All of lore.kernel.org
 help / color / mirror / Atom feed
* PAPA/CHAP again???
@ 2003-05-18 16:53 Demetre Valaris
  2003-05-20  2:45 ` Mark Frey
  0 siblings, 1 reply; 6+ messages in thread
From: Demetre Valaris @ 2003-05-18 16:53 UTC (permalink / raw)
  To: linux-diald

Hi guys,

I seem to be lost a bit here with PAP/CHAP and DIALD. 
I use Diald Version 1.0 and I had to change ISPs to one that needs PAP or CHAP 
authentication.

Up to now all worked OK for me but since I changed ISP it does not. I can 
connect to this new ISP with WVDIAL which means that my /etc/ppp/pap-secrets 
and /etc/ppp/chap-secrets files work OK.

But when I try to  connect with my DIALD it fails.
My /etc/diald/internet/connect file contains the line:

pppd-options       noipdefault
pppd-options       name      sv1uy

where sv1uy is my login name to this ISP.

Here is an extract of my /var/log/messages file whenever I try to connect 
using DIALD. 

Could anyone possibly help??? I have read the instructions (RTFM hi hi hi) but 
I cannot find any answers!!!


-------------------------------------------------------
May 18 19:31:40 nest-0 diald[1253]: connector: send (ATM1^M)
May 18 19:31:40 nest-0 diald[1253]: connector: expect (OK)
May 18 19:31:40 nest-0 diald[1253]: connector: ^M
May 18 19:31:40 nest-0 diald[1253]: connector: ATM1^M^M
May 18 19:31:40 nest-0 diald[1253]: connector: OK
May 18 19:31:40 nest-0 diald[1253]: connector:  -- got it
May 18 19:31:40 nest-0 diald[1253]: connector: send (ATDT8962500000^M)
May 18 19:31:41 nest-0 diald[1253]: connector: timeout set to 60 seconds
May 18 19:31:41 nest-0 diald[1253]: connector: expect (CONNECT)
May 18 19:31:41 nest-0 diald[1253]: connector: ^M
May 18 19:32:06 nest-0 diald[1253]: connector: ATDT8962500000^M^M
May 18 19:32:06 nest-0 diald[1253]: connector: CONNECT
May 18 19:32:06 nest-0 diald[1253]: connector:  -- got it
May 18 19:32:06 nest-0 diald[1253]: connector: abort on (NO CARRIER)
May 18 19:32:06 nest-0 diald[1253]: connector: abort on (NO DIALTONE)
May 18 19:32:06 nest-0 diald[1253]: connector: abort on (NO DIAL TONE)
May 18 19:32:06 nest-0 diald[1253]: connector: abort on (Busy)
May 18 19:32:06 nest-0 diald[1253]: connector: abort on (VOICE)
May 18 19:32:06 nest-0 diald[1253]: connector: abort on (RING\r)
May 18 19:32:06 nest-0 diald[1253]: connector: expect (sername:)
May 18 19:32:06 nest-0 diald[1253]: connector:  49333/ARQ/V90/LAPM/V42BIS^M
May 18 19:32:10 nest-0 diald[1253]: connector: ~^?}#@!}!	} }8}"}&} }*} } 
}#}$@#}%}&}>^UOG}'}"}(}"}2F~~^?}#@!}!
May 18 19:32:12 nest-0 diald[1253]: connector: } }8}"}&} }*} } 
}#}$@#}%}&}>^UOG}'}"}(}"XT~~^?}#@!}!^K} }8}"}&} }*} } }#}$@#}%}&}>^U
May 18 19:32:16 nest-0 diald[1253]: connector: OG}'}"}(}"^Q]~~^?}#@!}!^L} 
}8}"}&} }*} } }#}$@#}%}&}>^UOG}'}"}(}"]x~~^?}#@!}!^M} }8}"}
May 18 19:32:18 nest-0 diald[1253]: connector: &} }*} } 
}#}$@#}%}&}>^UOG}'}"}(}"}4q~~^?}#@!}!^N} }8}"}&} }*} } }#}$@#}%}&}>^UOG}'}"
May 18 19:32:22 nest-0 diald[1253]: connector: }(}"^c~~^?}#@!}!^O} }8}"}&} }*} 
} }#}$@#}%}&}>^UOG}'}"}(}"^Wj~~^?}#@!}!^P} }8}"}&} }*}
May 18 19:32:24 nest-0 diald[1253]: connector:  } 
}#}$@#}%}&}>^UOG}'}"}(}"O}]~~^?}#@!}!^Q} }8}"}&} }*} } 
}#}$@#}%}&}>^UOG}'}"}(}"}&
May 18 19:32:28 nest-0 diald[1253]: connector: t~~^?}#@!}!^R} }8}"}&} }*} } 
}#}$@#}%}&}>^UOG}'}"}(}"Lf~^M
May 18 19:32:28 nest-0 diald[1253]: connector: NO CARRIER
May 18 19:32:28 nest-0 diald[1253]: connector:  -- failed
May 18 19:32:28 nest-0 diald[1253]: connector: Failed (NO CARRIER)
May 18 19:32:28 nest-0 diald[1253]: Connect script failed.
May 18 19:32:29 nest-0 diald[1253]: Delaying 10 seconds before clear to dial.
May 18 19:32:36 nest-0 diald[1253]: FIFO: link down request
-------------------------------------------------------------------------------

I tried to use minicom to connect and see if I get any sort of prompt but I 
get the same garbage instead of a ligin prompt.

I suspect it has something to do with my configuration since the ISP probably 
expects something else from me and I am not giving it to him, since my WVDIAL 
script connects OK every time. I even copied the AT init commands that my 
WVDIAL script uses and used them to my /usr/share/diald/modem/generic file so 
that it is not a matter of COMPRESSION ERRORS but no joy.

I would appreciate any help on this one guys!!!

Thanks in advance.

===
73 de Demetre SV1UY
e-mail:      sv1uy at sv1uy.ampr.org
PACKET MAIL: SV1UY@SV1UY.ATH.GRC.EURO
http://www.athnet.ampr.org/~sv1uy



^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-05-21  5:37 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-05-18 16:53 PAPA/CHAP again??? Demetre Valaris
2003-05-20  2:45 ` Mark Frey
2003-05-20  3:14   ` Demetre Valaris
2003-05-20 11:25     ` Mark Frey
2003-05-20 12:22       ` Demetre Valaris
     [not found]         ` <3ECAB91C.3090905@sympatico.ca>
2003-05-21  5:37           ` PAP/CHAP again??? Demetre Valaris

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.