few items in pci-config space.  Regardless if you have a FastTrack or
> > Ultra, if enabled the device can be registered.  If you have a FastTrack
> > and want to use ata-raid by Arjan V. and not the OEM scsi binary driver,
> > you must enable the override.  If you want to use the OEM scsi binary
> > driver with FastTrack, do not set the override.  Ultra's do not care.
> > If they do it is a BUG!
> >
> Wouldn't it be better to have the CONFIG_PDC20XXX_FORCE option as kernel 
> parameter , which is settable at boot time ? 
> According to Murphys Law you either get a precompiled kernel with that option 
> disabled but you want/have to use Arjans drivers. Or the Option is enabled 
> but you prefer to use the driver from Promise.   
> -- 
> Markus Kossmann markus.kossmann@inka.de
> 

Andre Hedrick
LAD Storage Consulting Group