* Linux & DMA transfer (applied to 8245)
@ 2003-04-24 14:58 Callebaut Benoit
0 siblings, 0 replies; only message in thread
From: Callebaut Benoit @ 2003-04-24 14:58 UTC (permalink / raw)
To: linuxppc-embedded
Hi ,
I am implementing DMA transfers initiated by the processor for the MPC8245.
Since the standard pci_alloc_consistent take only a pci_dev structure but no
addresses, I added a configuration function to set the target address (PCI)
and the other parameters.
I can see that the DMA transfer is started, and finished (an interrupt is
generated) but I don't see the data copied on the target device ( DSP with a 4
MB memory window on PCI bus.)
My question is : What type of addreess must I give to configure the DMA
controller.
Are there also caching issues that may prevent good read/write operation
s? I suppose that the flushing og the cache done in pci_alloc_consistent is
enough.
Thanks
------------------------------------------------------------------------------
----
Benoit Callebaut
Software Development Engineer
Barco | Control Rooms
Noordlaan 5, 8520 Kuurne, Belgium
Tel +32(0)56 36 84 28
Fax +32(0)56 36 86 05
mailto:benoit.callebaut@barco.com
http://www.barcocontrolrooms.com
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-04-24 14:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-04-24 14:58 Linux & DMA transfer (applied to 8245) Callebaut Benoit
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.