From: Mark Frey <markfrey@sympatico.ca>
To: Demetre Valaris <sv1uy@sv1uy.ampr.org>
Cc: linux-diald@vger.kernel.org
Subject: Re: PAPA/CHAP again???
Date: Tue, 20 May 2003 07:25:03 -0400 [thread overview]
Message-ID: <3ECA108F.1080604@sympatico.ca> (raw)
In-Reply-To: <3EC9C7CB.18160.BCF7A65@localhost>
Hi Demetre,
Try a rule like this near the top of your filters:
ignore any ip.protocol=pim
Hope that helps!
Mark.
Demetre Valaris wrote:
> On 19 May 2003 at 22:45, Mark Frey wrote:
>
>
>>Hi Demetre,
>>
>>Your new ISP does not require a login before ppp starts. The junk you
>>see in the log (and when dialing with minicom) is the ppp negotiation
>>starting. Edit your connect script so it finishes after receiving
>>CONNECT - remove the lines expecting 'sername:' and 'assword:' and
>>anything else after that.
>>
>>Mark.
>
>
> Hi Mark,
>
> Thanks a lot. It works now. I just have this problem of the link not going
> down after 4 minutes or so due to the multicast packets this ISP sends me
> every half a minute.
>
> See my previous message please. Any ideas on this please? They are igmp and
> pim V2 hello packets. DIALD can ignore the igmp but the pim V2 hello are not
> ognored by DIALD.
>
> ===
> 73 de Demetre SV1UY
> e-mail: sv1uy at sv1uy.ampr.org
> PACKET MAIL: SV1UY@SV1UY.ATH.GRC.EURO
> http://www.athnet.ampr.org/~sv1uy
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2003-05-20 11:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-18 16:53 PAPA/CHAP again??? Demetre Valaris
2003-05-20 2:45 ` Mark Frey
2003-05-20 3:14 ` Demetre Valaris
2003-05-20 11:25 ` Mark Frey [this message]
2003-05-20 12:22 ` Demetre Valaris
[not found] ` <3ECAB91C.3090905@sympatico.ca>
2003-05-21 5:37 ` PAP/CHAP again??? Demetre Valaris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ECA108F.1080604@sympatico.ca \
--to=markfrey@sympatico.ca \
--cc=linux-diald@vger.kernel.org \
--cc=sv1uy@sv1uy.ampr.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.