* 2.4.21-pre7, disk size, display wrong or serious bug?
@ 2003-04-06 0:52 Andreas Behnert
0 siblings, 0 replies; only message in thread
From: Andreas Behnert @ 2003-04-06 0:52 UTC (permalink / raw)
To: linux-scsi
Yesterday I installed an external RAID system, machine
was running kernel 2.2.20 and everything worked ok:
~snip~
SCSI device sdb: hdwr sector= 512 bytes. Sectors=1278558208
[624296 MB] [624.3 GB]
~snip~
Then I compiled 2.4.21-pre7 using the old sym53c8xx driver:
~snip~
SCSI device sdb: 1278558208 512-byte hdwr sectors (-444889 MB)
~snip~
and then again using the new sym53c8xx-2 driver:
~snip~
SCSI device sdb: 1278558208 512-byte hdwr sectors (-444889 MB)
~snip~
The system *seems* to work ok but I don't know if it really
*does* - I didn't want to experiment very much because the
RAID array contains sensitive data and pulling the files
back from tape takes forever. Unfortunately kernel 2.4.x
will become a must in the near future for this system ...
Is it just the display of the value that is wrong or is this
something I should really worry about?
I don't want to flood this list so I put complete dmesg output
for all three kernel variants on a website in case somebody
want's to have a look at it:
http://www.schachtziege.de/sym53c8xx.html
Thank you,
Regards,
Andreas
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-04-06 0:40 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-04-06 0:52 2.4.21-pre7, disk size, display wrong or serious bug? Andreas Behnert
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.